Klodian Dhoska

https://www.etis.ee/CV/Klodian_Dhoska/est
25.05.1983
6203211
klodian.dhoska@ttu.ee

Teenistuskäik

Töökohad ja ametid
05.04.2017–...   
Polytechnic University of Tirana, Lektor (1,00)
01.10.2016–...   
Canadian Institute of Technology, Lektor (0,25)
01.10.2016–04.04.2017   
Albanian University, Lektor (1,00)
01.01.2015–01.05.2016   
Physikalisch-Technische Bundesanstalt (PTB), National Metrology Institute of Germany, Physikalisch-Technische Bundesanstalt (PTB), Saksamaa National Metroloogia Instituut, külali teadus (1,00)
01.01.2014–31.12.2015   
Physikalisch-Technische Bundesanstalt (PTB), Saksamaa National Metroloogia Instituut, külali teadus (1.00)
2012–17.06.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Kvaliteeditehnika ja metroloogia õppetool, Nooremteadur (0,20)
01.01.2011–31.12.2012   
Polütehniline Ülikool Tirana, Mehaanikateaduskond, Department of Energy, Lektor (0.30)
01.01.2010–31.12.2012   
Vitrina Ülikooli Tirana, Teaduskonna Ehitus, Mehhatroonikainstituut ja Telekommunikatsioon, Osakonna Juhataja (1.00)
 
 
Haridustee
2008–2010   
Tartu Ülikool, Loodus- ja tehnoloogiateaduskond,
2006–2007   
Tehnikaülikooli Freiberg, Mehaanikateaduskond
2001–2007   
Polütehniline Ülikool Tirana, Mehaanikateaduskond
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2014−...   
Albaania akrediteerimisdirektoraadi, tehniliste kaasistuja
2011−2014   
Albaania akrediteerimisdirektoraadi, tehniliste ekspertide (Mass kalibreerimine, Hindamine määramatuse mõõtmise, sertifitseerimine keskkonnajuhtimissüsteemi)
2007−2008   
Albaania akrediteerimisdirektoraadi, spetsialist arendusosakond

Kvalifikatsioon

Teaduskraadid
Klodian Dhoska, doktorikraad, 2016, (juh) Toomas Kübarsepp, Measurement Methods with 3D Coordinate Measuring Machine and Improved Characterization Setup for Detector Performance (Mõõtemeetodid detektori toimimise iseloomustamiseks 3D-koordinaatmõõtemasina ja arendatud mõõteskeemiga), Tallinna Tehnikaülikool.
Klodian Dhoska, magistrikraad, 2010, (juh) Viktor Vabson; Toomas Kübarsepp; Mart Noorma, Systematic effects in automated mass measurements (Süstemaatilised efektid massi mõõtmisel automaatkomparaatoriga), Tartu Ülikool.
 
 
Teaduspreemiad ja tunnustused
2014, Klodian Dhoska, Kõige aktiivne osaleja 14. Rahvusvaheline sümpoosionil "Topical Problems in the Field of Electrical and Power Engineering", Pärnu, Eesti
 
 
Teadustöö põhisuunad
VALDKOND: 4. Loodusteadused ja tehnika; 4.10. Füüsika; CERCS ERIALA: P180 Metroloogia, instrumentatsioon

Lõppenud projektid

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2019
Pramono, Agus; Dhoska, Klodian; Markja, Irida; Kommel, Lembit (2019). Impact pressure on mechanical properties of aluminum based composite by ECAP-parallel channel. Pollack Periodica, 14 (1), 67−74.10.1556/606.2019.14.1.7.
1.1.
2018
Dhoska, K.; Tola, S.; Pramono, A.; Vozga, I. (2018). Evaluation of measurement uncertainty for determination the mechanical resistance of the brick samples by using uniaxial compressive strength test. International Journal of Metrology and Quality Engineering, 9, 1−8.10.1051/ijmqe/2018012 [ilmumas].
1.2.
2017
Gumeni, K; Dhoska, K. (2017). CCPP Performance Monitoring. European Journal of Scientific Research, 144 (2), 1−6.
1.1.
2016
Dhoska, K.; Hofer, H.; Rodiek, B.; López, M.; Kübarsepp, T., Kück, S. (2016). Improvement of the detection efficiency calibration and homogeneity measurement of Si‑SPAD detectors. SpringerPlus, 5, Article Number: 2065 1.10.1186/s40064-016-3735-7.
1.2.
2016
Dhoska, K; Sinani, U; Dorri, A; Ferrati, D. (2016). Optimization Method for Silicon Based Anti-Reflection Coatings Used on Solar Cells. European Journal of Scientific Research, 140 (3), 273−281.
2.3.
2016
Dhoska, K. (2016). Mõõtemeetodid detektori toimimise iseloomustamiseks 3D-koordinaatmõõtemasina ja arendatud mõõteskeemiga. (Doktoritöö, Tallinn University of Technology). TUT Press.
2.3.
2016
Dhoska, Klodian (2016). Measurement methods with 3D Coordinate Measuring Machine and improved characterization set-up for detector performance. (Doktoritöö, Tallinna Tehnikaülikool). TUT Press.
3.1.
2016
Dhoska, K; Hofer, H; López, M; Rodiek, B; Kübarsepp, T; Kück, S. (2016). Detection efficiency calibration of Si-SPAD detectors via comparison with a Si-Standard diode. Proceedings of the 11th International Conference of DAAAM Baltic "Industrial engineering" :20-22th April 2016 Tallinn, Estonia. Tallinn University of Technology, 110−115.
1.1.
2015
Dhoska, K; Kübarsepp, T; Dorri, A; Pramono, A. (2015). Metrological Overview for Coordinate Measuring Machines. Applied Mechanics and Materials, 771, 195−199.10.4028/www.scientific.net/AMM.771.195.
1.2.
2015
Dhoska, K; Hofer, H; López, M; Kübarsepp, T; Kück, S. (2015). Alignment position method for SPAD detector calibration and homogeneity. International Journal of Scientific Reports, 1, 271−274.10.18203/issn.2454-2156.IntJSciRep20151253.
3.1.
2015
Dhoska, K; Hofer, H; López, M; Rodiek, B; Kübarsepp, T; Kück, S. (2015). High accuracy filter transmission measurement for determination of the detection efficiency calibration of Si-SPAD detector. Proceedings of 10th International Conference of DAAAM Baltic Industrial Engineering, 12-13th May 2015, Tallinn, Estonia. 123−127.
3.1.
2014
Dhoska, K.; Kübarsepp, T.; Hermaste, A. (2014). Uncertainty evaluation of angle measurements by using 3d coordinate measuring machine. Proceedings of 9th International Conference of DAAAM Baltic Industrial Engineering, 24-26th April 2014, Tallinn, Estonia. 221−225.
3.1.
2014
Kübarsepp, T; A. Pokatilov, A; Vabson, V; Dhoska, K; Porrovecchio, G; Götzinger, S; Manninen, A; Kück, S. (2014). High-attenuation tunnel-type detector for calibration of single-photon devices. Proceedings of NEWRAD 2014, The 12th International Conference on New Developments and Applications in Optical Radiometry, Espoo, Finland, 24-27 June 2014, 115−116.
3.1.
2014
Dhoska, K; Vabson, V; Hermaste, A; Kübarsepp, T. (2014). Dimensional Accuracy for Multi-element Photodetector. Proceedings of NEWRAD 2014, The 12th International Conference on New Developments and Applications in Optical Radiometry, Espoo, Finland, 24-27 June 2014, 352.
3.2.
2013
Dhoska, Klodian; Kübarsepp, Toomas. (2013). Metrological Problem Mapping for Coordinate Measuring Machines. 13th International Symposium “TOPICAL PROBLEMS IN THE FIELD OF ELECTRICAL AND POWER ENGINEERING” and, 312−316.
3.1.
2010
Ramaj, Vehbi; Dorri, Altin; Ramaj, Valbone; Dhoska, Klodian; Konjusha, Elmi. (2010). CFD code turbulence models validation for turbulent flows over a wavy surface. Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufa, 425−426.
3.1.
2009
Ramaj, Vehbi; Ramaj, Valbone; Koleci, Abdyl; Dhoska, Klodian; Konjusha, Elmi. (2009). Welding repair of coal mining excavator spoon an other details in Palaj-Kastriot. Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufa, 601−602.
3.4.
2006
Duka, E.; Dhoska, K.; Oettel, H.; Dilo, T. (2006). Creep of a solder alloy Sn-Ag-Cu. “IV International Symposium on Materials Technology “Materialet dhe perdorimi i tyre – Materials a, 99−100.
19.04.2019

Klodian Dhoska

https://www.etis.ee/CV/Klodian_Dhoska/eng
25.05.1983
6203211
klodian.dhoska@ttu.ee
http://

Career

Institution(s) and position(s)
05.04.2017–...   
Polytechnic University of Tirana, Lecturer (1,00)
01.10.2016–...   
Canadian Institute of Technology, Lecturer (0,25)
01.10.2016–04.04.2017   
Albanian University, Lecturer (1,00)
01.01.2015–01.05.2016   
Physikalisch-Technische Bundesanstalt (PTB), National Metrology Institute of Germany, Physikalisch-Technische Bundesanstalt (PTB), National Metrology Institute of Germany, Guest Researcher (1,00)
01.01.2014–31.12.2015   
Physikalisch-Technische Bundesanstalt (PTB), National Metrology Institute of Germany, Guest Researcher (1.00)
2012–17.06.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Mechatronics , Chair of Quality Engineering and Metrology, Junior Researcher (0,20)
01.01.2011–31.12.2012   
Polytechnic University of Tirana, Faculty of Mechanical Engineering, Department of Energy, Lecturer (0.30)
01.01.2010–31.12.2012   
Vitrina University of Tirana, Faculty of Engineering, Department of Mechatronics & Telecommunication, Head of Department (1.00)
 
 
Education
2008–2010   
University of Tartu, Faculty of Science and Technology
2006–2007   
Technical University of Bergakademie Freiberg, Faculty of Mechanical Engineering
2001–2007   
Polytechnic University of Tirana, Faculty of Mechanical Engineering
 
 
R&D related managerial and administrative work
2014−...   
Albanian Accreditation Directorate, Technical Assessor
2011−2014   
Albanian Accreditation Directorate, Technical Expert (Mass Calibration, Evaluation for the measurement of Uncertainty, Certification of Environmental Management System)
2007−2008   
Albanian Accreditation Directorate, Specialist at Development Department

Qualifications

Academic degrees
Klodian Dhoska, Doctor's Degree, 2016, (sup) Toomas Kübarsepp, Measurement Methods with 3D Coordinate Measuring Machine and Improved Characterization Setup for Detector Performance, Tallinn University of Technology.
Klodian Dhoska, Master's Degree, 2010, (sup) Viktor Vabson; Toomas Kübarsepp; Mart Noorma, Systematic effects in automated mass measurements, University of Tartu.
 
 
Honours & awards
2014, Klodian Dhoska, Most active Participend at 14th International Symposium "Topical Problems in the Field of Electrical and Power Engineering", Pärnu, Estonia
 
 
Field of research
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.10. Physics and Technical Physics; CERCS SPECIALITY: P180 Metrology, physical instrumentation
 
 

Completed projects

Publications

Category
Year
Publication
 
1.1.
2019
Pramono, Agus; Dhoska, Klodian; Markja, Irida; Kommel, Lembit (2019). Impact pressure on mechanical properties of aluminum based composite by ECAP-parallel channel. Pollack Periodica, 14 (1), 67−74.10.1556/606.2019.14.1.7.
1.1.
2018
Dhoska, K.; Tola, S.; Pramono, A.; Vozga, I. (2018). Evaluation of measurement uncertainty for determination the mechanical resistance of the brick samples by using uniaxial compressive strength test. International Journal of Metrology and Quality Engineering, 9, 1−8.10.1051/ijmqe/2018012 [forthcoming].
1.2.
2017
Gumeni, K; Dhoska, K. (2017). CCPP Performance Monitoring. European Journal of Scientific Research, 144 (2), 1−6.
1.1.
2016
Dhoska, K.; Hofer, H.; Rodiek, B.; López, M.; Kübarsepp, T., Kück, S. (2016). Improvement of the detection efficiency calibration and homogeneity measurement of Si‑SPAD detectors. SpringerPlus, 5, Article Number: 2065 1.10.1186/s40064-016-3735-7.
1.2.
2016
Dhoska, K; Sinani, U; Dorri, A; Ferrati, D. (2016). Optimization Method for Silicon Based Anti-Reflection Coatings Used on Solar Cells. European Journal of Scientific Research, 140 (3), 273−281.
2.3.
2016
Dhoska, K. (2016). Mõõtemeetodid detektori toimimise iseloomustamiseks 3D-koordinaatmõõtemasina ja arendatud mõõteskeemiga. (Doktoritöö, Tallinn University of Technology). TUT Press.
2.3.
2016
Dhoska, Klodian (2016). Measurement methods with 3D Coordinate Measuring Machine and improved characterization set-up for detector performance. (Doktoritöö, Tallinna Tehnikaülikool). TUT Press.
3.1.
2016
Dhoska, K; Hofer, H; López, M; Rodiek, B; Kübarsepp, T; Kück, S. (2016). Detection efficiency calibration of Si-SPAD detectors via comparison with a Si-Standard diode. Proceedings of the 11th International Conference of DAAAM Baltic "Industrial engineering" :20-22th April 2016 Tallinn, Estonia. Tallinn University of Technology, 110−115.
1.1.
2015
Dhoska, K; Kübarsepp, T; Dorri, A; Pramono, A. (2015). Metrological Overview for Coordinate Measuring Machines. Applied Mechanics and Materials, 771, 195−199.10.4028/www.scientific.net/AMM.771.195.
1.2.
2015
Dhoska, K; Hofer, H; López, M; Kübarsepp, T; Kück, S. (2015). Alignment position method for SPAD detector calibration and homogeneity. International Journal of Scientific Reports, 1, 271−274.10.18203/issn.2454-2156.IntJSciRep20151253.
3.1.
2015
Dhoska, K; Hofer, H; López, M; Rodiek, B; Kübarsepp, T; Kück, S. (2015). High accuracy filter transmission measurement for determination of the detection efficiency calibration of Si-SPAD detector. Proceedings of 10th International Conference of DAAAM Baltic Industrial Engineering, 12-13th May 2015, Tallinn, Estonia. 123−127.
3.1.
2014
Dhoska, K.; Kübarsepp, T.; Hermaste, A. (2014). Uncertainty evaluation of angle measurements by using 3d coordinate measuring machine. Proceedings of 9th International Conference of DAAAM Baltic Industrial Engineering, 24-26th April 2014, Tallinn, Estonia. 221−225.
3.1.
2014
Kübarsepp, T; A. Pokatilov, A; Vabson, V; Dhoska, K; Porrovecchio, G; Götzinger, S; Manninen, A; Kück, S. (2014). High-attenuation tunnel-type detector for calibration of single-photon devices. Proceedings of NEWRAD 2014, The 12th International Conference on New Developments and Applications in Optical Radiometry, Espoo, Finland, 24-27 June 2014, 115−116.
3.1.
2014
Dhoska, K; Vabson, V; Hermaste, A; Kübarsepp, T. (2014). Dimensional Accuracy for Multi-element Photodetector. Proceedings of NEWRAD 2014, The 12th International Conference on New Developments and Applications in Optical Radiometry, Espoo, Finland, 24-27 June 2014, 352.
3.2.
2013
Dhoska, Klodian; Kübarsepp, Toomas. (2013). Metrological Problem Mapping for Coordinate Measuring Machines. 13th International Symposium “TOPICAL PROBLEMS IN THE FIELD OF ELECTRICAL AND POWER ENGINEERING” and, 312−316.
3.1.
2010
Ramaj, Vehbi; Dorri, Altin; Ramaj, Valbone; Dhoska, Klodian; Konjusha, Elmi. (2010). CFD code turbulence models validation for turbulent flows over a wavy surface. Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufa, 425−426.
3.1.
2009
Ramaj, Vehbi; Ramaj, Valbone; Koleci, Abdyl; Dhoska, Klodian; Konjusha, Elmi. (2009). Welding repair of coal mining excavator spoon an other details in Palaj-Kastriot. Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufa, 601−602.
3.4.
2006
Duka, E.; Dhoska, K.; Oettel, H.; Dilo, T. (2006). Creep of a solder alloy Sn-Ag-Cu. “IV International Symposium on Materials Technology “Materialet dhe perdorimi i tyre – Materials a, 99−100.
19.04.2019
Detailne otsing
  • Leitud 3 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
ETFETF7127Elektropihustusionisatsiooni uurimine01.01.200731.12.2010Koit HerodesTartu Ülikool, Füüsika-keemiateaduskond; Tartu Ülikool, Loodus- ja tehnoloogiateaduskond, Tartu Ülikooli Keemia Instituut; Tartu Ülikool, Loodus- ja tehnoloogiateaduskond57 025,04 EUR
MUUVA15046Researcher Mobility Grant (RMG) EXL01-RMG1 Single-photon sources for quantum technologies01.12.201531.05.2016Klodian DhoskaTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Kvaliteeditehnika ja metroloogia õppetool13 876,00 EUR
MUUVA621Uued standardid ja jälgitavus radiomeetrias01.10.201330.09.2016Mart TamreTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Mehhatroonikasüsteemide õppetool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Kvaliteeditehnika ja metroloogia õppetool56 775,50 EUR