See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Marten Madissoo

https://www.etis.ee/CV/Marten_Madissoo/est
2.07.1985
+372 55617070
marten.madissoo@emu.ee

Teenistuskäik

Töökohad ja ametid
2012–...   
Eesti Maaülikool, Tehnikainstituut, Lektor (1,00)
2010–2016   
Eesti Maaülikool, Tehnikainstituut, Doktorant (1,00)
 
 
Haridustee
2010–2016   
Doktorant - Eesti Maaülikool, Tehnikainstituut
01.09.2008–09.06.2010   
Magistriõpe
01.09.2005–13.06.2008   
Bakalaureuseõpe
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2019−...   
Ajakirja Agraarteaduse tehnikateaduse toimetaja
2017−...   
Agria Conference on Innovative Pneumatic Vehicles teadusprogrammi komitee liige

Kvalifikatsioon

Teaduskraadid
Marten Madissoo, doktorikraad, 2016, (juh) Jüri Olt, Surface quality improvement of hard-to-cut materials with modified cutting tool at finishing turning (Modifitseeritud lõikuriga raskesti töödeldavate materjalide pinnakvaliteedi parandamine viimistleval treimisel), Eesti Maaülikool.
Marten Madissoo, magistrikraad, 2010, (juh) Peeter Nõmm, LIUGELAAGRITE KATSESTENDI KONSTRUKTSIOONI PROJEKTLAHENDUS, Eesti Maaülikool.
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.14. Tootmistehnika ja tootmisjuhtimine; CERCS KLASSIFIKAATOR: T130 Tootmistehnoloogia ; TÄPSUSTUS: Materjalide lõiketeooria, Pneumo- ja hüdrosüsteemid

Lõppenud projektid

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
Gailis, M.; Rudzitis, J.; Madissoo, M.; Kreicbergs, J. (2020). Research on energy efficiency of pneumatic cylinder for pneumatic vehicle motor. Agronomy Research, 18, 823−841. DOI: 10.15159/ar.20.048.
3.1.
2019
Polma, Mailis; Leemet, Tõnu; Madissoo, Marten (2019). Study of surface integrity based on milling of material AISI 316L. In: Engineering for Rural Development (858−865).ENGINEERING FOR RURAL DEVELOPMENT, Latvia University of Life Sciences and Technologies Faculty of Engineering, May 22-24, 2019. Jelgava, Latvia: Scimago Journal & Country Rank.10.22616/ERDev2019.18.N498.
3.4.
2018
Madissoo, Marten; Kristjan, Türk (2018). Optimized Valve System for a Pneumatic Motor. Proceedings of the 2nd Agria Conference on Innovative Pneumatic Vehicles: 2nd Agria Conference on Innovative Pneumatic Vehicles, Eger, Hungary, May 11, 2018. Ed. Prof.Dr. László Pokorádi. Ungari: Óbuda University, Institute of Mechatronics and Vehicle Engineering, 5−11.
1.1.
2016
Johansson, D.; Leemet, T.; Allas, J.; Madissoo, M.; Adoberg, E.; Schultheiss, F. (2016). Tool life in stainless steel - influence of varying tool coatings on Colding's tool life equation. Proceedings of the Estonian Academy of Sciences, 65 (2), 172−176. DOI: 10.3176/proc.2016.2.13.
1.1.
2016
Olt, Jüri; Liyvapuu, Alexander; Madissoo, Marten; Maksarov, Viacheslav (2016). Dynamic simulation of chip formation in the process of cutting. International Journal of Materials and Product Technology, 53 (1), 1−14.
1.1.
2015
Madissoo, Marten; Rossner, Argo; Olt, Jüri; Maksarov, Viacheslav (2015). Testing of the External Turning Tool Holder Equipped With Alternate Bars in Its Construction. Materials Science, 21 (3), 391−395. DOI: 10.5755/j01.ms.21.3.7351.
1.1.
2014
Leemet, T.; Allas, J.; Madissoo, M.; Adoberg, E.; Saar, R (2014). Testing a method for evaluating the performance of coatings on end mills in semi-industrial conditions. Agronomy Research, 12 (1), 263−268.
1.2.
2013
Maksarov, V.; Madissoo, M.; Olt, J. (2013). Increasing the Effectiveness of the Cutting Process in the Course of Milling. Journal of Mechanics & Industry Research, 1 (4), 75−81. DOI: 10.12966/jmir.11.02.2013.
3.1.
2012
Madissoo, M.; Maksarov, V.V.; Olt, J. (2012). Increasing the efficiency of external turning by using the multiple layer construction of the cutting tool holder. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering: 8th International Conf. of DAAAM Baltic INDUSTIAL ENGINEERING, 12-21 April 2012 Tallinn. Ed. Otto, T. Tallinna Tehnikaülikooli Kirjastus, 181−186.
3.2.
2012
Madissoo, M.; Maksarov, V.; Arak, M.; Olt, J. (2012). Dynamic Modeling of Metal Turning Elements of Mechanical Processing. In: B. Katalinic (Ed.). DAAAM International Scientific Book (213−224). . Vienna, Austria: DAAAM International Vienna. DOI: 10.2507/daaam.scibook.2012.18.
3.1.
2011
Olt, Jüri; Madissoo, Marten (2011). Dynamic modeling of the cutting process. Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium “Intelligent Manufacturing & Automation: Power of Knowledge and Creativity“: The 22nd International DAAAM Symposium. Vienna, 23-26th November 2011. Ed. B. Katalinic. Vienna, Austria: DAAAM International Vienna, 1203−1204.
3.1.
2011
Olt, J.; Madissoo, M.; Maksarov, V.V. (2011). Dynamic Stabilization of Technological Systems for Processing Edge Cutting Through the Local Metastability. IEEE ISAM 2011: IEEE International Symposium on Assembly and Manuacturing, 25th-27th May 2011, Tampere, Finland. Tampere: IEEE, 6.10.1109/ISAM.2011.5942348.
3.1.
2011
Olt, J.; Mikita, V.; Ilves, R.; Kuut, A.; Madissoo, M. (2011). Impact of ethanol on fuel injection pump of diesel engine. Engineering for Rural Development: 10th International Scientific Conference on Engineering for Rural Development; Jelgava; Latvia; 26 May 2011 through 27 May 2011. 254−259.
28.09.2020

Marten Madissoo

https://www.etis.ee/CV/Marten_Madissoo/eng
2.07.1985
+372 55617070
marten.madissoo@emu.ee
http://

Career

Institutions and positions
2012–...   
Estonian University of Life Sciences, Institute of Technology, lecturer (1,00)
2010–2016   
Estonian University of Life Sciences, Institute of Technology, Phd (1,00)
 
 
Education
2010–2016   
Doktorant - Eesti Maaülikool, Tehnikainstituut
01.09.2008–09.06.2010   
Master's Degree
01.09.2005–13.06.2008   
Bachelor studies
 
 
R&D related managerial and administrative work
2019−...   
Technical Science Editor for the Journal of agricultural science
2017−...   
Agria Conference on Innovative Pneumatic Vehicles, member of scientific program committee

Qualifications

Academic degrees
Marten Madissoo, Doctor's Degree, 2016, (sup) Jüri Olt, Surface quality improvement of hard-to-cut materials with modified cutting tool at finishing turning, Estonian University of Life Sciences.
Marten Madissoo, Master's Degree, 2010, (sup) Peeter Nõmm, LIUGELAAGRITE KATSESTENDI KONSTRUKTSIOONI PROJEKTLAHENDUS (Journal Bearing Apparatus), Estonian University of Life Sciences.
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.14. Industrial Engineering and Management; CERCS CLASSIFICATION: T130 Production technology ; SPECIFICATION: Cutting theory, Pneumatic and hydraulic systems
 
 

Completed projects

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2020
Gailis, M.; Rudzitis, J.; Madissoo, M.; Kreicbergs, J. (2020). Research on energy efficiency of pneumatic cylinder for pneumatic vehicle motor. Agronomy Research, 18, 823−841. DOI: 10.15159/ar.20.048.
3.1.
2019
Polma, Mailis; Leemet, Tõnu; Madissoo, Marten (2019). Study of surface integrity based on milling of material AISI 316L. In: Engineering for Rural Development (858−865).ENGINEERING FOR RURAL DEVELOPMENT, Latvia University of Life Sciences and Technologies Faculty of Engineering, May 22-24, 2019. Jelgava, Latvia: Scimago Journal & Country Rank.10.22616/ERDev2019.18.N498.
3.4.
2018
Madissoo, Marten; Kristjan, Türk (2018). Optimized Valve System for a Pneumatic Motor. Proceedings of the 2nd Agria Conference on Innovative Pneumatic Vehicles: 2nd Agria Conference on Innovative Pneumatic Vehicles, Eger, Hungary, May 11, 2018. Ed. Prof.Dr. László Pokorádi. Ungari: Óbuda University, Institute of Mechatronics and Vehicle Engineering, 5−11.
1.1.
2016
Johansson, D.; Leemet, T.; Allas, J.; Madissoo, M.; Adoberg, E.; Schultheiss, F. (2016). Tool life in stainless steel - influence of varying tool coatings on Colding's tool life equation. Proceedings of the Estonian Academy of Sciences, 65 (2), 172−176. DOI: 10.3176/proc.2016.2.13.
1.1.
2016
Olt, Jüri; Liyvapuu, Alexander; Madissoo, Marten; Maksarov, Viacheslav (2016). Dynamic simulation of chip formation in the process of cutting. International Journal of Materials and Product Technology, 53 (1), 1−14.
1.1.
2015
Madissoo, Marten; Rossner, Argo; Olt, Jüri; Maksarov, Viacheslav (2015). Testing of the External Turning Tool Holder Equipped With Alternate Bars in Its Construction. Materials Science, 21 (3), 391−395. DOI: 10.5755/j01.ms.21.3.7351.
1.1.
2014
Leemet, T.; Allas, J.; Madissoo, M.; Adoberg, E.; Saar, R (2014). Testing a method for evaluating the performance of coatings on end mills in semi-industrial conditions. Agronomy Research, 12 (1), 263−268.
1.2.
2013
Maksarov, V.; Madissoo, M.; Olt, J. (2013). Increasing the Effectiveness of the Cutting Process in the Course of Milling. Journal of Mechanics & Industry Research, 1 (4), 75−81. DOI: 10.12966/jmir.11.02.2013.
3.1.
2012
Madissoo, M.; Maksarov, V.V.; Olt, J. (2012). Increasing the efficiency of external turning by using the multiple layer construction of the cutting tool holder. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering: 8th International Conf. of DAAAM Baltic INDUSTIAL ENGINEERING, 12-21 April 2012 Tallinn. Ed. Otto, T. Tallinna Tehnikaülikooli Kirjastus, 181−186.
3.2.
2012
Madissoo, M.; Maksarov, V.; Arak, M.; Olt, J. (2012). Dynamic Modeling of Metal Turning Elements of Mechanical Processing. In: B. Katalinic (Ed.). DAAAM International Scientific Book (213−224). . Vienna, Austria: DAAAM International Vienna. DOI: 10.2507/daaam.scibook.2012.18.
3.1.
2011
Olt, Jüri; Madissoo, Marten (2011). Dynamic modeling of the cutting process. Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium “Intelligent Manufacturing & Automation: Power of Knowledge and Creativity“: The 22nd International DAAAM Symposium. Vienna, 23-26th November 2011. Ed. B. Katalinic. Vienna, Austria: DAAAM International Vienna, 1203−1204.
3.1.
2011
Olt, J.; Madissoo, M.; Maksarov, V.V. (2011). Dynamic Stabilization of Technological Systems for Processing Edge Cutting Through the Local Metastability. IEEE ISAM 2011: IEEE International Symposium on Assembly and Manuacturing, 25th-27th May 2011, Tampere, Finland. Tampere: IEEE, 6.10.1109/ISAM.2011.5942348.
3.1.
2011
Olt, J.; Mikita, V.; Ilves, R.; Kuut, A.; Madissoo, M. (2011). Impact of ethanol on fuel injection pump of diesel engine. Engineering for Rural Development: 10th International Scientific Conference on Engineering for Rural Development; Jelgava; Latvia; 26 May 2011 through 27 May 2011. 254−259.
28.09.2020

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 4 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
MUU8-2/T12127TEPT (3.2.1101.12-0013)Advanced Thin Hard Coatings in Tooling01.06.201231.12.2014Jüri OltEesti Maaülikool; Eesti Maaülikool, Tehnikainstituut, Põllundus- ja tootmistehnika osakond120 650,00 EUR
MUUAR12134Kõrgtehnoloogiliste õhukeste pinnete rakendamine tööriistade kulumiskindluse tõstmisel.01.09.201230.06.2015Priidu PeetsaluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut855 012,84 EUR
MUU8-2/T13081TIPTPneumojalgratta loomine - insenertehniline projekt13.05.201331.05.2014Tõnu LeemetEesti Maaülikool; Eesti Maaülikool, Tehnikainstituut5 000,00 EUR
1.1.5.2.1.2.8L160080TIPTUniversaalse mehitama traktori prototüübi arendamine15.03.201615.08.2016Tõnu LeemetEesti Maaülikool, Tehnikainstituut28 000,00 EUR