See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Inga Põldsalu

https://www.etis.ee/CV/Inga_Põldsalu/est
inga.poldsalu@ut.ee

Teenistuskäik

Töökohad ja ametid
01.01.2015–30.06.2015   
Tartu Ülikool, Loodus- ja tehnoloogiateaduskond, Tartu Ülikooli Tehnoloogiainstituut, materjalitehnoloogia spetsialist (0,80)
01.04.2014–31.12.2014   
Tartu Ülikool, Loodus- ja tehnoloogiateaduskond, Tartu Ülikooli Tehnoloogiainstituut, materjalitehnoloogia spetsialist (0,95)
01.09.2012–31.03.2014   
Tartu Ülikool, Loodus- ja tehnoloogiateaduskond, Tartu Ülikooli Tehnoloogiainstituut, materjalitehnoloogia spetsialist (1,00)
 
 
Haridustee
2012–30.11.2018   
Tartu Ülikool, tehnika ja tehnoloogia, doktorant
2010–2012   
Tartu Ülikool, materjaliteadus, magistrikraad
2007–2010   
Tartu Ülikool, materjaliteadus, bakalaureusekraad

Kvalifikatsioon

Teaduskraadid
Inga Põldsalu, doktorikraad, 2018, (juh) Anna-Liisa Peikolainen; Rudolf Kiefer, Soft actuators with ink-jet printed electrodes (Tindiprinditud pehmed aktuaatorid), Tartu Ülikool, Loodus- ja täppisteaduste valdkond, tehnoloogiainstituut.
Inga Põldsalu, magistrikraad, 2012, (juh) Uno Mäeorg; Urmas Johanson; Irep Gözen, An AFM study of reactive sputter-deposited oxide films used as solid support for lipid nanotubes networks (Lipiidsete nanotoruvõrgustike uurimiseks kasutatavate reaktiivse magnetrontolmustamise abil sadestatud oksiidsete kilede iseloomustamine AFM-i abil), Tartu Ülikool, Loodus- ja tehnoloogiateaduskond.
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS KLASSIFIKAATOR: T152 Komposiitmaterjalid

Lõppenud projektid

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
Põldsalu, Inga; Rohtlaid, Kätlin; Plesse, Cedric; Vidal, Frédéric; Nguyen, Ngoc Tuan; Peikolainen, Anna-Liisa; Tamm, Tarmo; Kiefer, Rudolf (2020). Printed PEDOT:PSS Trilayer: Mechanism Evaluation and Application in Energy Storage. Materials, 13 (2), 491. DOI: 10.3390/ma13020491.
1.1.
2020
Rinne, Pille; Põldsalu, Inga; Ratas, Herman Klas; Kruusamäe, Karl; Johanson, Urmas; Tamm, Tarmo; Põhako-Esko, Kaija; Punning, Andres; Peikolainen, Anna-Liisa; Kaasik, Friedrich; Must, Indrek; van den Ende, Daan; Aabloo, Alvo (2020). Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators. Journal of Visualized Experiments, 158, e61216. DOI: 10.3791/61216.
1.1.
2019
Rinne, Pille; Põldsalu, Inga; Johanson, Urmas; Tamm, Tarmo; Põhako-Esko, Kaija; Punning, Andres; van den Ende, Daan; Aabloo, Alvo (2019). Encapsulation of ionic electromechanically active polymer actuators. Smart Materials and Structures, 28 (7). DOI: 10.1088/1361-665X/ab18c0.
1.1.
2018
Põldsalu, Inga; Rohtlaid, Kätlin; Nguyen, Tran Minh Giao; Plesse, Cedric; Vidal, Frédéric; Khorram, Mahdi Safaei; Peikolainen, Anna-Liisa; Tamm, Tarmo; Kiefer, Rudolf (2018). Thin ink-jet printed trilayer actuators composed of PEDOT:PSS on interpenetrating polymer networks. Sensors and Actuators B-Chemical, 258, 1072−1079. DOI: 10.1016/j.snb.2017.11.147.
1.1.
2018
Nakshatharan, S. Sunjai; Vunder, Veiko; Põldsalu, Inga; Johanson, Urmas; Punning, Andres; Aabloo, Alvo (2018). Modelling and Control of Ionic Electroactive Polymer Actuators under Varying Humidity Conditions. Actuators, 7 (1). DOI: 10.3390/act7010007.
1.1.
2018
Põldsalu, Inga; Johanson, Urmas; Tamm, Tarmo; Punning, Andres; Greco, Francesco; Peikolainen, Anna-Liisa; Kiefer, Rudolf; Aabloo, Alvo (2018). Mechanical and electro-mechanical properties of EAP actuators with inkjet printed electrodes. Synthetic Metals, 246, 122−127. DOI: 10.1016/j.synthmet.2018.10.009.
2.3.
2018
Põldsalu, Inga (2018). Soft actuators with ink-jet printed electrodes. (Doktoritöö, Tartu Ülikool). University of Tartu Press.
1.1.
2017
Friedrich Kaasik, Indrek Must, Inna Baranova, Inga Põldsalu, Enn Lust, Urmas Johanson, Andres Punning, and Alvo Aabloo (2017). Scalable fabrication of ionic and capacitive laminate actuators for soft robotics. Sensors and Actuators B-Chemical, 246, 154−163. DOI: 10.1016/j.snb.2017.02.065.
1.1.
2017
Põldsalu, Inga; Harjo, Madis; Peikolainen, Anna-Liisa; Tamm, Tarmo; Uibu, Mai; Kiefer, Rudolf (2017). Inkjet‐printed hybrid conducting polymer-activated carbon aerogel linear actuators driven in an organic electrolyte. Sensors and Actuators B-Chemical, 250, 44−51. DOI: 10.1016/j.snb.2017.04.138.
6.8.
2017
Peikolainen, Anna-Liisa; Põhako-Esko, Kaija; Põldsalu, Inga (2017). Tartu teadlased valmistasid koos prantslastega imeõhukese, kuid võimeka tehislihase. http://forte.delfi.ee. 15.12.2017.
1.1.
2015
Must, Indrek; Kaasik, Friedrich; Põldsalu, Inga; Mihkels, Lauri; Johanson, Urmas; Punning, Andres; Aabloo, Alvo (2015). Ionic and Capacitive Artificial Muscle for Biomimetic Soft Robotics. Advanced Engineering Materials, 17 (1), 84−94. DOI: 10.1002/adem.201400246.
3.1.
2015
Põldsalu, Inga; Mändmaa, Sven-Erik; Peikolainen, Anna-Liisa; Kesküla, Arko; Aabloo, Alvo (2015). Fabrication of ion-conducting carbon-polymer composite electrodes by spin-coating. 9430: Electroactive Polymer Actuators and Devices (EAPAD) 2015, San Diego, USA. Published in SPIE Proceedings Vol. 9430, 94301Q. DOI: 10.1117/12.2084180.
3.1.
2015
Punning, A.; Põldsalu, I.; Kaasik, F.; Vunder, V.; Aabloo, A. (2015). Micro-mechanics of ionic electroactive polymer actuators. Proceedings of SPIE - The International Society for Optical Engineering, 9430. SPIE, 94301K. DOI: 10.1117/12.2084202.
3.1.
2015
Punning, A.; Must, I.; Põldsalu, I.; Vunder, V.; Kaasik, F.; Temmer, R.; Aabloo, A. (2015). Long-term degradation of the ionic electroactive polymer actuators. Proceedings of SPIE - The International Society for Optical Engineering, 9430. SPIE, 94300S. DOI: 10.1117/12.2084201.
1.1.
2014
Punning, A.; Kim, K.; Palmre, V.; Vidal, F.; Plesse, C.; Festin, N.; Maziz, A.; Askaka, K.; Sugino, T.; Alici, G.; Spinks, G.; Wallace, G.; Must, I.; Põldsalu, I.; Vunder, V.; Temmer, R.; Kruusamäe, K.; Torop, J.; Kaasik, F.; Rinne, P. ... Aabloo, A. (2014). Ionic electroactive polymer artificial muscles in space applications. Scientific Reports, 4 (6913), 1−6.
1.1.
2014
Must, Indrek; Vunder, Veiko; Kaasik, Friedrich; Põldsalu, Inga; Johanson, Urmas; Punning, Andres; Aabloo, Alvo. (2014). Ionic liquid-based actuators working in air: The effect of ambient humidity. Sensors and Actuators B-Chemical, 202, 114−122. DOI: 10.1016/j.snb.2014.05.074.
1.1.
2014
Vunder, V.; Itik, M.; Põldsalu, I.; Punning, A.; Aabloo, A. (2014). Inversion-based control of ionic polymer-metal composite actuators with nanoporous carbon-based electrodes. Smart Materials and Structures, 23 (2), ARTN 025010. DOI: 10.1088/0964-1726/23/2/025010.
1.1.
2014
Punning, Andres; Must, Indrek; Poldsalu, Inga; Vunder, Veiko; Temmer, Rauno; Kruusamaee, Karl; Kaasik, Friedrich; Torop, Janno; Rinne, Pille; Lulla, Tonis; Johanson, Urmas; Tamm, Tarmo; Aabloo, Alvo (2014). Lifetime measurements of ionic electroactive polymer actuators. Journal of Intelligent Material Systems and Structures, 25 (18), 2267−2275. DOI: 10.1177/1045389X14546656.
3.1.
2014
Must, Indrek; Kaasik, Friedrich; Põldsalu, Inga; Mihkels, Lauri; Johanson, Urmas; Punning, Andres; Aabloo, Alvo (2014). Pulse-Width-Modulated Charging of Ionic and Capacitive Actuators. In: Advanced Intelligent Mechatronics (AIM), 2014 IEEE/ASME International Conference on (1446−1451). . IEEE. DOI: 10.1109/AIM.2014.6878286.
5.2.
2014
Põldsalu, Inga; Peikolainen, Anna-Liisa; Kaasik, Friedrich; Vunder, Veiko; Must, Indrek; Greco, Francesco; Aabloo, Alvo (2014). Inkjet printed PEDOT:PSS-carbon aerogel actuators. In: EuroEAP 2014 Fourth international conference on Electromechanically Active Polymer (EAP) transducers & artificial muscles. Euro EAP, Linköping, Sweden, 10/06/2014 - 11/06/2014.
1.1.
2013
Must, Indrek; Anton, Mart; Viidalepp, Erki; Põldsalu, Inga; Punning, Andres; Aabloo, Alvo (2013). Mechanoelectrical impedance of a carbide-derived carbon-based laminate motion sensor at large bending deflections. Smart Materials & Structures, 22 (10), nr 104015. DOI: 10.1088/0964-1726/22/10/104015.
1.1.
2013
Gozen, Irep; Shaali, Mehrnaz; Ainla, Alar; Ortmen, Bahanur; Põldsalu, Inga; Kustanovich, Kiryl; David, Gavin; Jeffries, Michael; Konkoli, Zoran; Dommersnes, Paul; Jesorka, Aldo (2013). Thermal Migration of Molecular Lipid Films as Contactless Fabrication Strategy for Lipid Nanotube Networks. Lab on a Chip, 13 (19), 3822−3826.10.1039/C3LC50391G.
1.1.
2013
Must, Indrek; Johanson, Urmas; Kaasik, Friedrich; Põldsalu, Inga; Punning, Andres; Aabloo, Alvo (2013). Charging a supercapacitor-like laminate with ambient moisture: from a humidity sensor to an energy harvester. Physical Chemistry Chemical Physics, 15 (24), 9605−9614. DOI: 10.1039/c3cp51526e.
1.1.
2013
Gözen, Irep; Ortmen, Bahanur; Põldsalu, Inga; Dommersnes, Paul; Orwar, Owe; Jesorka, Aldo (2013). Repair of large area pores in supported double bilayers. Soft Matter, 9 (10), 2787−2792.10.1039/c3sm27429b.
3.1.
2013
Must, Indrek; Johanson, Urmas; Kaasik, Friedrich; Põldsalu, Inga; Punning, Andres; Aabloo, Alvo (2013). An ionic liquid-based actuator as a humidity sensor. 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM); Wollongong, Australia; 9-12 July 2013. , 1498−1503. DOI: 10.1109/AIM.2013.6584307.
5.2.
2013
Must, Indrek; Põldsalu, Inga; Kaasik, Friedrich; Johanson, Urmas; Punning, Andres; Aabloo, Alvo (2013). The performance of the ionic liquid‐containing electroactive polymer actuators under ambient air conditions. 19th International Conference on Composite Materials (ICCM19); Montreal, Canada; July 28 – August 2 2013. , 8282−8283.
1.1.
2012
Must, I.; Kaasik, F.; Põldsalu, I.; Johanson, U.; Punning, A.; Aabloo, A. (2012). A carbide-derived carbon laminate used as a mechanoelectrical sensor. Carbon, 50 (2), 535−541. DOI: 10.1016/j.carbon.2011.09.010.
3.1.
2012
Kaasik, Friedrich; Torop, Janno; Must, Indrek; Soolo, Endel; Põldsalu, Inga; Peikolainen, Anna-Liisa; Palmre, Viljar; Aabloo, Alvo (2012). Ionic EAP transducers with amorphous nanoporous carbon electrodes. In: Proceedings of SPIE (83400V). . SPIE. DOI: 10.1117/12.915136.
3.1.
2012
Must, I.; Kaasik, F.; Põldsalu, I.; Johanson, U.; Punning, A.; Aabloo, A. (2012). Carbon-polymer-ionic liquid composite as a motion sensor. In: Bar-Cohen, Y. (Ed.). Electroactive Polymer Actuators and Devices (EAPAD) 2012 (834019−834019-7). . SPIE. (Proceedings of the SPIE; 8340).

Tööstusomand

6.05.2021

Inga Põldsalu

https://www.etis.ee/CV/Inga_Põldsalu/eng
inga.poldsalu@ut.ee

Career

Institutions and positions
01.01.2015–30.06.2015   
University of Tartu, Faculty of Science and Technology (old), Institute of Technology, University of Tartu, Specialist of Materials Technology (0,80)
01.04.2014–31.12.2014   
University of Tartu, Faculty of Science and Technology (old), Institute of Technology, University of Tartu, Specialist of Materials Technology (0,95)
01.09.2012–31.03.2014   
University of Tartu, Faculty of Science and Technology (old), Institute of Technology, University of Tartu, Specialist of Materials Technology (1,00)
 
 
Education
2012–30.11.2018   
University of Tartu, Engineering and Technology, PhD
2010–2012   
University of Tartu, Materials Science, MSc
2007–2010   
University of Tartu, Materials Science, BSc

Qualifications

Academic degrees
Inga Põldsalu, Doctor's Degree, 2018, (sup) Anna-Liisa Peikolainen; Rudolf Kiefer, Soft actuators with ink-jet printed electrodes, University of Tartu, Faculty of Science and Technology, Institute of Technology.
Inga Põldsalu, Master's Degree, 2012, (sup) Uno Mäeorg; Urmas Johanson; Irep Gözen, An AFM study of reactive sputter-deposited oxide films used as solid support for lipid nanotubes networks, University of Tartu, Faculty of Science and Technology (old).
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS CLASSIFICATION: T152 Composite materials
 
 

Completed projects

Publications

Category
Year
Publication
 
1.1.
2020
Põldsalu, Inga; Rohtlaid, Kätlin; Plesse, Cedric; Vidal, Frédéric; Nguyen, Ngoc Tuan; Peikolainen, Anna-Liisa; Tamm, Tarmo; Kiefer, Rudolf (2020). Printed PEDOT:PSS Trilayer: Mechanism Evaluation and Application in Energy Storage. Materials, 13 (2), 491. DOI: 10.3390/ma13020491.
1.1.
2020
Rinne, Pille; Põldsalu, Inga; Ratas, Herman Klas; Kruusamäe, Karl; Johanson, Urmas; Tamm, Tarmo; Põhako-Esko, Kaija; Punning, Andres; Peikolainen, Anna-Liisa; Kaasik, Friedrich; Must, Indrek; van den Ende, Daan; Aabloo, Alvo (2020). Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators. Journal of Visualized Experiments, 158, e61216. DOI: 10.3791/61216.
1.1.
2019
Rinne, Pille; Põldsalu, Inga; Johanson, Urmas; Tamm, Tarmo; Põhako-Esko, Kaija; Punning, Andres; van den Ende, Daan; Aabloo, Alvo (2019). Encapsulation of ionic electromechanically active polymer actuators. Smart Materials and Structures, 28 (7). DOI: 10.1088/1361-665X/ab18c0.
1.1.
2018
Põldsalu, Inga; Rohtlaid, Kätlin; Nguyen, Tran Minh Giao; Plesse, Cedric; Vidal, Frédéric; Khorram, Mahdi Safaei; Peikolainen, Anna-Liisa; Tamm, Tarmo; Kiefer, Rudolf (2018). Thin ink-jet printed trilayer actuators composed of PEDOT:PSS on interpenetrating polymer networks. Sensors and Actuators B-Chemical, 258, 1072−1079. DOI: 10.1016/j.snb.2017.11.147.
1.1.
2018
Nakshatharan, S. Sunjai; Vunder, Veiko; Põldsalu, Inga; Johanson, Urmas; Punning, Andres; Aabloo, Alvo (2018). Modelling and Control of Ionic Electroactive Polymer Actuators under Varying Humidity Conditions. Actuators, 7 (1). DOI: 10.3390/act7010007.
1.1.
2018
Põldsalu, Inga; Johanson, Urmas; Tamm, Tarmo; Punning, Andres; Greco, Francesco; Peikolainen, Anna-Liisa; Kiefer, Rudolf; Aabloo, Alvo (2018). Mechanical and electro-mechanical properties of EAP actuators with inkjet printed electrodes. Synthetic Metals, 246, 122−127. DOI: 10.1016/j.synthmet.2018.10.009.
2.3.
2018
Põldsalu, Inga (2018). Soft actuators with ink-jet printed electrodes. (Doktoritöö, Tartu Ülikool). University of Tartu Press.
1.1.
2017
Friedrich Kaasik, Indrek Must, Inna Baranova, Inga Põldsalu, Enn Lust, Urmas Johanson, Andres Punning, and Alvo Aabloo (2017). Scalable fabrication of ionic and capacitive laminate actuators for soft robotics. Sensors and Actuators B-Chemical, 246, 154−163. DOI: 10.1016/j.snb.2017.02.065.
1.1.
2017
Põldsalu, Inga; Harjo, Madis; Peikolainen, Anna-Liisa; Tamm, Tarmo; Uibu, Mai; Kiefer, Rudolf (2017). Inkjet‐printed hybrid conducting polymer-activated carbon aerogel linear actuators driven in an organic electrolyte. Sensors and Actuators B-Chemical, 250, 44−51. DOI: 10.1016/j.snb.2017.04.138.
6.8.
2017
Peikolainen, Anna-Liisa; Põhako-Esko, Kaija; Põldsalu, Inga (2017). Tartu teadlased valmistasid koos prantslastega imeõhukese, kuid võimeka tehislihase. http://forte.delfi.ee. 15.12.2017.
1.1.
2015
Must, Indrek; Kaasik, Friedrich; Põldsalu, Inga; Mihkels, Lauri; Johanson, Urmas; Punning, Andres; Aabloo, Alvo (2015). Ionic and Capacitive Artificial Muscle for Biomimetic Soft Robotics. Advanced Engineering Materials, 17 (1), 84−94. DOI: 10.1002/adem.201400246.
3.1.
2015
Põldsalu, Inga; Mändmaa, Sven-Erik; Peikolainen, Anna-Liisa; Kesküla, Arko; Aabloo, Alvo (2015). Fabrication of ion-conducting carbon-polymer composite electrodes by spin-coating. 9430: Electroactive Polymer Actuators and Devices (EAPAD) 2015, San Diego, USA. Published in SPIE Proceedings Vol. 9430, 94301Q. DOI: 10.1117/12.2084180.
3.1.
2015
Punning, A.; Põldsalu, I.; Kaasik, F.; Vunder, V.; Aabloo, A. (2015). Micro-mechanics of ionic electroactive polymer actuators. Proceedings of SPIE - The International Society for Optical Engineering, 9430. SPIE, 94301K. DOI: 10.1117/12.2084202.
3.1.
2015
Punning, A.; Must, I.; Põldsalu, I.; Vunder, V.; Kaasik, F.; Temmer, R.; Aabloo, A. (2015). Long-term degradation of the ionic electroactive polymer actuators. Proceedings of SPIE - The International Society for Optical Engineering, 9430. SPIE, 94300S. DOI: 10.1117/12.2084201.
1.1.
2014
Punning, A.; Kim, K.; Palmre, V.; Vidal, F.; Plesse, C.; Festin, N.; Maziz, A.; Askaka, K.; Sugino, T.; Alici, G.; Spinks, G.; Wallace, G.; Must, I.; Põldsalu, I.; Vunder, V.; Temmer, R.; Kruusamäe, K.; Torop, J.; Kaasik, F.; Rinne, P. ... Aabloo, A. (2014). Ionic electroactive polymer artificial muscles in space applications. Scientific Reports, 4 (6913), 1−6.
1.1.
2014
Must, Indrek; Vunder, Veiko; Kaasik, Friedrich; Põldsalu, Inga; Johanson, Urmas; Punning, Andres; Aabloo, Alvo. (2014). Ionic liquid-based actuators working in air: The effect of ambient humidity. Sensors and Actuators B-Chemical, 202, 114−122. DOI: 10.1016/j.snb.2014.05.074.
1.1.
2014
Vunder, V.; Itik, M.; Põldsalu, I.; Punning, A.; Aabloo, A. (2014). Inversion-based control of ionic polymer-metal composite actuators with nanoporous carbon-based electrodes. Smart Materials and Structures, 23 (2), ARTN 025010. DOI: 10.1088/0964-1726/23/2/025010.
1.1.
2014
Punning, Andres; Must, Indrek; Poldsalu, Inga; Vunder, Veiko; Temmer, Rauno; Kruusamaee, Karl; Kaasik, Friedrich; Torop, Janno; Rinne, Pille; Lulla, Tonis; Johanson, Urmas; Tamm, Tarmo; Aabloo, Alvo (2014). Lifetime measurements of ionic electroactive polymer actuators. Journal of Intelligent Material Systems and Structures, 25 (18), 2267−2275. DOI: 10.1177/1045389X14546656.
3.1.
2014
Must, Indrek; Kaasik, Friedrich; Põldsalu, Inga; Mihkels, Lauri; Johanson, Urmas; Punning, Andres; Aabloo, Alvo (2014). Pulse-Width-Modulated Charging of Ionic and Capacitive Actuators. In: Advanced Intelligent Mechatronics (AIM), 2014 IEEE/ASME International Conference on (1446−1451). . IEEE. DOI: 10.1109/AIM.2014.6878286.
5.2.
2014
Põldsalu, Inga; Peikolainen, Anna-Liisa; Kaasik, Friedrich; Vunder, Veiko; Must, Indrek; Greco, Francesco; Aabloo, Alvo (2014). Inkjet printed PEDOT:PSS-carbon aerogel actuators. In: EuroEAP 2014 Fourth international conference on Electromechanically Active Polymer (EAP) transducers & artificial muscles. Euro EAP, Linköping, Sweden, 10/06/2014 - 11/06/2014.
1.1.
2013
Must, Indrek; Anton, Mart; Viidalepp, Erki; Põldsalu, Inga; Punning, Andres; Aabloo, Alvo (2013). Mechanoelectrical impedance of a carbide-derived carbon-based laminate motion sensor at large bending deflections. Smart Materials & Structures, 22 (10), nr 104015. DOI: 10.1088/0964-1726/22/10/104015.
1.1.
2013
Gozen, Irep; Shaali, Mehrnaz; Ainla, Alar; Ortmen, Bahanur; Põldsalu, Inga; Kustanovich, Kiryl; David, Gavin; Jeffries, Michael; Konkoli, Zoran; Dommersnes, Paul; Jesorka, Aldo (2013). Thermal Migration of Molecular Lipid Films as Contactless Fabrication Strategy for Lipid Nanotube Networks. Lab on a Chip, 13 (19), 3822−3826.10.1039/C3LC50391G.
1.1.
2013
Must, Indrek; Johanson, Urmas; Kaasik, Friedrich; Põldsalu, Inga; Punning, Andres; Aabloo, Alvo (2013). Charging a supercapacitor-like laminate with ambient moisture: from a humidity sensor to an energy harvester. Physical Chemistry Chemical Physics, 15 (24), 9605−9614. DOI: 10.1039/c3cp51526e.
1.1.
2013
Gözen, Irep; Ortmen, Bahanur; Põldsalu, Inga; Dommersnes, Paul; Orwar, Owe; Jesorka, Aldo (2013). Repair of large area pores in supported double bilayers. Soft Matter, 9 (10), 2787−2792.10.1039/c3sm27429b.
3.1.
2013
Must, Indrek; Johanson, Urmas; Kaasik, Friedrich; Põldsalu, Inga; Punning, Andres; Aabloo, Alvo (2013). An ionic liquid-based actuator as a humidity sensor. 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM); Wollongong, Australia; 9-12 July 2013. , 1498−1503. DOI: 10.1109/AIM.2013.6584307.
5.2.
2013
Must, Indrek; Põldsalu, Inga; Kaasik, Friedrich; Johanson, Urmas; Punning, Andres; Aabloo, Alvo (2013). The performance of the ionic liquid‐containing electroactive polymer actuators under ambient air conditions. 19th International Conference on Composite Materials (ICCM19); Montreal, Canada; July 28 – August 2 2013. , 8282−8283.
1.1.
2012
Must, I.; Kaasik, F.; Põldsalu, I.; Johanson, U.; Punning, A.; Aabloo, A. (2012). A carbide-derived carbon laminate used as a mechanoelectrical sensor. Carbon, 50 (2), 535−541. DOI: 10.1016/j.carbon.2011.09.010.
3.1.
2012
Kaasik, Friedrich; Torop, Janno; Must, Indrek; Soolo, Endel; Põldsalu, Inga; Peikolainen, Anna-Liisa; Palmre, Viljar; Aabloo, Alvo (2012). Ionic EAP transducers with amorphous nanoporous carbon electrodes. In: Proceedings of SPIE (83400V). . SPIE. DOI: 10.1117/12.915136.
3.1.
2012
Must, I.; Kaasik, F.; Põldsalu, I.; Johanson, U.; Punning, A.; Aabloo, A. (2012). Carbon-polymer-ionic liquid composite as a motion sensor. In: Bar-Cohen, Y. (Ed.). Electroactive Polymer Actuators and Devices (EAPAD) 2012 (834019−834019-7). . SPIE. (Proceedings of the SPIE; 8340).

Industrial property

6.05.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Uus otsing (Beetaversioon) Lihtotsing Tühjenda
  • Leitud 5 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
PUT; PUT_SPPUT16963D prinditud naatrium-polümeer mikroaku süsinikkserogeel elektroodidega01.01.201731.03.2021Anna-Liisa PeikolainenTartu Ülikool, Loodus- ja täppisteaduste valdkond, tehnoloogiainstituut172 800,00 EUR
MUUSLOTI12156T (3.2.1101.12-0007)Elecktroaktiivsed nanopoorse süsiniku komposiitkilede tehnoloogia01.07.201231.12.2014Alvo AablooTartu Ülikool385 106,25 EUR
SFSF0180008s08Ioonsed elektroaktiivsed polümeersed materjalid, nende juhtimine ja rakendused01.01.200831.12.2013Alvo AablooTartu Ülikool, Loodus- ja tehnoloogiateaduskond, Tartu Ülikooli Tehnoloogiainstituut579 395,52 EUR
MUUSLOTI12166T (3.2.1101.12-0002)Pehmed materjalid miniaturiseeritavate kantavate andurite ja tagasiside rakenduste tarbeks spordis ja taastusravis.01.09.201231.08.2014Tarmo TammTartu Ülikool; Tartu Ülikool, Loodus- ja tehnoloogiateaduskond608 440,00 EUR
IUTIUT20-24Reaktiivsed arukad polümeersed komposiidid ja nende rakendused kiiptehnoloogias ning robootikas01.01.201431.12.2019Alvo AablooTartu Ülikool, Loodus- ja täppisteaduste valdkond, tehnoloogiainstituut1 013 400,00 EUR