See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Juhan Laugis

https://www.etis.ee/CV/Juhan_Laugis/est
7.03.1938
1.11.2010
6203702
5116533
laugis@cc.ttu.ee

Teenistuskäik

Töökohad ja ametid
Alates 1964. aastast TTÜ vanemõpetaja, dotsent, professor
 
 
Haridustee
1982–1987   
Doktoriõpe
1965–1970   
Aspirantuur
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
TTÜ Nõukogu liige
TTÜ energeetikateaduskonna nõukogu liige
Elektriajamite ja jõuelektroonika instituudi direktor
Rahvusvahelise konverentsi EPE-PEMC 2004 (ca 550 osavõtjat) korralduskomitee liige perioodil 2002-2004;
Rahvusvahelise konverentsi The 13-th International Scientific-technical Conference "Alternating current electrical drives, ACED 05" (Venemaa) korralduskomitee liige;
4-th International Workshop Compatibility in Power Electronics, CPE 2005, (Poola) korralduskomitee liige;
Rahvusvahelise konverentsi "Automation and Control Technologies - 2004" (Leedu) korralduskomitee liige
Rahvusvahelise konverentsi Unconventional Electromechanical and Electrical Systems UEES'04 (Ukraina) korralduskomitee liige.
2006−2006   
BEC 2006, the 10th Biennial Conference on Electronics and Microsystem Technology, korralduskomitee liige

Kvalifikatsioon

Teaduskraadid
Juhan Laugis, doktorikraad, 1987, (juh) , Разработка новых видов электрооборудования для гибково автоматизированнава литеиново производства, Leningradi Elektrotehnikainstituut, NSVL Kõrgem atestatsioonikomisjon.
 
 
Lisainfo
tehnikadoktor
Leningradi Elektrotehnikainstituut, NSVL Kõrgem atestatsioonikomisjon, 1987

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
3.2.
2009
Laugis, J.; Lehtla, T.; Vodovozov, V. (2009). Distance Learning in Electrical Engineering. 6th International Symposium "Topical Problems in the Field of Electrical and Power Engineering", Doctoral School of Energy and Geotechnology. Kuressaare, Estonia, 12.01.-17.01.2009. _EditorsAbbr Lahtmets, R. Kuressaare, Estonia: Estonian Society of M.H.Jacobi, 148−153.
2.2.
2008
Laugis, J.; Lehtla, T.; Joller, J.; Rosin, A.; Vinnikov, D.; Lehtla, M. (2008). Traction and Control of Light Rail Vehicles. Tallinn: Tallinn University of Technology Press.
2.2.
2008
Laugis, J.; Lehtla, T.; Joller, J.; Rosin, A.; Vinnikov, D.; Lehtla, M. (2008). Kergrööbassõidukite ajamid ja juhtimine. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
3.1.
2008
Vinnikov, D.; Laugis, J.; Jalakas, T. (2008). Evaluation of Different High-Voltage Switch Solutions for High-Power Converters Used in Rolling Stock. Proceedings of 2008 IEEE International Symposium on Industrial Electronics: 2008 IEEE International Symposium on Industrial Electronics, 30 June-2 July 2008, Cambridge, United Kingdom. Cambridge, United Kingdom: IEEE, 214−219.
3.1.
2008
Vinnikov, D; Laugis, J.; Galkin, I. (2008). Middle-Frequency Isolation Transformer Design Issues for the High-Voltage DC/DC Converter. Proceedings of 2008 IEEE 39th Annual Power Electronics Specialists Conference: 2008 IEEE 39th Annual Power Electronics Specialists Conference, Greece, June 15-19, 2008. Greece: IEEE, 1930−1936.
3.1.
2008
Vodovozov, V.; Vinnikov, D.; Laugis, J.; Lehtla, T. (2008). Interinstitutional Activity in Professional Training in Power Electronics. Proceedings of International Symposium on Power Electronics, Electrical Drives, Automation and Motion: International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, Ischia, June 11-13, 2008. Ischia, Italy: IEEE, 492−495.
3.1.
2008
Jalakas, T.; Vinnikov, D.; Laugis, J. (2008). Light Load Operation of 6.5 kV 200 A IGBTs in Half-Bridge Configuration. Proceedings of International Symposium on Power Electronics, Electrical Drives, Automation and Motion: International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, Ischia, June 11-13, 2008. Ischia, Italy: IEEE, 1373−1378.
3.1.
2008
Vodovozov, V.; Laugis, J. (2008). Expert System for Electric Drive Design. Proceedings of 13th International Power Electronics and Motion Control Conference EPE-PEMC 2008, CD-ROM: 13th International Power Electronics and Motion Control Conference EPE-PEMC 2008, 1-3 September, 2008, Poznan, Poland. Poznan, Poland: IEEE, 1017−1019.
3.4.
2008
Laugis, J.; Vodovozov, V. (2008). Motor Drive Design in Database Environment. 6th International Conference on Electrical Engineering ICEENG 2008, Paper EE018. Cairo, Egypt,.
3.4.
2008
Laugis, J.; Vodovozov, V. (2008). Educational Collaboration in the Field of Power Electronics and Electromechanics. International Conference on International Education and Science Cooperation IESC 2008. St. Petersburg, Russia: St.Petersburg State Polytechnic University Publishing House, 243−245.
3.4.
2008
Винников, Д.; Лаугис, Ю.; Лехтла, Т.; Егоров, М. (2008). O результатах многолетнего сотрудничества Института Электропривода и Силовой Электроники ТТУ с Таллиннским Трамвайно–Троллейбусным Объединением. International Education and Science Cooperation : Proceedings of the International Conference: International Education and Science Cooperation IESC 2008, St.-Petersburg, 02.06.-06.06.2008. Russia: Издательство "Фаст–Принт", 271−279.
3.4.
2008
Vinnikov, D.; Laugis, J.; Strzelecki, R.; Egorov, M. (2008). 6.5 kV IGBT Switch Realization Possibilities and Their Feasibility Study for High-Power Applications. Proceedings of the 6th International Conference on Electrical Engineering: 6th International Conference on Electrical Engineering ICEENG-6, 27-29 May, 2008, Cairo, Egypt. Ed. Military Technical College, Cairo, Egypt. Cairo, Egypt, 9 pp.
3.4.
2008
Ruban, O.; Laugis, J. (2008). Troubleshooting and Debugging Tools. In: Lahtmets, R. (Ed.). 5th International Symposium "Topical problems in the field of electrical and power engineering" : doctoral school of energy and geotechnology, Kuressaare, Estonia, January 14-19, 2008 (216 −221).. Tallinn University of Technology.
1.2.
2007
Vinnikov, D.; Jalakas, T.; Laugis, J. (2007). Development of 50-kW isolated DC/DC converter with high-voltage IGBTs. Przegląd Elektrotechniczny / Electrical Review, 10, 103−107.
3.1.
2007
Ruban, O.; Laugis, J. (2007). Using Signal Filters in the PID Loops. Proceeding of the 2nd International Conference on Electrical and Control Technologies: 2nd International Conference "Automation and control technologies ECT - 2007", Kaunas (Lithuania), 3-4 May 2007. Toim. Navickas, A.; Sauhats, A.; Virbalis, A.; Ažubalis, V. Kaunas: Kaunas University of Technology, 45 −49.
3.1.
2007
Vinnikov, D.; Laugis, J. (2007). High-Voltage Auxiliary Power Supply with the Simplified Power Circuit Topology for the DC Trains. IEEE Proceedings of the 9th International Conference "Electrical Power Quality and Utilisation" : EPQU’2007: 9th International Conference "Electrical Power Quality and Utilisation", Barcelona (Spain), October 9-11, 2007. IEEE, 1−6.
3.1.
2007
Armas, J.; Laugis, J. (2007). Increase pedestrian safety by critical crossroads: lighting measurements and analysis. 12th European Conference on Power Electronics and Applications EPE 2007, CD-ROM: 12th European Conference on Power Electronics and Applications, 2 - 5 September 2007, Aalborg (Denmark). IEEE, 10 pp.
3.1.
2007
Vodovozov, V.; Laugis, J. (2007). Universities Collaboration in Teaching Power Electronics. 12th European Conference on Power Electronics and Applications EPE 2007, CD-ROM: 12th European Conference on Power Electronics and Applications, 2 - 5 September 2007, Aalborg (Denmark). IEEE, 8 pp.
3.1.
2007
Vodovozov, V.; Laugis, J. (2007). Object-Oriented Electric Drive Development Technology. Proceedings of the International Electric Machines and Drives Conference IEMDC2007. May 3-5 Antalya Turkey, 2: 2007 IEEE International Electric Machines and Drives Conference, May 3-5, Antalya, Turkey. IEEE, 1215−1219.
3.1.
2007
Vinnikov, D.; Laugis, J., Jalakas, T. (2007). Development of Auxiliary Power Supplies for the 3.0 kV DC Rolling Stock. ISIE2007: 2007 IEEE International Symposium on Industrial Electronics. June 4-7, 2007, Vigo (Spain). IEEE, 359−364.
3.1.
2007
Jalakas, T.; Vinnikov, D.; Laugis, J. (2007). Development of 50-kW Isolated DC/DC Converter with High-Voltage IGBTs. 5th International Conference-Workshop on Compatibility in Power Electronics CPE’2007: 5th International Conference-Workshop on Compatibility in Power Electronics CPE’2007, May 29 - June 1, 2007, Gdańsk, Poland. Gdynia: IEEE, 6 pp.
3.2.
2007
Jalakas, T.; Vinnikov, D.; Laugis, J. (2007). Output Rectifier for the High-Voltage High-Frequency Isolated DC/DC Converter. In: Scientific proceedings of Riga Technical University. Power and Electrical Engineering (84−95). . Riga: Riga Technical University.
3.4.
2007
Vinnikov, D.; Laugis, J. (2007). High-Voltage Half-Bridge IGBT Inverter. Proceedings of 16th International Conference „Electrical Drives and Power Electronics EDPE’2007”: 16th International Conference „Electrical Drives and Power Electronics EDPE’2007”. The High Tatras (Slovakia), 24 – 26 September, 2007. , 6 pp.
3.4.
2007
Armas, J.; Laugis, J. (2007). Road Safety by Improved Road Lighting: Road Lighting Measurements and Analysis. In: Lahtmets, R. (_EditorsAbbr). 4th International Symposium "Topical problems of education in the field of electrical and power engineering". Doctoral school of energy and geotechnology : Kuressaare, Estonia, January 15-20, 2007 (83−90).. Tallinn; Kuressaare: Tallinn University of Technology, Faculty of Power Engineering; Elektriajam.
3.4.
2007
Chubarev, K.; Vinnikov, D.; Laugis, J. (2007). Dynamic Positioning System for the Multifunctional Vessel EVA-316. 8th International Workshop on Research and Education in Mechatronics 2007: 8th International Workshop on Research and Education in Mechatronics 2007, REM-2007, Tallinn, Estonia, 14-15 June 2007. Tallinn: Tallinn University of Technology Press, 142−145.
3.4.
2007
Jalakas, T.; Roasto, I.; Müür, M.; Vinnikov, D.; Laugis, J. (2007). Research and Development of Voltage Converters Based on 6.5 kV IGBTs. International Youth Conference on Energetics IYCE-2007, 31.05.-02.06.2007, Budapest, Hungary. , 153−154.
3.4.
2007
Ruban, O.; Laugis, J. (2007). Some Aspects of Closed Control Loop Design. In: Lahtmets, R. (Ed.). 4th International Symposium "Topical problems of education in the field of electrical and power engineering". Doctoral school of energy and geotechnology : Kuressaare, Estonia, January 15-20, 2007 (192−199).. Tallinn: Tallinn University of Technology, Faculty of Power Engineering; Elektriajam.
1.2.
2006
Vinnikov, D.; Laugis, J. (2006). Overcoming EMI Problems in the High-Power High-Frequency DC/DC Converters - a Case Study. Технiчна електродинамiка, 5, 33−37.
3.1.
2006
Lehtla, Madis; Laugis, Juhan (2006). Computer Models for Simulation and Control of a Traction Supply System. 12th International Power Electronics and Motion Control Conference: EPE-PEMC 2006: 12th International Power Electronics and Motion Control Conference, August 30 - September 1, 2006. Portorož, Slovenia: IEEE-Inst Electrical Electronics Engineers Inc, 1372−1377.
3.1.
2006
Rosin, A.; Möller, T.; Laugis, J. (2006). Maintenance Analyses, Control and Supervision System Design of Light Rail – An Application in Estonia. IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics: The 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris - FRANCE, November 7 - 10, 2006. IEE, 1602−1607. DOI: 10.1109/IECON.2006.347343.
3.1.
2006
Galkin, I.; Laugis, J. (2006). Modular Approach to Training Hardware Design for Modular Teaching. EPE-PEMC 2006 : 12th International Power Electronics and Motion Control Conference : Proceedings, CD-ROM: 12th International Power Electronics and Motion Control Conference (EPE/PEMC 2006), Portoroz, Slovenia, August 30 - September 1, 2006. IEEE, 1715−1720.
3.1.
2006
Sokolovs, A.; Galkin, I.; Krievs, O.; Laugis, J. (2006). Simulation Methods for 3x3 Matrix Converter. EPE-PEMC 2006 : 12th International Power Electronics and Motion Control Conference : Proceedings, CD-ROM: 12th International Power Electronics and Motion Control Conference (EPE/PEMC 2006), Portoroz, Slovenia, August 30 - September 1, 2006. IEEE,.
3.4.
2006
Ruban, O.; Laugis, J (2006). PLC and Control Systems. Tarptautines konferencijos Elektros ir vladymos technologijos - 2006 : pranešimu medžiaga = Proceedings of International Conference Electrical and Control Technologies - 2006: International Conference on Electrical and Control Technologies, Kaunas, 4-5 May. Kaunas: Technologija, 504−509.
3.4.
2006
Armas, J.; Laugis, J. (2006). Emergency lighting. In: 3rd International Symposium "Topical problems of education in the field of electrical and power engineering" : doctoral school of energy and geotechnology : Kuressaare, Estonia, January 16-21, 2006 (138−144).. Tallinn : Tallinn University of Technology, Department of Electrical Drives and Power Electronics.
3.4.
2006
Ruban, O.; Laugis, J. (2006). Automatic flow-through control with PI and PID controllers. 3rd International Symposium "Topical problems of education in the field of electrical and power engineering" : doctoral school of energy and geotechnology: 3rd International Symposium "Topical problems of education in the field of electrical and power engineering" . Kuressaare (Estonia), January 16-21, 2006. Ed. Lahtmets, R. Tallinn : Tallinn University of Technology, Department of Electrical Drives and Power Electronics, 106−111.
3.4.
2006
Sokolovs, A.; Galkin, I.; Laugis, J. (2006). Simulation of a simple control strategy for a common 3X3 matrix converter. 3rd International Symposium "Topical problems of education in the field of electrical and power engineering" : doctoral school of energy and geotechnology : Kuressaare, Estonia, January 16-21, 2006. _EditorsAbbr Lahtmets, R. Tallinn : Tallinn University of Technology, Department of Electrical Drives and Power Electronics, 40−44.
6.6.
2006
Laugis, J. (2006). Endel Risthein 80. Elektriala, 8 (3), 22−24.
6.6.
2006
Laugis, J. (2006). Poolsada aastat. Elektriala, 8 (4), 7.
6.6.
2006
Laugis, J.; Risthein, E. (2006). TTÜ elektriajamite- ja jõuenergeetika instituudi arenguteest. Elektriala, 8 (4), 9−12.
1.2.
2005
Lehtla, T.; Laugis, J.; Vinnikov, D. (2005). О нововведениях в учебном процессе в Институте электропривода и силовой электроники Таллиннского Технического Университета. Технiчна електродинамiка, 2, 100−103.
3.1.
2005
Laugis, J.; Lehtla, T. (2005). Comparison of university level study methods and laboratory equipment for teaching of electrical drives. EPE 2005 Dresden : 11th European Conference on Power Electronics and Applications. Proceedings. CD-ROM : 11 - 14 September 2005, Dresden, Germany: European Conference on Power Electronics and Applications, Dresden 11.-14.09.2005. IEEE Press, 8 pp.
3.4.
2005
Galkin, I.; Skarainis, M.; Laugis, J.; Lehtla, T. (2005). Primenenie mikrokontrollera MSR430 v katšestve trenirovotšnoga mikroprotsessornoggo ustroistva. Tehnitšna elektrodinamika. , 90−93.
3.4.
2005
Armas, Jelena; Laugis, Juhan (2005). Tunnel lighting. 2nd International Symposium "Topical Problems of Education in the Field of Electrical and Power Engineering" Kuressaare, Estonia, January 17-22, 2005 (73−79).. Kuressaare, Estonia: TTÜ elektriajamite ja jõuelektroonika instituut.
3.4.
2005
"Kimmer, Thomas;Boiko, Vitali;Laugis, Juhan" (2005). Bestimmung der Parameter des Ersazschaltbildes eines Asynchronmotors für eine feldorientierte Regelung. 2nd International Symposium "Topical Problems of Education in the Field of Electrical and Power Engineering" (98−101).. Kuressaare: Tallinn University of Technology, Faculty of Power Engineering.
3.4.
2005
"Armas, Jelena;Laugis, Juhan" (2005). Tunnel lightning. 2nd International Symposium "Topical Problems of Education in the Field of Electrical and Power Engineering" (73−79).. Kuressaare: TTÜ elektriajamite ja jõuelektroonika instituut.
3.4.
2005
Boiko, V.; Laugis, J. (2005). EMI problems of Current Measurements in Inverters with High Switching Frequency. Compatibility in Power Electronics, 135−137.
1.2.
2004
Vinnikov, D.; Boiko, V.; Lehtla, M.; Rosin, A.; Laugis, J. (2004). Об опыте института электропривода и силовой электроники ТТУ в области модернизации электроподвижного состава Таллиннского трамвайного парка. Технiчна електродинамiка, 3, 52−55.
3.1.
2004
Boiko, Vitali; Laugis, Juhan (2004). A speed measurement method in the model drive with field-oriented control. BEC 2004 : proceedings of the 9th Biennial Baltic Electronics Conference : October 3-6, 2004, Tallinn, Estonia, 337−338.
3.1.
2004
Pettai, E.; Laugis, J.; Lehtla, T.; Joller, J.; Rosin, A. (2004). Distributed Energy Supply System for Electric Vehicles. 6: 11-th International Conference on Power Electronics and Motion Control. EPE-PEMC 2004 Riga. Riga Technical University, 218−221. (Proceedings ).
3.1.
2004
Lehtla, M.; Laugis, J. (2004). Control System for Electric Traction Drive. Proceedings of the 9th Biennial Baltic Electronics Conference: BEC 2004: proceedings of the 9th Biennial Baltic Electronics Conference October 3-6, 2004, Tallinn. Tallinn, 331−332.
3.1.
2004
Boiko, V.; Laugis, J. (2004). Behavior of the Dual-Motor Traction Drives in the Different Operation Modes. 11th International Power Electronics and Motion Control Conference: Riga, Latvia, 2-4 September, 2004. , 6-165−6-168.
3.2.
2004
Boiko, Vitali; Laugis, Juhan (2004). Моделирование динамического ослабления поля асинхронного двигателя. . . Kiiev.
3.4.
2004
Laugis, J.; Lehtla, T.; Pettai, E.; Joller, J.; Rosin, A.; Lehtla, M.; Vinnikov, D. (2004). Modernization of Trams in Estonia. 2: Unconventional Electromechanical and Electrical Systems UEES’04, 24-29. September 2004, Ukraine. Alushta, 561−564.
3.4.
2004
Бойко, В.; Винников, Д.; Лаугис, Ю. (2004). Решение задачи измерения скорости в макете привода с векторным управлением. Proceedings of the International Conference "Automation and Control Technologies - 2004": International Conference "Automation and Control Technologies - 2004". Kaunas (Lithuania), May 13 2004. Kaunas, 43−45.
3.4.
2004
Laugis, J.; Ruban, O. (2004). Профессиональное обучение В Эстонии в области электротехники и автоматики. Proceedings of the International Conference "Automation and Control Technologies ": International Conference "Automation and Control Technologies " Kaunas (Lithuania), May 13, 2004. 38−42.
1.2.
2003
Vinnikov, D.; Boiko, V.; Laugis, J. (2003). Исследование возможностей применения ультраконденсаторов в электросистеме автомобиля. Технiчна електродинамiка, 3, 27−30.
3.4.
2003
Lehtla, M.; Joller, J.; Laugis, J. (2003). Operation and diagnostics of the tram traction drive. Compatibility of Power Electronics CPE2003, Gdansk, Poland 2003. , 61−63, CD.
3.4.
2003
Vinnikov, Dmitri; Boiko, Vitali; Laugis, Juhan (2003). Analysis of possibilities of replacing automotive accumulators for ultracondensers. International conference Conditions and Prospects for Development of Electrical Technology: Ivanovo, Russija: Ivanovo State Institute of Electrical Engineering, 2003.
1.2.
2002
Винников, Д.; Бойко, В.; Лаугис, Ю. (2002). Разработка и исследование статического преобразователя напряжения для трамвая. Техчнiчна Електродинамiка, 1, 3−6.
3.1.
2002
Laugis, J.; Lehtla, T.; Joller, J.; Boiko, V.; Vinnikov, D.; Lehtla, M. (2002). Modernization of electrical transport systems in Estonia. 10-th International POWER ELECTRONICS and MOTION CONTROL Conference EPE-PEMC: 2002, Cavtat & Dubrovnik. Cavtat & Dubrovnik.
3.1.
2002
"Laugis, Juhan;Lehtla, Tõnu" (2002). Mechatronics new study field or new branch of science and engineering. 10th International Power Electronics and Motion Control Conference (PEMC'2002), Cavtat & Dubrovnik. IEE, puudub−puudub.
3.2.
2002
Vinnikov, D.; Lehtla, M.; Joller, J.; Laugis, J. (2002). Research and development of voltage converter for trams. In: Scientific proceedings of Riga Technical University. Power and Electrical Engineering (72−76). . Riga: Riga Technical University.
3.4.
2002
Бойко, B.; Винников, Д.; Лаугис, Ю.; Игнатов, С. (2002). Модернизация установки “Universalprüfmaschine Zwick 1435” на Пярнуской лыжной фабрике. Proceedings of the International Conference "Automation and Control Technologies - 2002": International Conference "Automation and Control Technologies - 2002". Kaunas (Lithuania), May 14 2002. Kaunas: Technologija, 9−11.
3.4.
2001
Лаугис, Ю.; Лехтла, Т.; Йоллер, Ю.; Бойко, В.; Винников, Д.; Лехтла, М. (2001). Состояние и тенденции развития электротранспорта Эстонии. Тезисы докладов. III Международная (XIV Всероссийская) конференция по автоматизированному электроприводу (АЭП-2001): III Международная (XIV Всероссийская) конференция по автоматизированному электроприводу (АЭП-2001). Нижний Новгород, 12-14 сентября 2001. Нижний Новгород, 243−245.
3.1.
2000
Rosin, Argo; Lehtla, Tõnu; Laugis, Juhan (2000). Mechatronics in initial vocational training. The 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference" : BEC 2000 : October 8-11, 2000, conference proceedings (225−228).. Tallinn, Estonia : Tallinn Technical University.
3.1.
2000
Joller, Jüri; Lehtla, Madis; Lehtla, Tõnu; Laugis, Juhan (2000). Tram traction drives and comparison of their control methods. The 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference" : BEC 2000 : October 8-11, 2000, conference proceedings (203−204). . Tallinn, Estonia : Tallinn Technical University.
3.1.
2000
Laugis, Juhan; Vinnikov, Dmitri; Boiko, Vitali (2000). Analysis of drawbacks and reconst[r]uction problems of the R2-type train. The 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference" : BEC 2000 : October 8-11, 2000, conference proceedings (355−358). . Tallinn, Estonia : Tallinn Technical University.
3.1.
2000
Rosin, A.; Laugis, J.; Lehtla, T. (2000). Mechatronics in initial vocational training. The 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference": BEC 2000: October 8-11, 2000, Tallinn, Estonia. Tallinn: Tallinn University of Technology, 225−228.
3.1.
2000
Joller, J.; Lehtla, M.; Lehtla, T.; Laugis, J. (2000). Tram traction drives and comparison of their control methods. proceeding of 7th Biennial Conference on Electronics and Microsystem Technology. BEC’2000 8-11 Oktober, 2000. Tallinn. , 203−204.
3.1.
2000
Lehtla, T.; Joller, J.; Lehtla, M.; Laugis, J. (2000). Parameter Identification and Comparison of an Induction Motor Models. IEE Conference Publication No. 475: 8th International Conference of Power Electronics and Variable Speed Drives, London, 2000. London: IEE, 201−205.
3.4.
2000
Rosin, A.; Laugis, J.; Lehtla, T. (2000). Experimental Sand-filter Systems in Tallinn Water Treatment Plant. 4th international PLCopen conference on Industrial Control Programming, ICP Conference, Utrecht, 10…11 October 2000. , 39−44.
6.3.
2000
Laugis, Juhan (2000). Kuhu areneb elektriajam? Elektriala, 5, 3−3.
3.3.
1999
Jõeveer, M.; Laugis, J.; Risthein, E.; Lehtla, T. (koostajad) (1999). Elektriku kalender 2000. Tallinn: Tallinna Tehnikaülikooli elektriajamite ja jõuelektroonika instituut.
3.4.
1999
Rosin, A.; Laugis, J.; Lehtla, T. (1999). Using of Industry Automation Software and Hardware in Education and Training. 4th International Scientific Colloquium CAx Techniques Bielefeld, 13-15 September, 1999. , 119−124.
3.4.
1999
Rosin, A.; Laugis, J.; Lehtla, T. (1999). Mechatronics - New Profession in Estonia? The Research Symposium of Young Scientists “Actual Problem of Electrical Drives and Industry Automation”, Tallinn, Estonia May 31...June 5, 1999. TTÜ elektriajamite ja jõuelektroonika instituut, 79−81.
3.4.
1999
Boiko, Vitali; Laugis, Juhan (1999). Vibrationsmessgerät auf der Basis von Signalprozessor. Actual problems of electrical drives and industry automation , 71−72.
3.4.
1997
Laugis, Juhan (1997). Research and study process in the Department of Electrical Drives and Power Electronic. Actual problems of electrical drives and industry automation (19−24).. Tallinn: Tallinn Technical University.
3.4.
1997
Laugis, J.; Lehtla, T. (1997). Control of Special Purpose Linear Drives. EPE'97 : 7th European Conference on Power Electronics and Applications, 8-10 September 1997, Trondheim, Norway : proceedings, 3: 7th European Conference on Power Electronics and Applications (EPE’ 97), Trondheim 8-10.09.1997. Brussels: EPE Association, 541−546.
3.4.
1996
Laugis, J.; Lehtla, T. (1996). Linear Induction Motors for Multi Purpose Energy Conversion. Power Electronics and Motion Control Conference PEMC’96: 7th Conference, Exhibition and Tutorials on Power Electronics and Motion Control PEMC' 96, Budapest 02-04.09.1996. 88−92.
3.3.
1994
Laugis, J.; Lehtla, T.; Loigom, V.; Risthein, E.; Tomson, J. (koostajad) (1994). Elektriku kalender 1995. Tallinn: TTÜ elektriajamite ja jõuelektroonika instituut.
6.2.
1994
Laugis, J.; Lehtla, T. (1994). Asünkroonajamite sagedusjuhtimine. Tallinn: Tallinna Tehnikaülikool.
6.2.
1965
Agur, Ustus; Laugis, Juhan (1965). Elektriajamid II osa : laboratoorsete tööde juhendite kogumik. Tallinn: Tallinna Polütehniline Instituut.
6.7.
0
Pettai, E.; Laugis, J.; Lehtla, T.; Joller, J.; Rosin, A. (0). Toiteliiniga seotud sõidukite energiavahetuse juhtimissüsteem. Eesti patent EE200200424. Eest Patent EE200200424. .

Tööstusomand

25.09.2021

Juhan Laugis

https://www.etis.ee/CV/Juhan_Laugis/eng
7.03.1938
1.11.2010
6203702
5116533
laugis@cc.ttu.ee

Career

Education
1982–1987   
Doctoral study
1965–1970   
Postgraduate study

Qualifications

Academic degrees
Juhan Laugis, Doctor's Degree, 1987, (sup) , Разработка новых видов электрооборудования для гибково автоматизированнава литеиново производства (Разработка новых видов электрооборудования для гибково автоматизированнава литеиново производства), Leningradi Elektrotehnikainstituut, NSVL Kõrgem atestatsioonikomisjon.
 
 

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
3.2.
2009
Laugis, J.; Lehtla, T.; Vodovozov, V. (2009). Distance Learning in Electrical Engineering. 6th International Symposium "Topical Problems in the Field of Electrical and Power Engineering", Doctoral School of Energy and Geotechnology. Kuressaare, Estonia, 12.01.-17.01.2009. _EditorsAbbr Lahtmets, R. Kuressaare, Estonia: Estonian Society of M.H.Jacobi, 148−153.
2.2.
2008
Laugis, J.; Lehtla, T.; Joller, J.; Rosin, A.; Vinnikov, D.; Lehtla, M. (2008). Traction and Control of Light Rail Vehicles. Tallinn: Tallinn University of Technology Press.
2.2.
2008
Laugis, J.; Lehtla, T.; Joller, J.; Rosin, A.; Vinnikov, D.; Lehtla, M. (2008). Kergrööbassõidukite ajamid ja juhtimine. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
3.1.
2008
Vinnikov, D.; Laugis, J.; Jalakas, T. (2008). Evaluation of Different High-Voltage Switch Solutions for High-Power Converters Used in Rolling Stock. Proceedings of 2008 IEEE International Symposium on Industrial Electronics: 2008 IEEE International Symposium on Industrial Electronics, 30 June-2 July 2008, Cambridge, United Kingdom. Cambridge, United Kingdom: IEEE, 214−219.
3.1.
2008
Vinnikov, D; Laugis, J.; Galkin, I. (2008). Middle-Frequency Isolation Transformer Design Issues for the High-Voltage DC/DC Converter. Proceedings of 2008 IEEE 39th Annual Power Electronics Specialists Conference: 2008 IEEE 39th Annual Power Electronics Specialists Conference, Greece, June 15-19, 2008. Greece: IEEE, 1930−1936.
3.1.
2008
Vodovozov, V.; Vinnikov, D.; Laugis, J.; Lehtla, T. (2008). Interinstitutional Activity in Professional Training in Power Electronics. Proceedings of International Symposium on Power Electronics, Electrical Drives, Automation and Motion: International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, Ischia, June 11-13, 2008. Ischia, Italy: IEEE, 492−495.
3.1.
2008
Jalakas, T.; Vinnikov, D.; Laugis, J. (2008). Light Load Operation of 6.5 kV 200 A IGBTs in Half-Bridge Configuration. Proceedings of International Symposium on Power Electronics, Electrical Drives, Automation and Motion: International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, Ischia, June 11-13, 2008. Ischia, Italy: IEEE, 1373−1378.
3.1.
2008
Vodovozov, V.; Laugis, J. (2008). Expert System for Electric Drive Design. Proceedings of 13th International Power Electronics and Motion Control Conference EPE-PEMC 2008, CD-ROM: 13th International Power Electronics and Motion Control Conference EPE-PEMC 2008, 1-3 September, 2008, Poznan, Poland. Poznan, Poland: IEEE, 1017−1019.
3.4.
2008
Laugis, J.; Vodovozov, V. (2008). Motor Drive Design in Database Environment. 6th International Conference on Electrical Engineering ICEENG 2008, Paper EE018. Cairo, Egypt,.
3.4.
2008
Laugis, J.; Vodovozov, V. (2008). Educational Collaboration in the Field of Power Electronics and Electromechanics. International Conference on International Education and Science Cooperation IESC 2008. St. Petersburg, Russia: St.Petersburg State Polytechnic University Publishing House, 243−245.
3.4.
2008
Винников, Д.; Лаугис, Ю.; Лехтла, Т.; Егоров, М. (2008). O результатах многолетнего сотрудничества Института Электропривода и Силовой Электроники ТТУ с Таллиннским Трамвайно–Троллейбусным Объединением. International Education and Science Cooperation : Proceedings of the International Conference: International Education and Science Cooperation IESC 2008, St.-Petersburg, 02.06.-06.06.2008. Russia: Издательство "Фаст–Принт", 271−279.
3.4.
2008
Vinnikov, D.; Laugis, J.; Strzelecki, R.; Egorov, M. (2008). 6.5 kV IGBT Switch Realization Possibilities and Their Feasibility Study for High-Power Applications. Proceedings of the 6th International Conference on Electrical Engineering: 6th International Conference on Electrical Engineering ICEENG-6, 27-29 May, 2008, Cairo, Egypt. Ed. Military Technical College, Cairo, Egypt. Cairo, Egypt, 9 pp.
3.4.
2008
Ruban, O.; Laugis, J. (2008). Troubleshooting and Debugging Tools. In: Lahtmets, R. (Ed.). 5th International Symposium "Topical problems in the field of electrical and power engineering" : doctoral school of energy and geotechnology, Kuressaare, Estonia, January 14-19, 2008 (216 −221).. Tallinn University of Technology.
1.2.
2007
Vinnikov, D.; Jalakas, T.; Laugis, J. (2007). Development of 50-kW isolated DC/DC converter with high-voltage IGBTs. Przegląd Elektrotechniczny / Electrical Review, 10, 103−107.
3.1.
2007
Ruban, O.; Laugis, J. (2007). Using Signal Filters in the PID Loops. Proceeding of the 2nd International Conference on Electrical and Control Technologies: 2nd International Conference "Automation and control technologies ECT - 2007", Kaunas (Lithuania), 3-4 May 2007. Toim. Navickas, A.; Sauhats, A.; Virbalis, A.; Ažubalis, V. Kaunas: Kaunas University of Technology, 45 −49.
3.1.
2007
Vinnikov, D.; Laugis, J. (2007). High-Voltage Auxiliary Power Supply with the Simplified Power Circuit Topology for the DC Trains. IEEE Proceedings of the 9th International Conference "Electrical Power Quality and Utilisation" : EPQU’2007: 9th International Conference "Electrical Power Quality and Utilisation", Barcelona (Spain), October 9-11, 2007. IEEE, 1−6.
3.1.
2007
Armas, J.; Laugis, J. (2007). Increase pedestrian safety by critical crossroads: lighting measurements and analysis. 12th European Conference on Power Electronics and Applications EPE 2007, CD-ROM: 12th European Conference on Power Electronics and Applications, 2 - 5 September 2007, Aalborg (Denmark). IEEE, 10 pp.
3.1.
2007
Vodovozov, V.; Laugis, J. (2007). Universities Collaboration in Teaching Power Electronics. 12th European Conference on Power Electronics and Applications EPE 2007, CD-ROM: 12th European Conference on Power Electronics and Applications, 2 - 5 September 2007, Aalborg (Denmark). IEEE, 8 pp.
3.1.
2007
Vodovozov, V.; Laugis, J. (2007). Object-Oriented Electric Drive Development Technology. Proceedings of the International Electric Machines and Drives Conference IEMDC2007. May 3-5 Antalya Turkey, 2: 2007 IEEE International Electric Machines and Drives Conference, May 3-5, Antalya, Turkey. IEEE, 1215−1219.
3.1.
2007
Vinnikov, D.; Laugis, J., Jalakas, T. (2007). Development of Auxiliary Power Supplies for the 3.0 kV DC Rolling Stock. ISIE2007: 2007 IEEE International Symposium on Industrial Electronics. June 4-7, 2007, Vigo (Spain). IEEE, 359−364.
3.1.
2007
Jalakas, T.; Vinnikov, D.; Laugis, J. (2007). Development of 50-kW Isolated DC/DC Converter with High-Voltage IGBTs. 5th International Conference-Workshop on Compatibility in Power Electronics CPE’2007: 5th International Conference-Workshop on Compatibility in Power Electronics CPE’2007, May 29 - June 1, 2007, Gdańsk, Poland. Gdynia: IEEE, 6 pp.
3.2.
2007
Jalakas, T.; Vinnikov, D.; Laugis, J. (2007). Output Rectifier for the High-Voltage High-Frequency Isolated DC/DC Converter. In: Scientific proceedings of Riga Technical University. Power and Electrical Engineering (84−95). . Riga: Riga Technical University.
3.4.
2007
Vinnikov, D.; Laugis, J. (2007). High-Voltage Half-Bridge IGBT Inverter. Proceedings of 16th International Conference „Electrical Drives and Power Electronics EDPE’2007”: 16th International Conference „Electrical Drives and Power Electronics EDPE’2007”. The High Tatras (Slovakia), 24 – 26 September, 2007. , 6 pp.
3.4.
2007
Armas, J.; Laugis, J. (2007). Road Safety by Improved Road Lighting: Road Lighting Measurements and Analysis. In: Lahtmets, R. (_EditorsAbbr). 4th International Symposium "Topical problems of education in the field of electrical and power engineering". Doctoral school of energy and geotechnology : Kuressaare, Estonia, January 15-20, 2007 (83−90).. Tallinn; Kuressaare: Tallinn University of Technology, Faculty of Power Engineering; Elektriajam.
3.4.
2007
Chubarev, K.; Vinnikov, D.; Laugis, J. (2007). Dynamic Positioning System for the Multifunctional Vessel EVA-316. 8th International Workshop on Research and Education in Mechatronics 2007: 8th International Workshop on Research and Education in Mechatronics 2007, REM-2007, Tallinn, Estonia, 14-15 June 2007. Tallinn: Tallinn University of Technology Press, 142−145.
3.4.
2007
Jalakas, T.; Roasto, I.; Müür, M.; Vinnikov, D.; Laugis, J. (2007). Research and Development of Voltage Converters Based on 6.5 kV IGBTs. International Youth Conference on Energetics IYCE-2007, 31.05.-02.06.2007, Budapest, Hungary. , 153−154.
3.4.
2007
Ruban, O.; Laugis, J. (2007). Some Aspects of Closed Control Loop Design. In: Lahtmets, R. (Ed.). 4th International Symposium "Topical problems of education in the field of electrical and power engineering". Doctoral school of energy and geotechnology : Kuressaare, Estonia, January 15-20, 2007 (192−199).. Tallinn: Tallinn University of Technology, Faculty of Power Engineering; Elektriajam.
1.2.
2006
Vinnikov, D.; Laugis, J. (2006). Overcoming EMI Problems in the High-Power High-Frequency DC/DC Converters - a Case Study. Технiчна електродинамiка, 5, 33−37.
3.1.
2006
Lehtla, Madis; Laugis, Juhan (2006). Computer Models for Simulation and Control of a Traction Supply System. 12th International Power Electronics and Motion Control Conference: EPE-PEMC 2006: 12th International Power Electronics and Motion Control Conference, August 30 - September 1, 2006. Portorož, Slovenia: IEEE-Inst Electrical Electronics Engineers Inc, 1372−1377.
3.1.
2006
Rosin, A.; Möller, T.; Laugis, J. (2006). Maintenance Analyses, Control and Supervision System Design of Light Rail – An Application in Estonia. IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics: The 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris - FRANCE, November 7 - 10, 2006. IEE, 1602−1607. DOI: 10.1109/IECON.2006.347343.
3.1.
2006
Galkin, I.; Laugis, J. (2006). Modular Approach to Training Hardware Design for Modular Teaching. EPE-PEMC 2006 : 12th International Power Electronics and Motion Control Conference : Proceedings, CD-ROM: 12th International Power Electronics and Motion Control Conference (EPE/PEMC 2006), Portoroz, Slovenia, August 30 - September 1, 2006. IEEE, 1715−1720.
3.1.
2006
Sokolovs, A.; Galkin, I.; Krievs, O.; Laugis, J. (2006). Simulation Methods for 3x3 Matrix Converter. EPE-PEMC 2006 : 12th International Power Electronics and Motion Control Conference : Proceedings, CD-ROM: 12th International Power Electronics and Motion Control Conference (EPE/PEMC 2006), Portoroz, Slovenia, August 30 - September 1, 2006. IEEE,.
3.4.
2006
Ruban, O.; Laugis, J (2006). PLC and Control Systems. Tarptautines konferencijos Elektros ir vladymos technologijos - 2006 : pranešimu medžiaga = Proceedings of International Conference Electrical and Control Technologies - 2006: International Conference on Electrical and Control Technologies, Kaunas, 4-5 May. Kaunas: Technologija, 504−509.
3.4.
2006
Armas, J.; Laugis, J. (2006). Emergency lighting. In: 3rd International Symposium "Topical problems of education in the field of electrical and power engineering" : doctoral school of energy and geotechnology : Kuressaare, Estonia, January 16-21, 2006 (138−144).. Tallinn : Tallinn University of Technology, Department of Electrical Drives and Power Electronics.
3.4.
2006
Ruban, O.; Laugis, J. (2006). Automatic flow-through control with PI and PID controllers. 3rd International Symposium "Topical problems of education in the field of electrical and power engineering" : doctoral school of energy and geotechnology: 3rd International Symposium "Topical problems of education in the field of electrical and power engineering" . Kuressaare (Estonia), January 16-21, 2006. Ed. Lahtmets, R. Tallinn : Tallinn University of Technology, Department of Electrical Drives and Power Electronics, 106−111.
3.4.
2006
Sokolovs, A.; Galkin, I.; Laugis, J. (2006). Simulation of a simple control strategy for a common 3X3 matrix converter. 3rd International Symposium "Topical problems of education in the field of electrical and power engineering" : doctoral school of energy and geotechnology : Kuressaare, Estonia, January 16-21, 2006. _EditorsAbbr Lahtmets, R. Tallinn : Tallinn University of Technology, Department of Electrical Drives and Power Electronics, 40−44.
6.6.
2006
Laugis, J. (2006). Endel Risthein 80. Elektriala, 8 (3), 22−24.
6.6.
2006
Laugis, J. (2006). Poolsada aastat. Elektriala, 8 (4), 7.
6.6.
2006
Laugis, J.; Risthein, E. (2006). TTÜ elektriajamite- ja jõuenergeetika instituudi arenguteest. Elektriala, 8 (4), 9−12.
1.2.
2005
Lehtla, T.; Laugis, J.; Vinnikov, D. (2005). О нововведениях в учебном процессе в Институте электропривода и силовой электроники Таллиннского Технического Университета. Технiчна електродинамiка, 2, 100−103.
3.1.
2005
Laugis, J.; Lehtla, T. (2005). Comparison of university level study methods and laboratory equipment for teaching of electrical drives. EPE 2005 Dresden : 11th European Conference on Power Electronics and Applications. Proceedings. CD-ROM : 11 - 14 September 2005, Dresden, Germany: European Conference on Power Electronics and Applications, Dresden 11.-14.09.2005. IEEE Press, 8 pp.
3.4.
2005
Galkin, I.; Skarainis, M.; Laugis, J.; Lehtla, T. (2005). Primenenie mikrokontrollera MSR430 v katšestve trenirovotšnoga mikroprotsessornoggo ustroistva. Tehnitšna elektrodinamika. , 90−93.
3.4.
2005
Armas, Jelena; Laugis, Juhan (2005). Tunnel lighting. 2nd International Symposium "Topical Problems of Education in the Field of Electrical and Power Engineering" Kuressaare, Estonia, January 17-22, 2005 (73−79).. Kuressaare, Estonia: TTÜ elektriajamite ja jõuelektroonika instituut.
3.4.
2005
"Kimmer, Thomas;Boiko, Vitali;Laugis, Juhan" (2005). Bestimmung der Parameter des Ersazschaltbildes eines Asynchronmotors für eine feldorientierte Regelung. 2nd International Symposium "Topical Problems of Education in the Field of Electrical and Power Engineering" (98−101).. Kuressaare: Tallinn University of Technology, Faculty of Power Engineering.
3.4.
2005
"Armas, Jelena;Laugis, Juhan" (2005). Tunnel lightning. 2nd International Symposium "Topical Problems of Education in the Field of Electrical and Power Engineering" (73−79).. Kuressaare: TTÜ elektriajamite ja jõuelektroonika instituut.
3.4.
2005
Boiko, V.; Laugis, J. (2005). EMI problems of Current Measurements in Inverters with High Switching Frequency. Compatibility in Power Electronics, 135−137.
1.2.
2004
Vinnikov, D.; Boiko, V.; Lehtla, M.; Rosin, A.; Laugis, J. (2004). Об опыте института электропривода и силовой электроники ТТУ в области модернизации электроподвижного состава Таллиннского трамвайного парка. Технiчна електродинамiка, 3, 52−55.
3.1.
2004
Boiko, Vitali; Laugis, Juhan (2004). A speed measurement method in the model drive with field-oriented control. BEC 2004 : proceedings of the 9th Biennial Baltic Electronics Conference : October 3-6, 2004, Tallinn, Estonia, 337−338.
3.1.
2004
Pettai, E.; Laugis, J.; Lehtla, T.; Joller, J.; Rosin, A. (2004). Distributed Energy Supply System for Electric Vehicles. 6: 11-th International Conference on Power Electronics and Motion Control. EPE-PEMC 2004 Riga. Riga Technical University, 218−221. (Proceedings ).
3.1.
2004
Lehtla, M.; Laugis, J. (2004). Control System for Electric Traction Drive. Proceedings of the 9th Biennial Baltic Electronics Conference: BEC 2004: proceedings of the 9th Biennial Baltic Electronics Conference October 3-6, 2004, Tallinn. Tallinn, 331−332.
3.1.
2004
Boiko, V.; Laugis, J. (2004). Behavior of the Dual-Motor Traction Drives in the Different Operation Modes. 11th International Power Electronics and Motion Control Conference: Riga, Latvia, 2-4 September, 2004. , 6-165−6-168.
3.2.
2004
Boiko, Vitali; Laugis, Juhan (2004). Моделирование динамического ослабления поля асинхронного двигателя. . . Kiiev.
3.4.
2004
Laugis, J.; Lehtla, T.; Pettai, E.; Joller, J.; Rosin, A.; Lehtla, M.; Vinnikov, D. (2004). Modernization of Trams in Estonia. 2: Unconventional Electromechanical and Electrical Systems UEES’04, 24-29. September 2004, Ukraine. Alushta, 561−564.
3.4.
2004
Бойко, В.; Винников, Д.; Лаугис, Ю. (2004). Решение задачи измерения скорости в макете привода с векторным управлением. Proceedings of the International Conference "Automation and Control Technologies - 2004": International Conference "Automation and Control Technologies - 2004". Kaunas (Lithuania), May 13 2004. Kaunas, 43−45.
3.4.
2004
Laugis, J.; Ruban, O. (2004). Профессиональное обучение В Эстонии в области электротехники и автоматики. Proceedings of the International Conference "Automation and Control Technologies ": International Conference "Automation and Control Technologies " Kaunas (Lithuania), May 13, 2004. 38−42.
1.2.
2003
Vinnikov, D.; Boiko, V.; Laugis, J. (2003). Исследование возможностей применения ультраконденсаторов в электросистеме автомобиля. Технiчна електродинамiка, 3, 27−30.
3.4.
2003
Lehtla, M.; Joller, J.; Laugis, J. (2003). Operation and diagnostics of the tram traction drive. Compatibility of Power Electronics CPE2003, Gdansk, Poland 2003. , 61−63, CD.
3.4.
2003
Vinnikov, Dmitri; Boiko, Vitali; Laugis, Juhan (2003). Analysis of possibilities of replacing automotive accumulators for ultracondensers. International conference Conditions and Prospects for Development of Electrical Technology: Ivanovo, Russija: Ivanovo State Institute of Electrical Engineering, 2003.
1.2.
2002
Винников, Д.; Бойко, В.; Лаугис, Ю. (2002). Разработка и исследование статического преобразователя напряжения для трамвая. Техчнiчна Електродинамiка, 1, 3−6.
3.1.
2002
Laugis, J.; Lehtla, T.; Joller, J.; Boiko, V.; Vinnikov, D.; Lehtla, M. (2002). Modernization of electrical transport systems in Estonia. 10-th International POWER ELECTRONICS and MOTION CONTROL Conference EPE-PEMC: 2002, Cavtat & Dubrovnik. Cavtat & Dubrovnik.
3.1.
2002
"Laugis, Juhan;Lehtla, Tõnu" (2002). Mechatronics new study field or new branch of science and engineering. 10th International Power Electronics and Motion Control Conference (PEMC'2002), Cavtat & Dubrovnik. IEE, puudub−puudub.
3.2.
2002
Vinnikov, D.; Lehtla, M.; Joller, J.; Laugis, J. (2002). Research and development of voltage converter for trams. In: Scientific proceedings of Riga Technical University. Power and Electrical Engineering (72−76). . Riga: Riga Technical University.
3.4.
2002
Бойко, B.; Винников, Д.; Лаугис, Ю.; Игнатов, С. (2002). Модернизация установки “Universalprüfmaschine Zwick 1435” на Пярнуской лыжной фабрике. Proceedings of the International Conference "Automation and Control Technologies - 2002": International Conference "Automation and Control Technologies - 2002". Kaunas (Lithuania), May 14 2002. Kaunas: Technologija, 9−11.
3.4.
2001
Лаугис, Ю.; Лехтла, Т.; Йоллер, Ю.; Бойко, В.; Винников, Д.; Лехтла, М. (2001). Состояние и тенденции развития электротранспорта Эстонии. Тезисы докладов. III Международная (XIV Всероссийская) конференция по автоматизированному электроприводу (АЭП-2001): III Международная (XIV Всероссийская) конференция по автоматизированному электроприводу (АЭП-2001). Нижний Новгород, 12-14 сентября 2001. Нижний Новгород, 243−245.
3.1.
2000
Rosin, Argo; Lehtla, Tõnu; Laugis, Juhan (2000). Mechatronics in initial vocational training. The 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference" : BEC 2000 : October 8-11, 2000, conference proceedings (225−228).. Tallinn, Estonia : Tallinn Technical University.
3.1.
2000
Joller, Jüri; Lehtla, Madis; Lehtla, Tõnu; Laugis, Juhan (2000). Tram traction drives and comparison of their control methods. The 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference" : BEC 2000 : October 8-11, 2000, conference proceedings (203−204). . Tallinn, Estonia : Tallinn Technical University.
3.1.
2000
Laugis, Juhan; Vinnikov, Dmitri; Boiko, Vitali (2000). Analysis of drawbacks and reconst[r]uction problems of the R2-type train. The 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference" : BEC 2000 : October 8-11, 2000, conference proceedings (355−358). . Tallinn, Estonia : Tallinn Technical University.
3.1.
2000
Rosin, A.; Laugis, J.; Lehtla, T. (2000). Mechatronics in initial vocational training. The 7th Biennial Conference on Electronics and Microsystem Technology "Baltic Electronics Conference": BEC 2000: October 8-11, 2000, Tallinn, Estonia. Tallinn: Tallinn University of Technology, 225−228.
3.1.
2000
Joller, J.; Lehtla, M.; Lehtla, T.; Laugis, J. (2000). Tram traction drives and comparison of their control methods. proceeding of 7th Biennial Conference on Electronics and Microsystem Technology. BEC’2000 8-11 Oktober, 2000. Tallinn. , 203−204.
3.1.
2000
Lehtla, T.; Joller, J.; Lehtla, M.; Laugis, J. (2000). Parameter Identification and Comparison of an Induction Motor Models. IEE Conference Publication No. 475: 8th International Conference of Power Electronics and Variable Speed Drives, London, 2000. London: IEE, 201−205.
3.4.
2000
Rosin, A.; Laugis, J.; Lehtla, T. (2000). Experimental Sand-filter Systems in Tallinn Water Treatment Plant. 4th international PLCopen conference on Industrial Control Programming, ICP Conference, Utrecht, 10…11 October 2000. , 39−44.
6.3.
2000
Laugis, Juhan (2000). Kuhu areneb elektriajam? Elektriala, 5, 3−3.
3.3.
1999
Jõeveer, M.; Laugis, J.; Risthein, E.; Lehtla, T. (koostajad) (1999). Elektriku kalender 2000. Tallinn: Tallinna Tehnikaülikooli elektriajamite ja jõuelektroonika instituut.
3.4.
1999
Rosin, A.; Laugis, J.; Lehtla, T. (1999). Using of Industry Automation Software and Hardware in Education and Training. 4th International Scientific Colloquium CAx Techniques Bielefeld, 13-15 September, 1999. , 119−124.
3.4.
1999
Rosin, A.; Laugis, J.; Lehtla, T. (1999). Mechatronics - New Profession in Estonia? The Research Symposium of Young Scientists “Actual Problem of Electrical Drives and Industry Automation”, Tallinn, Estonia May 31...June 5, 1999. TTÜ elektriajamite ja jõuelektroonika instituut, 79−81.
3.4.
1999
Boiko, Vitali; Laugis, Juhan (1999). Vibrationsmessgerät auf der Basis von Signalprozessor. Actual problems of electrical drives and industry automation , 71−72.
3.4.
1997
Laugis, Juhan (1997). Research and study process in the Department of Electrical Drives and Power Electronic. Actual problems of electrical drives and industry automation (19−24).. Tallinn: Tallinn Technical University.
3.4.
1997
Laugis, J.; Lehtla, T. (1997). Control of Special Purpose Linear Drives. EPE'97 : 7th European Conference on Power Electronics and Applications, 8-10 September 1997, Trondheim, Norway : proceedings, 3: 7th European Conference on Power Electronics and Applications (EPE’ 97), Trondheim 8-10.09.1997. Brussels: EPE Association, 541−546.
3.4.
1996
Laugis, J.; Lehtla, T. (1996). Linear Induction Motors for Multi Purpose Energy Conversion. Power Electronics and Motion Control Conference PEMC’96: 7th Conference, Exhibition and Tutorials on Power Electronics and Motion Control PEMC' 96, Budapest 02-04.09.1996. 88−92.
3.3.
1994
Laugis, J.; Lehtla, T.; Loigom, V.; Risthein, E.; Tomson, J. (koostajad) (1994). Elektriku kalender 1995. Tallinn: TTÜ elektriajamite ja jõuelektroonika instituut.
6.2.
1994
Laugis, J.; Lehtla, T. (1994). Asünkroonajamite sagedusjuhtimine. Tallinn: Tallinna Tehnikaülikool.
6.2.
1965
Agur, Ustus; Laugis, Juhan (1965). Elektriajamid II osa : laboratoorsete tööde juhendite kogumik. Tallinn: Tallinna Polütehniline Instituut.
6.7.
0
Pettai, E.; Laugis, J.; Lehtla, T.; Joller, J.; Rosin, A. (0). Toiteliiniga seotud sõidukite energiavahetuse juhtimissüsteem. Eesti patent EE200200424 [Control system for the energy exchange of line feed electrical vehicles]. Eest Patent EE200200424. .

Industrial property

25.09.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Uus otsing (Beetaversioon) Lihtotsing Tühjenda
  • Leitud 36 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
MUU510LAS BLRT ERA 10t kandejõuga sildkraana juhtimise moderniseerimine28.02.200525.04.2005Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool5 304,67 EUR
MUU612LAS Elektriraudtee veeremi infosüsteemi väljatöötamine ja rekonstrueerimine28.02.200629.09.2006Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool18 917,85 EUR
MUU649LAS GlamoxHE reklaami avaldamine TTÜ poolt väljaantavas raamatus Valgustehnika I osa23.05.200615.09.2006Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool1 917,35 EUR
MUU156LBalti Laevaremonditehase territooriumi välisvalgustuse mõõtmine19.11.200121.12.2001Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool2 262,47 EUR
MUUF9011Diiselelektriliste manöövervedurite energiavoogude hindamine veoajami energiasäästu ja töökindluse suurendamise eesmärgil01.02.200931.05.2009Dmitri VinnikovTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool19 083,51 EUR
MUU656FElektertranspordi pardaseadmete toitemuundurid06.03.200630.06.2007Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja jõuelektroonika instituut92 032,77 EUR
MUUG4852 (ETF4852)Elektriajamite ja jõupooljuhtmuundurite parameetrite diagnostika talitluse tõhustamiseks ja töökindluse suurendamiseks01.01.200131.12.2003Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool15 338,80 EUR
MUU358LElektriajamite jõumuundurite katsepartii madalapõhjalise keskosaga ja rekonstrueeritud infosüsteemidega trammidele19.08.200331.12.2004Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool108 010,69 EUR
MUU130LElektriraudtee kontaktvõrgu ja veoalajaamade tehnilise seisundi uuring30.09.200130.12.2001Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool12 782,33 EUR
MUU565FElektriraudtee veeremi elektri- ja infosüsteemide renoveerimine01.09.200530.12.2005Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool12 782,33 EUR
MUU245FElektritranspordi veoajamid, automaatika- ja infosüsteemid15.05.200208.03.2004Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Robotitehnika õppetool147 497,22 EUR
MUUV298Elektrotehnika erialade üliõpilaste praktika15.09.200514.09.2006Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool32 205,97 EUR
MUUIN660Elektrotehnilise personali täiendkoolitussüsteemi väljaarendamine01.09.200630.06.2008Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool93 599,25 EUR
MUUIN576Energia ja geotehnika doktorikool01.10.200530.06.2008Aivar AuväärtTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Robotitehnika õppetool395 689,73 EUR
MUUDAR8130Energia ja geotehnika doktorikool II01.12.200831.01.2015Dmitri VinnikovTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Robotitehnika õppetool1 370 791,87 EUR
SFSF0142513s03Energiamuundus- ja -vahetusprotsesside uurimine elektriajamite ja pooljuhtmuundurite jõuvõrkudes01.01.200331.12.2007Juhan LaugisTallinna Tehnikaülikool, Energeetikateaduskond151 598,43 EUR
MUUT222 (0140222s98)Energiasäästlike elektriajamite väljatöötamine ja rakendamine Eesti energeetikas, tööstuses ja transpordis01.09.199730.12.2001Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool27 801,57 EUR
MUULMIN8127Euroopa Komisjoni direktiivi 2005-32-EÜ määruste tõlkekvaliteedi kontrollimine02.12.200831.12.2009Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool3 834,70 EUR
MUULep7029Harjumaa piletimüügisüsteemi lähteülesande koostamine11.04.200730.09.2007Argo RosinTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Robotitehnika õppetool18 853,94 EUR
MUUIN577Interdistsiplinaarse ja rahvusvahelise meeskonna- ja projektipõhise õppe rakendamine elektriajamite ja jõuelektroonika, automaatika ja mehhatroonika valdkonna magistriõppes01.10.200528.02.2008Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool130 320,26 EUR
MUU375LRaamatu Elektriajamid käsikirja koostamine17.11.200331.12.2004Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool12 782,33 EUR
MUU369LRaamatu Tootmise automatiseerimine koostamine ja trükkimine26.09.200331.05.2004Juhan LaugisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Robotitehnika õppetool7 669,40 EUR
MJDMJD42Research and Development of Bi-Directional Power Converters for Energy Storage Applications15.07.200914.07.2012Janis ZakisTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond100 375,74 EUR
SFSF0140009s08Säästev ja jätkusuutlik elektroenergeetika01.01.200831.12.2008Tõnu LehtlaTallinna Tehnikaülikool, Energeetikateaduskond38 346,99 EUR
MUUVA431Taastuvenergiaallikate integreerimine ja energia muundamise efektiivsuse suurendamine mikrovõrkudes01.01.201031.12.2012Dmitri VinnikovTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut, Elektriajamite ja elektrivarustuse õppetool0,06 EUR