Eduard Kimmari

https://www.etis.ee/CV/Eduard_Kimmari/est
21.09.1977
+372 55607170
+372 6203347
eduard.kimmari@ttu.ee

Teenistuskäik

Haridustee
2003–2008   
Tallinna Tehnikaülikool, Mehaanikateaduskond, doktoriõpe
2001–2003   
Tallinna Tehnikaülikool, Mehaanikateaduskond, magistriõpe
1996–2001   
Tallinna Tehnikaülikool, Mehaanikateaduskond, bakalaureuseõpe

Kvalifikatsioon

Teaduskraadid
Eduard Kimmari, doktorikraad, 2008, (juh) Lembit Kommel, Exothermically synthesized B4C-Al composites for dry sliding (Eksotermiliselt sünteesitud B4C-Al komposiidid tööks liugehõõrdumise tingimustes), Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut.
Eduard Kimmari, magistrikraad (teaduskraad), 2003, (juh) Lembit Kommel; Lembit Kommel, Boorkarbiidsete kermiste hõõrdekulumine, Tallinna Tehnikaülikool.
 
 
Teadustöö põhisuunad
VALDKOND: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus
 
 
Lisainfo
Volitatud mehaanikainsener
Täiendusõpe:
19.06.14 - Keevitustootmise uued määrused ja standardid. Keevitustootmise kaasaegsed tendentsid. GSI SLV Baltikum, Tallinn.
26.02.14 - ISO/IEC 17065:2012. Nõuded asutustele, kes sertifitseerivad tooteid, protsesse ja teenuseid. Eesti Standardikeskus, Tallinn.
10.12.13-11.12.13 - Keevitusstandardid. EN ISO 9606-1. Ülevaade keevitajate atesteerimise standardist. GSI SLV Baltikum, Tallinn.
22.04.10-23.04.10 - Thermo-Calc Basic&Advanced koolitus; Thermo-Calc Software, Stockholm.
17.12.08-16.01.09 - Pedagoogika ja õppemetoodika, II moodul; TTÜ.
26.02.07-25.06.07 - Rahvusvahelise/Euroopa keevitusinseneri kursus; Saksamaa Keevitusühing (DVS).
23.10.06-28.10.06 - Keevituskonstruktsioonide projekteerimine; Saksamaa Keevitusühing (DVS).
01.12.05-26.02.06 - Pedagoogika ja õppemetoodika, I moodul; TTÜ.
20.10.05-21.10.05 - Keevitusstandardid, Eesti Masinatööstuse Liit.
Euroopa / rahvusvaheline keevitusinsener EWE / IWE

Jooksvad projektid

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2014
Podgursky, V.; Hantschel, T.; Bogatov, A.; Kimmari, E.; Antonov, M.; Viljus, M.; Mikli, V.; Tsigkourakos, M.; Vandervorst, W.; Buijnsters, J.; Raadik, A.; Kulu, P. (2014). Rippling on Wear Scar Surfaces of Nanocrystalline Diamond Films After Reciprocating Sliding Against Ceramic Balls. Tribology Letters, 55 (3), 493−501.10.1007/s11249-014-0379-z.
1.1.
2013
Kimmari, E.; Podgursky, V.; Simunin, M.; Adoberg, E.; Surženkov, A.; Viljus, M.; Hartelt, M.; Wäsche, R.; Sildos, I.; Kulu, P. (2013). Tribological behavior of carbon nanofibers deposited on hard nanocomposite (nc-Ti1-xAlxN)/(a-Si3N4) coating. Surface & Coatings Technology, 225, 21−25.10.1016/j.surfcoat.2013.03.011.
1.1.
2012
Kommel, L.; Kimmari, E.; Viljus, M.; Traksmaa, R.; Volobueva, o.; Kommel, I. (2012). Phases Micromechanical Properties of Ni-base Superalloy Mesured by Nanoindentation. Materials Science (Medžiagotyra), 18 (1), 28−33.10.5755/j01.ms.18.1.1337.
3.1.
2012
Kommel, Lembit; Metsvahi, Raido; Viljus, Mart; Kimmari, Eduard; Kolju, Karl; Traksmaa, Rainer (2012). Design of Superhard c-BC2N-precipitates in B4C/Al-composites through SHS and Heat Treatment. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering : 19-21st April 2012, Tallinn, Estonia., II: 8th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING" 19-21 April 2012, Tallinn, Estonia. _EditorsAbbr T. Otto. Tallinn University of Technology, 645−650.
1.1.
2011
Podgursky, V.; Adoberg, E.; Surženkov, A.; Kimmari, E.; Viljus, M.; Mikli, V.; Hartelt, M.; Wäsche, R.; Šíma, M.; Kulu, P. (2011). Dependence of the friction coefficient on roughness parameters during early stage fretting of (Al,Ti)N coated surfaces. Wear, 271, 853−858.10.1016/j.wear.2011.03.006.
3.1.
2011
Sergejev, F.; Kimmari, E.; Viljus, M. (2011). Residual Stresses in TiC-based Cermets Measured by Indentation. In: Mario Guagliano, Laura Vergani (Ed.). 11th International Conference on the Mechanical Behavior of Materials (ICM11) (2873−2881).. Elsevier.10.1016/j.proeng.2011.04.477.
5.2.
2010
Hussainova, I.; Kimmari, E.; Kollo, L.; Jasiuk, I. (2010). Microstructure and mechanical characterization of WC-based composites doped by zirconia. Proceedings of 16th International Conference on Mechanics of Composite Materials, MCM 2010, May 24-28, Riga, CD-ROM: 16th International Conference on Mechanics of Composite Materials, MCM 2010, May 24-28, Riga, Latvia. Ed. V. Tamuzs. Institute of Polymer Mechanics, Latvia,.
1.2.
2009
Kimmari, E.; Hussainova, I.; Smirnov, A.; Traksmaa, R.; Preis, I. (2009). Processing and microstructural characterization of WC based cermets doped by ZrO2. Estonian Journal of Engineering, 15 (4), 275−282.
1.1.
2008
Kommel, Lembit; Kimmari, Eduard (2008). Multiphase Forming in Lightweight Composites during SHS Reaction. Materials Science (Medžiagotyra), 14 (3), 242−246.
2.3.
2008
Kimmari, E. (2008). Exothermically synthesized B4C-Al composites for dry sliding. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: Tallinn University of Technology Press.
3.1.
2008
Kommel, L.; Kimmari, E. (2008). Solid phase`s transformations in boron carbide based composites during heat treatment. Čermák, J.; Stloukal, I. (_EditorsAbbr). Solid Phase Transformations (175−180).. Trans Tech Publications Ltd. (Solid State Phenomena; 138).
3.1.
2008
Kimmari, E.; Kommel, L. (2008). Thermally induced cracking in aluminum/boron carbide composite. In: Kütner, R. (_EditorsAbbr). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (467−472).. Tallinn: Tallinn University of Technology.
3.1.
2008
Antonov, M.; Hussainova, I; Kimmari, E.; Juhani, K. (2008). Verification of new 1000C tester designed for investigation of wear-corrosion properties of advanced materials for high temperature applications. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (395−399).. Tallinn: Tallinn University of Technology.
3.2.
2008
Juhani, K.; Kimmari, E.; Kommel, L. (2008). Preparation of Multiphase Ligthweigth c-BN-Based Composite. Proceedings of Euro PM2008, 1: European Powder Metallurgy Conference & Exhibition Euro PM2008, Mannheim, Germany, 28.09-1.10.2008. European Powder Metallurgy Association, 231−236.
5.2.
2007
Kommel, L.; Kimmari, E. (2007). Wear resistance behavior of light-weight composites. Abstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007: XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007, October 25-26, Riga, Latvia. _EditorsAbbr Grabits, J.; Krastins, J. Riga: Riga Technical University, 22.
1.2.
2006
Kimmari, E.; Kommel, L. (2006). Application of the continuous indentation test method for the characterization of mechanical properties of B4C/Al composites. Proceedings of the Estonian Academy of Sciences. Engineering, 4, 399−407.
1.2.
2006
Kommel, L.; Kimmari, E. (2006). Boron carbide based composites manufacturing and recycling features. Materials Science (Medžiagotyra), 12 (1), 48−52.
3.1.
2006
Kimmari, E.; Kommel, L. (2006). Dry Sliding Friction of Cubic Boron Nitride Based Composite Synthesized by SHS. 12th Nordic Tribology Symposium NORDTRIB 2006, Helsingor, Denmark, 6-9 June 2006.
1.2.
2005
Kommel, Lembit; Kimmari, Eduard (2005). Investigations of structure and tribological properties of the lightweight c-BN-based composites. Materials Science, 11 (4), 394−397.
5.2.
2005
Hussainova, I.; Kommel, L.; Kübarsepp, J.; Kimmari, E. (2005). Tribological properties of boron nitride based composites. Proceedings of the WTC2005 World Tribology Congress III - 2005: World Tribology Congress III - 2005, September 12-16, 2005, Washington, D.C. (USA). ASME Publications, 53−54.
5.2.
2005
Kommel, L.; Kübarsepp, J.; Hussainova, I.; Kimmari, E. (2005). Structure and properties of boron nitride based composite - produced by SHS method. Proc. of Fifth International Conference on Composite Science and Technology (ICCST/5): Fifth International Conference on Composite Science and Technology (ICCST/5), 1-3 February 2005 Sharjah, United Arab Emirates,School of Engineering, American University of Sharjah. Unaited Arab Emirates, 461−466.
3.4.
2004
Kommel, L.; Kimmari, E. (2004). Recycling of light weight B4C based composites. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia: 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn. Tallinn: Tallinn University of Technology, 199−202.
1.2.
2003
Kommel, L.; Kimmari, E. (2003). Friction and wear changes of boron carbide cermets depending on the structure. Materials Science, 1, 51−53.
1.2.
2003
Kommel, L.; Veinthal, R.; Kimmari, E. (2003). The Formation of Structure and Change of Properties during Heat Treatment of Boron Carbide Cermets. Materials Science, 9 (1), 99−101.
1.2.
2003
Kommel, L.; Traksmaa, R.; Kimmari, E. (2003). Influence of binder composition and microhardness on wear properties of lightweight composites. Powder metallurgy progress, 3 (3), 140−145.
5.2.
2003
Kommel, L.; Kimmari, E. (2003). Formation of the Nanomeasures Refractory Compounds in the B4C Based Composites and Their Influence on Wear Resistance. Proceedings of the Joint Nordic Conference in Powder Technology, February 5-6, 2003 in Tampere, Finland: Joint Nordic Conference in Powder Technology, Tampere, February 5-6, 2003. Tampere University of Technology,.
5.2.
2003
Kommel, L.; Kimmari, E.; Traksmaa, R. (2003). Effect of attrition milling on grain size and properties of composites. 12th International Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : October 2-3, 2003, Tallinn, Estonia : abstracts: Engineering materials and tribology: Baltmattrib-2003, international Baltic conference, Tallinn, October 2-3, 2003. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 25.
3.1.
2002
Kommel, L.; Kimmari, E. (2002). The Formation of Wear Resistant Properties of Boron Carbide Cermet. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME", DAAAM : 25-27 April 2002, Tallinn, Estonia: 3rd International Conference "Industrial Engineering - New Challenges to SME", Tallinn, 25-27 April 2002. Tallinn: Tallinn Technical University, 165−168.
3.4.
2002
Kommel, L.; Traksmaa, R.; Kimmari, E. (2002). The Influence of Refractory Compositions in Binder Phase on Wear Properties of Boron Carbide/Aluminium Composites. Proceedings of the 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002 : [CD-ROM]: 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002. Stockholm, 11.
5.1.
2002
Kommel, Lembit; Hussainova, Irina; Kimmari, Eduard (2002). The structure and properties forming in boron carbide/aluminium composite during processing. Advances in Powder Metallurgy and Particulate Materials: Hard Metals/ Refractory metals/ Composite, 6. Metal Powder Industry Publications, 8−15.
5.2.
2001
Kommel, L.; Hussainova, I.; Kimmari, E. (2001). Wear and Friction in Boron Carbide Cermet-Steel Sliding System. WTC 2001 : [CD-ROM]: WTC 2001, Vienna, Austria, 03-07 September 2001. University of Vienna, 93.
22.04.2019

Eduard Kimmari

https://www.etis.ee/CV/Eduard_Kimmari/eng
21.09.1977
+372 55607170
+372 6203347
eduard.kimmari@ttu.ee

Career

Education
2003–2008   
Tallinn University of Technology, PhD study
2001–2003   
Tallinn Technical University, Faculty of Mechanical Engineering, master study;
1996–2001   
Tallinn University of Technology, Faculty of Mechanical Engineering, bachelor study

Qualifications

Academic degrees
Eduard Kimmari, Doctor's Degree, 2008, (sup) Lembit Kommel, Exothermically synthesized B4C-Al composites for dry sliding, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering.
Eduard Kimmari, Master's Degree, 2003, (sup) Lembit Kommel; Lembit Kommel, Boorkarbiidsete kermiste hõõrdekulumine (Sliding Friction of Boron Carbide Based Cermets), Tallinn University of Technology.
 
 
Field of research
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science
 
 
Additional information
Chartered Mechanical Engineer
Special Courses:
19.06.14 - Regulations and standards in welding industry. Current isseus and perspectives. GSI SLV Baltikum, Tallinn, Estonia
26.02.14 - ISO/IEC 17065:2012. Requirements for bodies certifying products, processes and services. Estonian Centre for Standartisation,Tallinn, Estonia.
10.12.13-11.12.13 - Welding Standards. EN ISO 9606-1. Overview of the new features in the welder qualification. GSI SLV Baltikum,Tallinn, Estonia.
22.04.10-23.04.10 - Thermo-Calc Basic&Advanced course; Thermo-Calc Software, Stockholm, Sweden.
17.12.08-16.01.09 - Pedagogics and teaching techniques, II module; Tallinn University of Technology, Tallinn, Estonia.
26.02.07-25.06.07 - International/European welding engineer course; German Welding Society (DVS), Rostock, Germany.
23.10.06-28.10.06 - Design of welded constructions; German Welding Society (DVS), Rostock, Germany.
01.12.05-26.02.06 - Pedagogics and teaching techniques, I module; Tallinn University of Technology, Tallinn, Estonia.
20.10.05-21.10.05 - Welding Standards, Federation of Estonia Engineering Industry, Tallinn, Estonia.
European / International Welding Engineer EWE / IWE

Projects in progress

Publications

Category
Year
Publication
 
1.1.
2014
Podgursky, V.; Hantschel, T.; Bogatov, A.; Kimmari, E.; Antonov, M.; Viljus, M.; Mikli, V.; Tsigkourakos, M.; Vandervorst, W.; Buijnsters, J.; Raadik, A.; Kulu, P. (2014). Rippling on Wear Scar Surfaces of Nanocrystalline Diamond Films After Reciprocating Sliding Against Ceramic Balls. Tribology Letters, 55 (3), 493−501.10.1007/s11249-014-0379-z.
1.1.
2013
Kimmari, E.; Podgursky, V.; Simunin, M.; Adoberg, E.; Surženkov, A.; Viljus, M.; Hartelt, M.; Wäsche, R.; Sildos, I.; Kulu, P. (2013). Tribological behavior of carbon nanofibers deposited on hard nanocomposite (nc-Ti1-xAlxN)/(a-Si3N4) coating. Surface & Coatings Technology, 225, 21−25.10.1016/j.surfcoat.2013.03.011.
1.1.
2012
Kommel, L.; Kimmari, E.; Viljus, M.; Traksmaa, R.; Volobueva, o.; Kommel, I. (2012). Phases Micromechanical Properties of Ni-base Superalloy Mesured by Nanoindentation. Materials Science (Medžiagotyra), 18 (1), 28−33.10.5755/j01.ms.18.1.1337.
3.1.
2012
Kommel, Lembit; Metsvahi, Raido; Viljus, Mart; Kimmari, Eduard; Kolju, Karl; Traksmaa, Rainer (2012). Design of Superhard c-BC2N-precipitates in B4C/Al-composites through SHS and Heat Treatment. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering : 19-21st April 2012, Tallinn, Estonia., II: 8th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING" 19-21 April 2012, Tallinn, Estonia. _EditorsAbbr T. Otto. Tallinn University of Technology, 645−650.
1.1.
2011
Podgursky, V.; Adoberg, E.; Surženkov, A.; Kimmari, E.; Viljus, M.; Mikli, V.; Hartelt, M.; Wäsche, R.; Šíma, M.; Kulu, P. (2011). Dependence of the friction coefficient on roughness parameters during early stage fretting of (Al,Ti)N coated surfaces. Wear, 271, 853−858.10.1016/j.wear.2011.03.006.
3.1.
2011
Sergejev, F.; Kimmari, E.; Viljus, M. (2011). Residual Stresses in TiC-based Cermets Measured by Indentation. In: Mario Guagliano, Laura Vergani (Ed.). 11th International Conference on the Mechanical Behavior of Materials (ICM11) (2873−2881).. Elsevier.10.1016/j.proeng.2011.04.477.
5.2.
2010
Hussainova, I.; Kimmari, E.; Kollo, L.; Jasiuk, I. (2010). Microstructure and mechanical characterization of WC-based composites doped by zirconia. Proceedings of 16th International Conference on Mechanics of Composite Materials, MCM 2010, May 24-28, Riga, CD-ROM: 16th International Conference on Mechanics of Composite Materials, MCM 2010, May 24-28, Riga, Latvia. Ed. V. Tamuzs. Institute of Polymer Mechanics, Latvia,.
1.2.
2009
Kimmari, E.; Hussainova, I.; Smirnov, A.; Traksmaa, R.; Preis, I. (2009). Processing and microstructural characterization of WC based cermets doped by ZrO2. Estonian Journal of Engineering, 15 (4), 275−282.
1.1.
2008
Kommel, Lembit; Kimmari, Eduard (2008). Multiphase Forming in Lightweight Composites during SHS Reaction. Materials Science (Medžiagotyra), 14 (3), 242−246.
2.3.
2008
Kimmari, E. (2008). Exothermically synthesized B4C-Al composites for dry sliding. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: Tallinn University of Technology Press.
3.1.
2008
Kommel, L.; Kimmari, E. (2008). Solid phase`s transformations in boron carbide based composites during heat treatment. Čermák, J.; Stloukal, I. (_EditorsAbbr). Solid Phase Transformations (175−180).. Trans Tech Publications Ltd. (Solid State Phenomena; 138).
3.1.
2008
Kimmari, E.; Kommel, L. (2008). Thermally induced cracking in aluminum/boron carbide composite. In: Kütner, R. (_EditorsAbbr). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (467−472).. Tallinn: Tallinn University of Technology.
3.1.
2008
Antonov, M.; Hussainova, I; Kimmari, E.; Juhani, K. (2008). Verification of new 1000C tester designed for investigation of wear-corrosion properties of advanced materials for high temperature applications. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (395−399).. Tallinn: Tallinn University of Technology.
3.1.
2008
Kommel, L.; Kimmari, E. (2008). Multiphase microstructure forming purpose in lightweight composites. Proceedings of thd 6th International Conference of DAAAM Baltic, Industrial Engineering, 2: Thd 6th International Conference of DAAAM Baltic, Industrial Engineering, 24-26th April 2008, Tallinn, Estonia. _EditorsAbbr R. Küttner. Tallinn University of Technology, 479−484.
3.2.
2008
Juhani, K.; Kimmari, E.; Kommel, L. (2008). Preparation of Multiphase Ligthweigth c-BN-Based Composite. Proceedings of Euro PM2008, 1: European Powder Metallurgy Conference & Exhibition Euro PM2008, Mannheim, Germany, 28.09-1.10.2008. European Powder Metallurgy Association, 231−236.
5.2.
2007
Kommel, L.; Kimmari, E. (2007). Wear resistance behavior of light-weight composites. Abstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007: XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007, October 25-26, Riga, Latvia. _EditorsAbbr Grabits, J.; Krastins, J. Riga: Riga Technical University, 22.
1.2.
2006
Kimmari, E.; Kommel, L. (2006). Application of the continuous indentation test method for the characterization of mechanical properties of B4C/Al composites. Proceedings of the Estonian Academy of Sciences. Engineering, 4, 399−407.
1.2.
2006
Kommel, L.; Kimmari, E. (2006). Boron carbide based composites manufacturing and recycling features. Materials Science (Medžiagotyra), 12 (1), 48−52.
3.1.
2006
Kimmari, E.; Kommel, L. (2006). Dry Sliding Friction of Cubic Boron Nitride Based Composite Synthesized by SHS. 12th Nordic Tribology Symposium NORDTRIB 2006, Helsingor, Denmark, 6-9 June 2006.
1.2.
2005
Kommel, Lembit; Kimmari, Eduard (2005). Investigations of structure and tribological properties of the lightweight c-BN-based composites. Materials Science, 11 (4), 394−397.
5.2.
2005
Hussainova, I.; Kommel, L.; Kübarsepp, J.; Kimmari, E. (2005). Tribological properties of boron nitride based composites. Proceedings of the WTC2005 World Tribology Congress III - 2005: World Tribology Congress III - 2005, September 12-16, 2005, Washington, D.C. (USA). ASME Publications, 53−54.
5.2.
2005
Kommel, L.; Kübarsepp, J.; Hussainova, I.; Kimmari, E. (2005). Structure and properties of boron nitride based composite - produced by SHS method. Proc. of Fifth International Conference on Composite Science and Technology (ICCST/5): Fifth International Conference on Composite Science and Technology (ICCST/5), 1-3 February 2005 Sharjah, United Arab Emirates,School of Engineering, American University of Sharjah. Unaited Arab Emirates, 461−466.
3.4.
2004
Kommel, L.; Kimmari, E. (2004). Recycling of light weight B4C based composites. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia: 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn. Tallinn: Tallinn University of Technology, 199−202.
1.2.
2003
Kommel, L.; Kimmari, E. (2003). Friction and wear changes of boron carbide cermets depending on the structure. Materials Science, 1, 51−53.
1.2.
2003
Kommel, L.; Veinthal, R.; Kimmari, E. (2003). The Formation of Structure and Change of Properties during Heat Treatment of Boron Carbide Cermets. Materials Science, 9 (1), 99−101.
1.2.
2003
Kommel, L.; Traksmaa, R.; Kimmari, E. (2003). Influence of binder composition and microhardness on wear properties of lightweight composites. Powder metallurgy progress, 3 (3), 140−145.
5.2.
2003
Kommel, L.; Kimmari, E. (2003). Formation of the Nanomeasures Refractory Compounds in the B4C Based Composites and Their Influence on Wear Resistance. Proceedings of the Joint Nordic Conference in Powder Technology, February 5-6, 2003 in Tampere, Finland: Joint Nordic Conference in Powder Technology, Tampere, February 5-6, 2003. Tampere University of Technology,.
5.2.
2003
Kommel, L.; Kimmari, E.; Traksmaa, R. (2003). Effect of attrition milling on grain size and properties of composites. 12th International Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : October 2-3, 2003, Tallinn, Estonia : abstracts: Engineering materials and tribology: Baltmattrib-2003, international Baltic conference, Tallinn, October 2-3, 2003. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 25.
3.1.
2002
Kommel, L.; Kimmari, E. (2002). The Formation of Wear Resistant Properties of Boron Carbide Cermet. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME", DAAAM : 25-27 April 2002, Tallinn, Estonia: 3rd International Conference "Industrial Engineering - New Challenges to SME", Tallinn, 25-27 April 2002. Tallinn: Tallinn Technical University, 165−168.
3.4.
2002
Kommel, L.; Traksmaa, R.; Kimmari, E. (2002). The Influence of Refractory Compositions in Binder Phase on Wear Properties of Boron Carbide/Aluminium Composites. Proceedings of the 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002 : [CD-ROM]: 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002. Stockholm, 11.
5.1.
2002
Kommel, Lembit; Hussainova, Irina; Kimmari, Eduard (2002). The structure and properties forming in boron carbide/aluminium composite during processing. Advances in Powder Metallurgy and Particulate Materials: Hard Metals/ Refractory metals/ Composite, 6. Metal Powder Industry Publications, 8−15.
5.2.
2001
Kommel, L.; Hussainova, I.; Kimmari, E. (2001). Wear and Friction in Boron Carbide Cermet-Steel Sliding System. WTC 2001 : [CD-ROM]: WTC 2001, Vienna, Austria, 03-07 September 2001. University of Vienna, 93.
22.04.2019
Detailne otsing
  • Leitud 13 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
IUTIUT19-29 Mitmeastmeliselt struktureeritud keraamika-baasil komposiitmaterjalid kasutamiseks ekstreemtingimustes 01.01.201431.12.2019Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond; Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 1 770 000,00 EUR
ETFETF6660Aineosakeste vaheliste vastasmõjude selgitamine multifunktsionaalsete (tööstus-) materjalide väljatöötamiseks.01.01.200631.12.2009Ants LõhmusTartu Ülikool, Loodus- ja tehnoloogiateaduskond, Tartu Ülikooli Füüsika Instituut; Tartu Ülikool, Loodus- ja tehnoloogiateaduskond51 934,09 EUR
MUUV313 (LT/05/B/F/PP-171014)Euroopa tasemel keevitusspetsialistide õppeprogrammide arendamine01.10.200530.09.2007Andres LaansooTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool22 743,98 EUR
MUUGERA219Faasi ekviliibriumi (tasakaalu) nihe nanoteralistes materjalides.01.09.201231.12.2013Lembit KommelTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool48 678,00 EUR
MUUF9068Isemäärivad süsiniknanokiudude (CNF) tribopinded01.05.200930.04.2011Vitali PodgurskiTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool123 800,12 EUR
ETFETF6163Kaasaegsete materjalide nanostruktuuri disain01.01.200531.12.2008Irina HussainovaTallinna Tehnikaülikool, Mehaanikateaduskond40 682,40 EUR
SFSF0142505s03Kulumiskindlad materjalid ja kulumine01.01.200331.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond668 100,42 EUR
MUUAR12129Kõrgtehnoloogilised ioonvedeliku/nanoosakeste komposiidil baseeruva kulumiskindlad kattekihid tööstuslikeks rakendusteks01.08.201230.06.2015Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut80 196,00 EUR
SFSF0140062s08Mitmefaasiliste tribomaterjalide arendamine ja tehnoloogia01.01.200831.12.2013Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond1 259 299,69 EUR
MUUAR12133NanoCom – Nanogeomeetria ja struktuurne põimumine kõrgete talitusomadustega keraamika-baasil nanokomposiitide disainimisel ja prototüüpimisel (NanoCom)01.08.201230.06.2015Jakob KübarseppTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool461 841,93 EUR
MUUF11022PECVD tehnoloogia spetsiifiliste lisanditega teemantpinnete sadestamiseks01.03.201131.05.2011Vitali PodgurskiTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool11 110,00 EUR
ETFETF7889Tehnomaterjalide ja aurustussadestatud kõvapinnete väsimusmehaanika uurimine01.01.200931.12.2012Fjodor SergejevTallinna Tehnikaülikool, Mehaanikateaduskond59 080,21 EUR
MUUF9030Uued komposiitmaterjalid mittemääritavatele tribologiliste rakendustele01.04.200908.07.2009Irina HussainovaTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool12 077,26 EUR