See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Heinrich Klaasen

https://www.etis.ee/CV/Heinrich_Klaasen/est
15.02.1929
6203359
53465638
heinrich.klaasen@cv.eris.ee

Teenistuskäik

Töökohad ja ametid
1999–2005   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Vanemteadur (0,75)
01.01.1994–31.12.1999   
AMP Eesti AS, osakonnajuhataja
01.01.1989–31.12.1994   
Ettevõtte SHTAMP, peaspetsialist
01.01.1959–31.12.1988   
Elektrotehnika Tead. Uurim. ja Projekt. Instituut, vanemteadur, laborijuhataja
01.01.1954–31.12.1958   
Uraali Polütehniline Instituut, aspirant, vaneminsener
 
 
Haridustee
1954–1958   
Uraali Polütehniline Instituut, aspirantuur
1949–1953   
Tallinna Polütehniline Instituut (TPI), mehaanikainsener
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
Eesti Mehaanikainseneride Liidu juhatuse liige
Eesti Materjalitehnika Ühingu juhatuse liige

Kvalifikatsioon

Teaduskraadid
Heinrich Klaasen, doktorikraad, 1996, (juh) , Kõvasulamite töökindlus metallide survega töötlemisel, Tallinna Tehnikaülikool, Mehaanikateaduskond.
 
 
Teaduspreemiad ja tunnustused
1998, Heinrich Klaasen, Eesti Vabariigi volitatud insener
1980, Heinrich Klaasen, NSVL Rahvamajandussaavutuste näituse kuldmedal
1976, Heinrich Klaasen, NSVL Rahvamajandussaavutuste näituse pronksmedal
 
 
Lisainfo
Tehnikateaduste kandidaat (1961)
Kiievi Polütehniline Instituut
Tehnikateaduste doktor(1996)
Tallinna Tehnikaülikool

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2011
Sergejev, F.; Klaasen, H.; Kübarsepp, J.; Preis, I.. (2011). Fatigue mechanics of carbide composites. International Journal of Materials and Product Technology, 40, 140−163.10.1504/IJMPT.2011.037210.
1.1.
2009
Klaasen, H.; Kübarsepp, J.; Sergejev, F. (2009). Strength and failure of TiC based cermets. Powder Metallurgy, 52 (2), 111−115. DOI: 10.1179/174329008X315575.
1.1.
2008
Roosaar, T.; Kübarsepp, J.; Klaasen, H.; Viljus, M. (2008). Wear Performance of TiC-base Cermets. Materials Science (Medžiagotyra), 14 (3), 238−241.
3.1.
2008
Roosaar, T.; J.Kübarsepp, J.; Klaasen, H.; Viljus, M. (2008). Adhesion wear performance of carbide-base composites. Proceedings of the 13th Nordic Symposium in Tribology, Nordtrib 2008, Tampere, Finland: 13th Nordic Symposium in Tribology, Nordtrib 2008, June 10-13, 2008, Tampere, Finland. Ed. Kleemola, J.; Lehtovaara, A. Tampere University of Technology, 10 pp.
3.2.
2008
Klaasen, H.; Kübarsepp, J.; Roosaar, T.; Sergejev, F.; Talkop, A. (2008). Performance of carbide composites in cyclic loading conditions. Proceedings of Euro PM2008, 1: European Powder Metallurgy Conference & Exhibition Euro PM2008, Mannheim, Germany, 28.09-1.10.2008. European Powder Metallurgy Association, 237−242.
1.1.
2007
Klaasen, H.; Kollo, L.; Kübarsepp, J. (2007). Mechanical properties and wear performance of compression sintered TiC-base cermets. Powder Metallurgy, 50 (2), 132−136.
1.1.
2007
Klaasen, H.; Kübarsepp, J. (2007). Performance of carbide composites for cyclic loading applications. International Journal of Materials & Product Technology, 28, 399−424. DOI: 10.1504/IJMPT.2007.013087.
3.1.
2007
Kübarsepp, J.; Klaasen, H.; Sergejev, F. (2007). Performance of cemented carbides in cyclic loading wear conditions. In: Progress in Powder Metallurgy (1221−1224).. Trans Tech Publications Ltd. (Materials Science Forum ; 534-536).
3.2.
2007
Kübarsepp, J.; Klaasen, H.; Roosaar, T.; Viljus, M.; Traksmaa, R. (2007). Abrasive wear performance of carbide based composites. Proceedings of European Powder Metallurgy Congress EURO PM2007, 1: International Powder Metallurgy Congress & Exhibition EURO PM2007, Toulouse (France), 15-17 October 2007. European Powder Metallurgy Association, 221−226.
3.2.
2007
Klaasen, H.; Kollo, L; Kübarsepp, J.; Viljus, M. (2007). Pressurized sintering of TiC-base cermets. Proceedings of European Powder Metallurgy Congress EURO PM2007, 1: International Powder Metallurgy Congress & Exhibition EURO PM2007, Toulouse (France), 15-17 October 2007. European Powder Metallurgy Association, 215−220.
3.2.
2007
Klaasen, H.; Kübarsepp, J.; Preis, I.; Sergejev, F.; Traksmaa, R. (2007). Blanking performance and fatigue endurance of carbide composites. Proceedings of 10th International Conference and Exhibition of the European Ceramic Society: 10th International Conference and Exhibition of the European Ceramic Society, June 17 - 21, 2007, Berlin. Ed. Heinrich, J.G.; Aneziris, C.G. Berlin: Deutsche Keramische Gesellschaft e.V, 1241−1244.
1.1.
2006
Klaasen, H.;Kübarsepp, J. (2006). Abrasive wear performance of carbide composites. Wear, 261, 520−526.
1.1.
2006
Klaasen, H.; Kubarsepp, J.; Eigi, R (2006). Peculiarities of hardmetals wear in blanking of sheet metals. Tribology International, 39 (4), 303−309.
1.2.
2006
Klaasen, H.; Kübarsepp, J.; Sergejev, F.; Traksmaa, R. (2006). Performance of cemeneted carbides in cyclic loading conditions. Materials Science, 12 (2), 144−146.
3.1.
2006
Klaasen, H.; Kübarsepp, J.; Kollo, L. (2006). Performance of sinterhipped TiC-base cermets. Proceedings of EURO PM 2006 Congress & Exhibition, Ghent, Belgium, 23-26 Oct. 2006, 1 : EURO PM 2006 Congress & Exhibition, Ghent, Belgium, 23-26 Oct. 2006, EPMA. Shrewsbury, UK : European Powder Metallurgy Association, 213−216. (Hard Materials).
3.1.
2006
Sergejev, F.; Preis, I.; Kübarsepp, J.; Klaasen, H. (2006). Cemented carbides surface fatigue prediction using Murakami approach. Proc. of EURO-PM 2006 Congress & Exhibition, Ghent, Belgium, 23-26 Oct. 2006, Hard Materials 1: EURO-PM 2006 Congress & Exhibition, 23-26 Oct. 2006, Ghent (Belgium). Shrewsbury: European Powder Metallurgy Association, 61−66.
5.1.
2006
Kübarsepp, J.; Klaasen, H.; Sergejev, F. (2006). Performance of cemented carbides in cyclic loading wear conditions. Extended Abstracts of 2006 Powder Metallurgy World Congress, 2: 2006 Powder Metallurgy World Congress, Sept. 24-28, 2006, Busan (Korea). Korean Powder Metallurgy Institute, 887−888.
5.2.
2006
Kübarsepp, J.; Klaasen, H.; Roosaar, T.; Annuka, H. (2006). Abrasive Wear and Mechanical Properties of Carbide Composites. 15th international Baltic conference "Engineering materials & tribology. Baltmattrib-2006" : October 5-6, 2006, Tallinn, Estonia : abstracts: 15th International Baltic Conference Engineering Materials Tribology. Baltmattrib- 2006 October 5- 6, 2006, Tallinn, Estonia. Tallinn: Tallinna Tehnikaülikool, 56−57.
1.1.
2005
Klaasen, Heinrich; Kollo, Lauri; Kübarsepp, Jakob (2005). Performance of tic base cermets sintered by different techniques. Materials Science and Technology, 21 (9), 1049−1053.
3.4.
2005
Sergejev, F.; Preis, I.; Klaasen, H.; Kübarsepp, J. (2005). Murakami approach : fatigue strength prediction of cemented carbides by considering pores to be equivalent to small defects. EURO PM 2005 Proceedings of European Congress and Exhibition on Powder Metallurgy, 1: European Congress and Exhibition on Powder Metallurgy, 2-5 Oct. 2005, Prague (Czech Republic). Shrewsbury, UK: European Powder Metallurgy Association, 335−340.
3.4.
2005
Klaasen, H.; Kübarsepp, J.; Preis, I.; Sergejev, F. (2005). Fatigue performance of carbide composites. EURO PM 2005 Proceedings of European Congress and Exhibition on Powder Metallurgy, 1: European Congress and Exhibition on Powder Metallurgy, 2-5 Oct. 2005, Prague (Czech Republic). Shrewsbury, UK: European Powder Metallurgy Association, 323−328.
3.4.
2005
Klaasen, H.; Kollo, L.; Kübarsepp, J. (2005). Mechanical and wear behaviour of TiC-base cermets sintered by different techniques. EURO PM 2005 Proceedings of European Congress and Exhibition on Powder Metallurgy, 1: European Congress and Exhibition on Powder Metallurgy, 2-5 Oct. 2005, Prague (Czech Republic). Shrewsbury, UK: European Powder Metallurgy Association, 217−222.
5.2.
2005
Sergejev, F.; Preis, I.; Klaasen, H. (2005). Prediction of Fatigue Strength of Cemented Carbides Based on Murakami Approach. Proceedings of the 14th International Baltic Conference Materials Engineering 2005. Kaunas, Lithuania, 2005: 14th International Baltic Conference Materials Engineering 2005. Kaunas, Lithuania, 2005.
1.1.
2004
Klaasen, H.; Kubarsepp, J (2004). Wear of advanced cemented carbides for metalforming tool materials. Wear, 256, 846−853.
1.1.
2004
Klaasen, H.; Kubarsepp, J.; Preis, I. (2004). Wear behaviour, durability, and cyclic strength of TiC -base cermets. Materials Science and Technology, 20 (8), 1006−1010.
1.1.
2004
Klaasen, H.; Kubarsepp, J (2004). Wear behaviour and mechanical properties of sinterhipped hardmetals. Powder Metallurgy, 47 (2), 161−167.
1.2.
2004
Kübarsepp, J.; Klaasen, H.; Vainola, V. (2004). Performance of hard alloys in abrasive-erosive and sliding wear conditions. Proceedings of the Estonian Academy of Sciences. Engineering, 10 (4), 308−314.
3.1.
2004
"Annuka, Harri;Klaasen, Heinrich;Kübarsepp, Jakob;Suvi, Vahur" (2004). Adhesive wear behaviour of carbide composites and tool steels. Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn University of Technology, 175−176.
3.1.
2004
Kübarsepp, J.; Vainola, V.; Klaasen, H.; Loel, R. (2004). Behaviour of hard alloys in sliding and erosion wear conditions. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" (DAAAM) : 29-30th April 2004, Tallinn, Estonia: 4th International Conference "Industrial engineering - new challenges to SME", Tallinn, 29-30th April 2004. Tallinn: Tallinn University of Technology, 203−206.
3.1.
2004
Laansoo, A.; Kübarsepp, J.; Klaasen, H. (2004). Diffusion welding and brazing of tungsten free hardmetals. Proc. of International Conference on Brazing, High Temperature Brazing and Diffusion Welding, June 15-17, 2004, Aachen, Germany: International Conference on Brazing, High Temperature Brazing and Diffusion Welding, Aachen, 2004. ASM International, German Welding Society, 27−30.
3.1.
2004
Klaasen, H.; Kübarsepp, J.; Annuka, H. (2004). Adhesive Wear Behaviour of Hard Alloys. In: Materials of the XIII International Baltic Conference Engineering Materials & Tribology, September 23- 24, Riga, Latvia (114−115).. Riga Technical University.
3.2.
2004
Kübarsepp, J.; Klaasen, H.; Vainola, V. (2004). Sliding and erosion wear of cemented carbides. Proceedings of the 13th International Baltic Conference "Engineering Materials and Tribology": 13th International Baltic Conference Engineering Materials and Tribology BALTMATTRIB2004, Riga, 2004,September 22-24. Riga Technical University, 120−123.
3.2.
2004
Laansoo, A.; Klaasen, H.; Kübarsepp, J.; Surenkov, G. (2004). Difusion bonding of hardmetals. Materials of the13th Baltic Intternational Conference on Engineering Materials and Tribology: BALTMATTRIB2004: Engineerings Materials & Tribology BALTMATTRIB2004, September 23-24, Riga, Latvia. Riga: Riga Technical University, 56−57.
3.2.
2004
Klaasen, H.; Kübarsepp, J.; Kollo, L. (2004). Sintering technology and properties of TiC-base cermets. Proceedings of the 13th International Baltic Conference "Engineering Materials and Tribology": 13th International Baltic Conference Engineering Materials and Tribology BALTMATTRIB2004, Riga, 2004,September 22-24. Riga, Latvia: Riga Technical University, 56−58.
3.4.
2004
Klaasen, H.; Kübarsepp, J.; Preis, I. (2004). Durability in application of TiC-base cermets. Proceedings of World Congress and Exhibition of Powder Metallurgy, PM 2004, 3: World Congress and Exhibition on Powder Metallurgy, PM2004. Shrewsbury, UK: European Powder Metallurgy Association, 617−622.
3.4.
2004
Klaasen, H.; Kübarsepp, J.; Kahar, A. (2004). Mechanical and wear behaviour of compression sintered hardmetals. Proceedings of World Congress and Exhibition of Powder Metallurgy, PM 2004, 3: World Congress and Exhibition on Powder Metallurgy, PM2004,Vienna,Austria,October 17-22. Shrewsbury, UK: European Powder Metallurgy Association, 557−562.
1.2.
2003
Klaasen, H.; Kübarsepp, J.; Preis, I. (2003). Duability of advanced TiC-base cermets. Proceedings of the Estonian Academy of Sciences. Engineering, 9 (4), 272−280.
1.2.
2003
Klaasen, H.; Kübarsepp, J.; Preis, I. (2003). Durability of advanced TiC -base cermets. Proceedings of the Estonian Academy of Sciences. Engineering, 9 (4), 272−280.
3.1.
2003
Klaasen, H.; Kübarsepp, J.; Laansoo, A.; Preis, I. (2003). Dual compounds "cemented carbide+steel" produced by diffusion bonding. Proceedings of European Powder Metallurgy Conference - Challenges of a Changing Market, 1: European Powder Metallurgy Conference - Challenges of a Changing Market, October 20-22, 2003, Valencia (Spain). Shrewsbury, UK: European Powder Metallurgy Association, 155−159.
3.1.
2003
Kommel, L.; Kübarsepp, J.; Klaasen, H. (2003). Boron carbide based composites microstructure and properties relationships to processing features. Proceedings of European Powder Metallurgy Conference - Challenges of a Changing Market, 2: European Powder Metallurgy Conference - Challenges of a Changing Market, October 20-22, 2003, Valencia (Spain). Shrewsbury, UK: European Powder Metallurgy Association, 87−92.
3.1.
2002
Klaasen, H.; Kübarsepp, J.; Preis, I. (2002). Toughness characteristics of carbide composites. Proceedings of the 3rd International Conference "Industrial Engineering-New Challenges to SME": 3rd International Conference of the DAAAM "Industrial Engineering-New Challenges to SME", April 25-27 2002, Tallinn (Estonia). Tallinn: Tallinn University of Technology Press, 154−156.
3.1.
2002
"Laansoo, Andres;Kübarsepp, Jakob;Klaasen, Heinrich;Sur˛enkov, Gennadi" (2002). Joining hardmetals to steel using brazing processes. Proceedings of the 3rd International Conference Industrial Engineering-New Challenges to SME: 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn TU, 177−180.
3.1.
2002
"Kübarsepp, Jakob;Klaasen, Heinrich;Laansoo, Andres" (2002). TiC-base cermet steel dual compounds produced by diffusion bonding. Proceedings of the 3rd International Conference Industrial Engineering-New Challenges to SME: 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn TU, 173−176.
3.1.
2002
Klaasen, H.; Kübarsepp, J.; Preis, I. (2002). Toughness and durability of cemented carbides. Proceedings of the International Conference on Deformation and Fracture in Structural PM Materials: DF PM 2002, September 15-18, 2002, Stara Lesna, Slovak Republik, 1: International Conference on Deformation and Fracture in Structural PM Materials, Stara Lesna, 2002. Košice: IMR SAS, 77−83.
3.1.
2002
Klaasen, H.; Kübarsepp, J. (2002). Strength and wear resistance of sinterhipped hardmetals. Proceedings of European Conference on Hard Materials and Diamond Tooling: EURO PM 2002, October 7-9, 2002, Lausanne, Switzerland: European Conference on Hard Materials and Diamond Tooling, Lausanne, 2002. European Powder Metallurgy Association, 234−239.
3.1.
2002
Klaasen, H.; Kübarsepp, J.; Preis, I. (2002). Toughness of carbide composites and their durability in application. Proceedings of European Conference on Hard Materials and Diamond Tooling : EURO PM 2002: European Conference on Hard Materials and Diamond Tooling, October 7-9, 2002, Lausanne (Switzerland). Shrewsbury, UK: European Powder Metallurgy Association, 240−245.
3.2.
2002
"Sur˛enkov, Gennadi;Laansoo, Andres;Kübarsepp, Jakob" (2002). Brazing and diffusion welding of tungsten free hardmetals. Abstracts of International Conference on Welding-Quality-Competitiveness: International Conference on Welding - Quality - Competitiveness,Moscow, Russia,October 22-24,2002. Moscow, 61−63.
1.1.
2001
Kubarsepp, J.; Klaasen, H.; Pirso, J (2001). Behaviour of tic-base cermets in different wear conditions. Wear, 249 (3-4), 229−234. DOI: 10.1016/S0043-1648(01)00569-5.
1.2.
2001
Klaasen, Heinrich; Kübarsepp, Jakob (2001). Properties of hardmetals influencing their adhesive wear in sheet metal blanking. Tribologia, 20 (1), 23−30.
3.1.
2001
Klaasen, H.; Kübarsepp, J. (2001). Reliability characteristics of sinterhipped hardmetals. Materials Engineering and BALTTRIB - 2001 : materials of the X-th International Baltic Conference, September 27 - 28, Jurmala, Latvia: 10th International Baltic Conference on Materials Engineering, Jurmala, September 27-28,2001. Riga Technical University, 55−57.
3.1.
2001
Laansoo, A.; Klaasen, H.; Kübarsepp, J.; Surženkov, G. (2001). Diffusion bonding hardmetals with steels. Materials engineering and BALTTRIB 2001 : materials of the X-th International Baltic Conference, September 27 - 28, Jurmala, Latvia: 10th International Baltic Conference on Materials Engineering, Jurmala, 2001. Riga Technical University, 58−61.
3.1.
2001
Kübarsepp, J.; Klaasen, H.; Laansoo, A. (2001). Compound carbide composites produced by diffusion bonding. Proceedings of European Congress and Exhibition on Powder Metallurgy PM 2001: European Congress and Exhibition on Powder Metallurgy PM2001, Nice,France,October 22-24, 2001. European Powder Metallurgy Association, 158−163.
3.1.
2001
Klaasen, H.; Kübarsepp, J. (2001). Durability characteristics of compression-sintered hardmetals. Proceedings of European Congress and Exhibition on Powder Metallurgy PM 2001: European Congress and Exhibition on Powder Metallurgy, October 22-24 2001, Nice (France). Shrewsbury, UK: European Powder Metallurgy Association, 153−157.
3.1.
2001
Kübarsepp, J.; Pirso, J.; Klaasen, H. (2001). Tribological characterization of TiC-base cermets. In: Proceedings of 2000 Powder Metallurgy World Congress : November 12-16, 2000, Kyoto, Japan (1633−1636). The Japan Society of Powder and Powder Metallurgy.
3.4.
2001
Kübarsepp, J.; Klaasen, H.; Pirso, J. (2001). Wear characteristics of TiC-base cermets. Materials of 10th International Baltic Conference "Materials Engineering & Balttrib 2001": 10th International Baltic Conference "Materials Engineering & Balttrib 2001", Jurmala, Latvia, September 27-28. Riga Technical University, 207−211.
3.1.
2000
Kübarsepp, J.; Klaasen, H.; Pirso, J.. (2000). TIC-base cermets as wear resistant materials. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 1: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. Ed. Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo : Technical Research Centre of Finland, 206−215. (VTT Symposia; 200).
3.1.
2000
Kübarsepp, J.; Laansoo, A.; Klaasen, H. (2000). Diffusion bonding of steels with ceramic and metal composites. Proceedings of the 2nd International DAAAM Conference: 2nd International Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia. Tallinn: Tallinn University of Technology Press, 171−174.
3.1.
2000
Klaasen, H.; Kübarsepp, J. (2000). Properties of hardmetals influencing their adhesive wear. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 3: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. Ed. Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo: Technical Research Centre of Finland, 877−885. (VTT SYMPOSIA ).
1.2.
1999
Reshetnyak, H.; Kübarsepp, J. (1999). Wear resistance and toughness of hardmetals. Med˛iagotyra = Materials science, 2, 69−71.
3.1.
1999
Kübarsepp, J.; Reshetnyak, H. (1999). Wear resistance of hardmetals and cermets in conditions with prevailation of adhesion. Advances in Powder Metallurgy & Particulate Materials 1999: International conference "Powder Metallurgy & Particulate Materials 1999", Vancuover, Canada, June, 1999. Princeton, USA: Metal Powder Industry Publications, 179−188. (Part 10: Cemented Carbides).
3.4.
1999
Kübarsepp, J.; Reshetnyak, H.; Annuka, H. (1999). Wear resistance assessment of cermets and hardmetals. International Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania : proceedings. Kaunas: Lithuanian University of agriculture, 76−84.
5.2.
1999
Kübarsepp, J.; Pirso, J.; Reshetnyak, H. (1999). Characteristics and Application of Tungsten-Free Cermets. Proc. of Joint Nordic Conf. in Powder Technology: Joint Nordic Conference on Powder Technology,May 5-6, 1999, Oslo Norway. Norwegian University of Science and Technology, 19.
1.1.
1998
Reshetnyak, H.; Kubarsepp, J. (1998). Resistance of hardmetals to fracture. Powder Metallurgy, 41 (3), 211−216.
3.4.
1998
Reshetnyak, H., Kübarsepp, J. (1998). Reliability characteristics of hardmetals. Proceedings of the World Congress and Exhibition on Powder Metallurgy, 1998: World Congress and Exhibition on Powder Metallurgy, Granada, Spain, October 18-22, 1998. Shrewsbury, UK: European Powder Metallurgy Association, 15−20.
3.4.
1998
Reshetnyak, H.; Kübarsepp, J. (1998). Features of hardmetals wear resistance. NORDTRIB '98 : proceedings of the 8th International Conference on Tribology, Ebeltoft, Denmark, 7-10 June 1998, 1: 8th International Symposium on Tribology NORDTRIB 1998, Ebeltoft, Denmark, June 7-10 ,1998. Arhus: DTI Tribology Centre, 239−246.
1.1.
1997
Reshetnyak, H.; Kubarsepp, J. (1997). Structure sensitivity of wear resistance of hardmetals. International Journal of Refractory Metals & Hard Materials, 15, 89−98.
1.1.
1994
Reshetnjak, H.; Kübarsepp, J. (1994). Mechanical properties of hard metals and their erosive wear resistance. Wear, 177 (2), 185−193. DOI: 10.1016/0043-1648(94)90244-5.
1.1.
1994
Kubarsepp, J.; Reshetnyak, H.; Annuka, H. (1994). Characterization of the serviceability of steel-bonded hardmetals. International Journal of Refractory Metals & Hard Materials, 12 (6), 341−348.
25.04.2019

Heinrich Klaasen

https://www.etis.ee/CV/Heinrich_Klaasen/eng
15.02.1929
6203359
53465638
heinrich.klaasen@cv.eris.ee

Career

Institutions and positions
2000-k.a. TUT, Senior Reseacher
1999–2005   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Senior Researcher (0,75)
01.01.1994–31.12.1999   
1994-1999 AMP Eesti Ltd., Head of Department
01.01.1989–31.12.1994   
1989-1991 SHTAMP Ltd., Chief Officer
01.01.1959–31.12.1988   
1959-1988 Institute of Science, Research and Design of Electrotechnics, Senior Reseacher, Laboratory Manager
01.01.1954–31.12.1958   
1954-1958 Polytechnical Institute of Ural, PRD Student, Senior Engineer
 
 
Education
1954–1958   
Polytechnical Institute of Ural, Phd studies
1949–1953   
Tallinn Technical University, Mechanical Engineering, 1953
 
 
R&D related managerial and administrative work
Estonian Association of Mechanical Engineering(member of the board)
Estonian Society of Materials Engineering(member of the board)

Qualifications

Academic degrees
Heinrich Klaasen, Doctor's Degree, 1996, (sup) , Kõvasulamite töökindlus metallide survega töötlemisel (Hardmetals durability in metal forming operations), Tallinn University of Technology Faculty of Mechanical Engineering.
 
 
Honours & awards
1998, Heinrich Klaasen, Estonian Registered Engineer
1980, Heinrich Klaasen, golden medal of Soviet Union's economy development exhibition
1976, Heinrich Klaasen, bronze medal ofSoviet union's economy development exhibition
 
 

Supervised dissertations

Publications

Category
Year
Publication
 
3.1.
2008
Roosaar, T.; J.Kübarsepp, J.; Klaasen, H.; Viljus, M. (2008). Adhesion wear performance of carbide-base composites. Proceedings of the 13th Nordic Symposium in Tribology, Nordtrib 2008, Tampere, Finland: 13th Nordic Symposium in Tribology, Nordtrib 2008, June 10-13, 2008, Tampere, Finland. Ed. Kleemola, J.; Lehtovaara, A. Tampere University of Technology, 10 pp.
1.1.
2007
Klaasen, H.; Kollo, L.; Kübarsepp, J. (2007). Mechanical properties and wear performance of compression sintered TiC-base cermets. Powder Metallurgy, 50 (2), 132−136.
1.1.
2007
Klaasen, H.; Kübarsepp, J. (2007). Performance of carbide composites for cyclic loading applications. International Journal of Materials & Product Technology, 28, 399−424. DOI: 10.1504/IJMPT.2007.013087.
3.1.
2007
Kübarsepp, J.; Klaasen, H.; Sergejev, F. (2007). Performance of cemented carbides in cyclic loading wear conditions. In: Progress in Powder Metallurgy (1221−1224).. Trans Tech Publications Ltd. (Materials Science Forum ; 534-536).
1.1.
2006
Klaasen, H.;Kübarsepp, J. (2006). Abrasive wear performance of carbide composites. Wear, 261, 520−526.
1.1.
2006
Klaasen, H.; Kubarsepp, J.; Eigi, R (2006). Peculiarities of hardmetals wear in blanking of sheet metals. Tribology International, 39 (4), 303−309.
1.1.
2005
Klaasen, Heinrich; Kollo, Lauri; Kübarsepp, Jakob (2005). Performance of tic base cermets sintered by different techniques. Materials Science and Technology, 21 (9), 1049−1053.
1.1.
2004
Klaasen, H.; Kubarsepp, J (2004). Wear of advanced cemented carbides for metalforming tool materials. Wear, 256, 846−853.
1.1.
2004
Klaasen, H.; Kubarsepp, J.; Preis, I. (2004). Wear behaviour, durability, and cyclic strength of TiC -base cermets. Materials Science and Technology, 20 (8), 1006−1010.
1.1.
2004
Klaasen, H.; Kubarsepp, J (2004). Wear behaviour and mechanical properties of sinterhipped hardmetals. Powder Metallurgy, 47 (2), 161−167.
25.04.2019

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 7 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
ETFETF5882Komplitseeritud töötingimustes töötavate karbiidkermiste tehnoloogia01.01.200431.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond43 094,49 EUR
SFSF0142505s03Kulumiskindlad materjalid ja kulumine01.01.200331.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond668 100,42 EUR
MUU349FKõrgkvaliteetsete materjalide kuumisostaatpressimise tehnoloogia01.06.200331.12.2004Jakob KübarseppTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool143 034,27 EUR
MUUG4850 (ETF4850)Kõvasulamite töökindluskarakteristikud01.01.200131.12.2003Jakob KübarseppTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool24 222,51 EUR
SFSF0140062s08Mitmefaasiliste tribomaterjalide arendamine ja tehnoloogia01.01.200831.12.2013Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond1 259 299,69 EUR
ETFETF7889Tehnomaterjalide ja aurustussadestatud kõvapinnete väsimusmehaanika uurimine01.01.200931.12.2012Fjodor SergejevTallinna Tehnikaülikool, Mehaanikateaduskond59 080,21 EUR
MUUT234 (0140234s98)Tribomaterjalid ja-süsteemid01.01.199831.12.2002Jakob KübarseppTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool417 151,33 EUR