See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Indrek Abiline

https://www.etis.ee/CV/Indrek_Abiline/est
18.01.1961
+372 654 5181
+372 5016725
indrek@prenar.ee

Teenistuskäik

Töökohad ja ametid
01.01.1995–...   
PRENAR OÜ, juhataja
2009–31.12.2010   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Kvaliteeditehnika ja metroloogia õppetool, Teadur (0,50)
1999–2003   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Kvaliteeditehnika ja metroloogia õppetool, Assistent (1,00)
01.01.1991–31.12.1995   
AS "Viro Tools", müügijuht
01.01.1987–31.12.1991   
vabrik "Salvo", tehnoloogiainsener
01.01.1985–31.12.1987   
PI "EKE Projekt", insener
 
 
Haridustee
2004–2004   
täiendõpe metroloogias, Soome mõõtetehnika keskus (MIKES)
2002–2008   
Tallinna Tehnikaülikool (TTÜ), doktoriõpe
1997–1999   
Tallinna Tehnikaülikool (TTÜ), magistriõpe
1979–1984   
Tallinna Tehnikaülikool (TTÜ)

Kvalifikatsioon

Teaduskraadid
Indrek Abiline, doktorikraad, 2008, (juh) Rein Laaneots, Calibration Methods of Coating Thickness Gauges (Pindepaksuse mõõtevahendite kalibreerimismeetodite uurimine), Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut.
Indrek Abiline, magistrikraad (teaduskraad), 1999, (juh) Rein Laaneots, Keermekaliibrite kalibreerimine, Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Kvaliteeditehnika ja metroloogia õppetool, Metroloogia ja mõõtetehnika õppetool.
 
 
Teaduspreemiad ja tunnustused
2004, Indrek Abiline, Jaan Poska nimeline stipendium
1998, Indrek Abiline, Rotalia Fondi stipendium
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.13. Mehhanotehnika, automaatika, tööstustehnoloogia; TÄPSUSTUS: Mõõtevahendite täpsuskarakteristikute uurimine sõltuvalt mõjuritest ja mõõtevahendite kalibreerimine

Publikatsioonid

Klass
Aasta
Publikatsioon
 
3.1.
2010
Põlder, A.; Abiline, I.; Tamre, M. (2010). Automatic Visual Code Quality Evaluation for Wood Industry. Proc. of the 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 554−559.
2.3.
2008
Abiline, Indrek; juhendaja Laaneots, Rein (2008). Calibration Methods of Coating Thickness Gauges. Tallinn: TUT Press.
3.1.
2008
Riim, J.; Laaneots, R.; Leibak, A.; Abiline, I. (2008). The coating thickness and its definitions. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (13−18). . Tallinn: Tallinn University of Technology.
1.3.
2007
Abiline, Indrek; Laaneots, Rein; Nanits, Maidu; Riim, Jürgen (2007). On the uncertainty of measurements by measuring the form of a surface. Proceedings of the Estonian Academy of Sciences. Engineering, 84−93.
3.1.
2006
Abiline, Indrek; Laaneots, Rein; Nanits, Mats-Maidu; Riim, Jürgen (2006). Measurement uncertainty of surface contour with complicated form. Proceedings of the 5th International Conference of DAAAM Baltic Industrial Engineering - Adding Innovation Capacity of Labour Force and Entrepreneur. _EditorsAbbr R.Kyttner. Tallinn : DAAAM Baltic, Tallinn University of Technology: DAAAM International Vienna, 101−105.
3.4.
2005
Abiline, Indrek; Laaneots, Rein; Nanits, Maidu (2005). Research results of the coating thickness standards. Proceedings OST-05 Symposium on Machine Design. Stockholm: KTH - the Royal Institute of Technology, 5.
3.1.
2004
Abiline, Indrek; Laaneots, Rein; Nanits, Mats-Maidu (2004). Calibration of thickness gauges. Proceedings 10th IMEKO TC7 International Symposium on Advances of Measurement Science, 2. _EditorsAbbr Sergey V.Muravyov. Saint-Petersburg: IMEKO, 372−375.
3.4.
2004
Abiline, Indrek; Laaneots, Rein; Nanits, Maidu (2004). Calibration of coating thickness gauges. Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME. Ed. J.Papstel/B.Katalinic. Tallinn: DAAAM Estonia, Tallinn University of Technology: DAAAM International Vienna, 117−119.
3.4.
2003
Abiline, Indrek; Laaneots, Rein; Nanits, Mats-Maidu (2003). The calibration method of coating thickness gauges. OST-03 Symposium on Machine Design. Ed. J.Karhunen. Oulu: Oulun Yliopisto Konetekniikan Osasto, 169−176.
3.4.
2000
Abiline, Indrek; Laaneots, Rein (2000). Magnetic Measuring Method of Coating Thickness. International DAAAM Proceedings of the 2nd International Conference. Ed. J.Papstel/B.Katalinic. Tallinn, DAAAM National Tallinn, Tallinn TU: DAAAM International Vienna, 19−22.
3.5.
1998
Abiline, Indrek; Laaneots, Rein (1998). Calibration of thread limit plug gauges. Proceedings of the Third National DAAAM Conference in Estonia. Science’ 98. Tallinn: Tallinn Technical University, 30−32.

Tööstusomand

28.01.2021

Indrek Abiline

https://www.etis.ee/CV/Indrek_Abiline/eng
18.01.1961
+372 654 5181
+372 5016725
indrek@prenar.ee

Career

Institutions and positions
01.01.1995–...   
PRENAR LLC, manager
2009–31.12.2010   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Mechatronics , Chair of Quality Engineering and Metrology, Researcher (0,50)
1999–2003   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Mechatronics , Chair of Quality Engineering and Metrology, Assistant (1,00)
01.01.1991–31.12.1995   
Viro Tools Ltd., sales manager
01.01.1987–31.12.1991   
factory "Salvo", technology engineer
01.01.1985–31.12.1987   
PI "EKE Projekt", engineer
 
 
Education
2004–2004   
special courses in metrology, Finnish centre for metrology and accreditation (MIKES)
2002–2008   
Tallinn University of Technology (TUT), PhD studies
1997–1999   
Tallinn University of Technology (TUT), master studies
1979–1984   
Tallinn University of Technology (TUT)

Qualifications

Academic degrees
Indrek Abiline, Doctor's Degree, 2008, (sup) Rein Laaneots, Calibration Methods of Coating Thickness Gauges, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Mechatronics.
Indrek Abiline, Research Master's Degree, 1999, (sup) Rein Laaneots, Keermekaliibrite kalibreerimine (Calibration of thread limit gauges), Tallinn University of Technology Faculty of Mechanical Engineering, Department of Mechatronics Chair of Quality Engineering and Metrology, Chair of Metrology and Measurements.
 
 
Honours & awards
2004, Indrek Abiline, Jaan Poska Scholarship
1998, Indrek Abiline, Rotalia Foundation Scholarship
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.13. Mechanical Engineering, Automation Technology and Manufacturing Technology; SPECIFICATION: Research of accuracy characteristics of the measuring instruments depending from different factors and the calibration of measuring instruments

Publications

Category
Year
Publication
 
3.1.
2010
Põlder, A.; Abiline, I.; Tamre, M. (2010). Automatic Visual Code Quality Evaluation for Wood Industry. Proc. of the 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 554−559.
2.3.
2008
Abiline, Indrek; juhendaja Laaneots, Rein (2008). Calibration Methods of Coating Thickness Gauges. Tallinn: TUT Press.
3.1.
2008
Riim, J.; Laaneots, R.; Leibak, A.; Abiline, I. (2008). The coating thickness and its definitions. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (13−18). . Tallinn: Tallinn University of Technology.
1.3.
2007
Abiline, Indrek; Laaneots, Rein; Nanits, Maidu; Riim, Jürgen (2007). On the uncertainty of measurements by measuring the form of a surface. Proceedings of the Estonian Academy of Sciences. Engineering, 84−93.
3.1.
2006
Abiline, Indrek; Laaneots, Rein; Nanits, Mats-Maidu; Riim, Jürgen (2006). Measurement uncertainty of surface contour with complicated form. Proceedings of the 5th International Conference of DAAAM Baltic Industrial Engineering - Adding Innovation Capacity of Labour Force and Entrepreneur. _EditorsAbbr R.Kyttner. Tallinn : DAAAM Baltic, Tallinn University of Technology: DAAAM International Vienna, 101−105.
3.4.
2005
Abiline, Indrek; Laaneots, Rein; Nanits, Maidu (2005). Research results of the coating thickness standards. Proceedings OST-05 Symposium on Machine Design. Stockholm: KTH - the Royal Institute of Technology, 5.
3.1.
2004
Abiline, Indrek; Laaneots, Rein; Nanits, Mats-Maidu (2004). Calibration of thickness gauges. Proceedings 10th IMEKO TC7 International Symposium on Advances of Measurement Science, 2. _EditorsAbbr Sergey V.Muravyov. Saint-Petersburg: IMEKO, 372−375.
3.4.
2004
Abiline, Indrek; Laaneots, Rein; Nanits, Maidu (2004). Calibration of coating thickness gauges. Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME. Ed. J.Papstel/B.Katalinic. Tallinn: DAAAM Estonia, Tallinn University of Technology: DAAAM International Vienna, 117−119.
3.4.
2003
Abiline, Indrek; Laaneots, Rein; Nanits, Mats-Maidu (2003). The calibration method of coating thickness gauges. OST-03 Symposium on Machine Design. Ed. J.Karhunen. Oulu: Oulun Yliopisto Konetekniikan Osasto, 169−176.
3.4.
2000
Abiline, Indrek; Laaneots, Rein (2000). Magnetic Measuring Method of Coating Thickness. International DAAAM Proceedings of the 2nd International Conference. Ed. J.Papstel/B.Katalinic. Tallinn, DAAAM National Tallinn, Tallinn TU: DAAAM International Vienna, 19−22.
3.5.
1998
Abiline, Indrek; Laaneots, Rein (1998). Calibration of thread limit plug gauges. Proceedings of the Third National DAAAM Conference in Estonia. Science’ 98. Tallinn: Tallinn Technical University, 30−32.

Industrial property

28.01.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 5 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
MUUT233 (0140233s98)Integreeritud mõõte- ja kvaliteedisüsteemid01.01.199831.12.2002Rein LaaneotsTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Kvaliteeditehnika ja metroloogia õppetool81 487,35 EUR
SFSF0142506s03MEHHATROONIKA- JA MÕÕTESÜSTEEMIDE SÜNTEES: MODELLEERIMINE, OPTIMEERIMINE JA KVALITEEDIOHJE01.01.200331.12.2007Mart TamreTallinna Tehnikaülikool, Mehaanikateaduskond113 769,12 EUR
SFSF0140113Bs08Mehhatroonika- ja tootmissüsteemide proaktiivsus ja käitumismudelid01.01.200831.12.2013Mart TamreTallinna Tehnikaülikool, Mehaanikateaduskond413 065,99 EUR
ETFETF7475Pinna geomeetriat iseloomustavate suuruste mõõtemeetodid, mõõtekompleksi arendus ja mõõtmiste jälgitavus01.01.200831.12.2011Rein LaaneotsTallinna Tehnikaülikool, Mehaanikateaduskond35 521,01 EUR
ETFETF6172Pinna oluliste parameetrite mõõtmine ja määramatus01.01.200531.12.2007Rein LaaneotsTallinna Tehnikaülikool, Mehaanikateaduskond20 572,04 EUR