1.08.1985
00372-54525540
prashanth.konda@taltech.ee

Career

Institution(s) and position(s)
21.08.2018–...   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Professor in Additive Manufacturing (1,00)
01.10.2017–...   
Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Guest Scientist (0,20)
01.03.2017–30.09.2018   
Norwegian University of Science and Technology, Associate Professor (1,00)
01.05.2016–28.02.2017   
Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Senior Scientist (1,00)
01.03.2015–30.06.2016   
Sandvik AB, R&D Engineer (1,00)
01.01.2014–28.02.2015   
Leibniz Institute of Solid State and Materials Research (IFW) Dresden, Scientist (1,00)
01.01.2012–31.12.2013   
Leibniz Institute of Solid State and Materials Research (IFW) Dresden, Scientist (1,00)
15.04.2011–31.12.2011   
Leibniz Institute of Solid State and Materials Research (IFW) Dresden, Stipendiat (1,00)
21.08.2008–28.02.2011   
Helmholtz Center Berlin for Materials and Energy (Berlin), Research Scientist (1,00)
01.09.2007–31.05.2008   
Leibniz Institute of Solid State and Materials Research (IFW) Dresden, DAAD Exchange Fellow (1,00)
01.05.2005–30.06.2005   
Indian Institute of Technology Madras (IITM) India, Summer Research Fellow (1,00)
 
 
Education
01.01.2012–31.12.2013   
Doctorate (PhD)
01.06.2006–31.07.2008   
Master of Technology (MTech)
01.06.2002–31.03.2006   
Bachelor of Engineering (B.E.)
 
 
R&D related managerial and administrative work
2019−...   
Materials Design and Processing Communications is a new journal to publish high impact/ground breaking results in the form of communications and has been commissioned from 1st Jan 2019.
2008−...   
Reviewers Assignment for nearly 52 International Peer Reviewed Journals including Acta Materialis, Scripta Materialia, Progress in Material Science, Scientific Reports, etc.
2018−2019   
Guest Editor for the special issue - Additive Manufacturing: Alloy Design and Process Innovations from the Journal: Materials (MDPI Publishers)
2018−2019   
Guest Editor for the special issue - Selective Laser Melting: Materials and Applications from Journal of Manufacturing and Materials Processing (MDPI Publishers)
2011−2016   
DAAD Fellowship Mentor
 
 
Additional career information
Total Number of Publications: 110 Total Number of Citations: 2800 (google scholar) and 2100 (scopus), h-index: 30 (google scholar) and 26 (scopus);

Qualifications

 
 
Honours & awards
2018, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Additive Manufacturing - Elsevier Journal
2018, Prashanth Konda Gokuldoss, Young Scientist Award from ISMANAM 2018 (25th International Symposium on Metastable, Amorphous and Nanostructured Materials 2018) held at Rome, Italy
2017, Prashanth Konda Gokuldoss, IAAM Scientist Medal 2017 (International Association of Advanced Materials Scientist Medal 2017)
2017, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Journal of Alloys and Compounds - Elsevier Journal
2017, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Materials Science and Engineering B - Elsevier Journal
2017, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Journal of Manufacturing Processes - Elsevier Journal
2017, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Corrosion Science - Elsevier Journal
2016, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Journal of Materials Processing Technology - Elsevier Journal
2016, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Materials Letters - Elsevier Journal
2015, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Journal of Alloys and Compounds - Elsevier Journal
2015, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Materials and Design - Elsevier Journal
2011, Prashanth Konda Gokuldoss, Leibniz Fellowship
2007, Prashanth Konda Gokuldoss, DAAD - German Academic Exchange Fellowship to carry out Masters dissertation work in Germany
2005, Prashanth Konda Gokuldoss, Summer Research Fellowship - Indian Institute of Technology Madras
 
 
Field of research
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS SPECIALITY: T150 Material technology ; SPECIALITY: Additive Manufacturing
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS SPECIALITY: T150 Material technology ; SPECIALITY: Powder Metallurgy
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS SPECIALITY: T152 Composite materials
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS SPECIALITY: T450 Metal technology, metallurgy, metal products
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.13. Mechanical Engineering, Automation Technology and Manufacturing Technology; CERCS SPECIALITY: T210 Mechanical engineering, hydraulics, vacuum technology, vibration acoustic engineering
 
 
Additional information
(1) Guest Editor for the special issue - Additive Manufacturing: Alloy Design and Process Innovations from the Journal: Materials (MDPI Publishers)

(2) Guest Editor for the special issue - Selective Laser Melting: Materials and Applications from Journal of Manufacturing and Materials Processing (MDPI Publishers)
(3) Associate Editor for the Wiley journal - Materials Design and Processing Communications

Supervision of postdoctoral researchers

  • 01.06.2016−31.03.2019    Tapabrata Maity  "Deformation mechanisms in severely deformed materials" (Erich Schmid Institute of Materials Science, Austrian Academy of Science, Austria)
  • 01.03.2017−31.03.2019    Niraj Chawake  "Severe plastic deformation of novel alloys" (Erich Schmid Institute of Materials Science, Austrian Academy of Science)
  • 01.09.2018−31.08.2020    Raghu Nandan Ummethala  "Additive Manufacturing of Biomaterials" (Tallinn University of Technology, Tallinn, Estonia)
  • 01.01.2019−31.03.2020    Neera Singh  "Additive manufacturing of composite materials" (Tallinn University of Technology, Tallinn, Estonia)

Publications

Category
Year
Publication
 
1.1.
2020
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
5.2.
2019
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
5.2.
2018
5.2.
2018
5.2.
2018
5.2.
2018
5.2.
2018
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2013
1.1.
2013
1.1.
2013
1.1.
2013
1.1.
2013
1.1.
2012
1.1.
2012
1.1.
2012
1.1.
2012
3.4.
2012
1.1.
2011
1.1.
2010
1.1.
2010
1.1.
2010
1.1.
2010
1.1.
2010
1.1.
2009
1.1.
2009
1.1.
2009
21.10.2019
1.08.1985
00372-54525540
prashanth.konda@taltech.ee

Teenistuskäik

Töökohad ja ametid
21.08.2018–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Professor (1,00)
01.10.2017–...   
Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Külalisteadur (0,20)
01.03.2017–30.09.2018   
Norwegian University of Science and Technology, Dotsent (1,00)
01.05.2016–28.02.2017   
Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Vanemteadur (1,00)
01.03.2015–30.06.2016   
Sandvik AB, Muu (teadustöötaja) (1,00)
01.01.2014–28.02.2015   
Leibniz Institute of Solid State and Materials Research (IFW) Dresden, Teadur (1,00)
01.01.2012–31.12.2013   
Leibniz Institute of Solid State and Materials Research (IFW) Dresden, Nooremteadur (1,00)
15.04.2011–31.12.2011   
Leibniz Institute of Solid State and Materials Research (IFW) Dresden, Muu (õppejõud) (1,00)
21.08.2008–28.02.2011   
Helmholtz Center Berlin for Materials and Energy (Berlin), Nooremteadur (1,00)
01.09.2007–31.05.2008   
Leibniz Institute of Solid State and Materials Research (IFW) Dresden, Külalisteadur (1,00)
01.05.2005–30.06.2005   
Indian Institute of Technology Madras (IITM) India, Nooremteadur (1,00)
 
 
Haridustee
01.01.2012–31.12.2013   
Doctorate (PhD)
01.06.2006–31.07.2008   
Master of Technology (MTech)
01.06.2002–31.03.2006   
Bachelor of Engineering (B.E.)
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2019−...   
Associate Editor - Materials Design and Processing Communications (Wiley Publishers)
2008−...   
Reviewer
2018−2019   
Guest Editor for the special issue - Additive Manufacturing: Alloy Design and Process Innovations from the Journal: Materials (MDPI Publishers)
2018−2019   
Guest Editor for the special issue - Selective Laser Melting: Materials and Applications from Journal of Manufacturing and Materials Processing (MDPI Publishers)
2011−2016   
DAAD Fellowship Mentor
 
 
Teenistuskäigu lisainfo
Total Number of Publications: 110 Total Number of Citations: 2800 (google scholar) and 2100 (scopus), h-index: 30 (google scholar) and 26 (scopus);

Kvalifikatsioon

 
 
Teaduspreemiad ja tunnustused
2018, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Additive Manufacturing - Elsevier Journal
2018, Prashanth Konda Gokuldoss, Young Scientist Award from ISMANAM 2018 (25th International Symposium on Metastable, Amorphous and Nanostructured Materials 2018) held at Rome, Italy
2017, Prashanth Konda Gokuldoss, IAAM Scientist Medal 2017 (International Association of Advanced Materials Scientist Medal 2017)
2017, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Journal of Alloys and Compounds - Elsevier Journal
2017, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Materials Science and Engineering B - Elsevier Journal
2017, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Journal of Manufacturing Processes - Elsevier Journal
2017, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Corrosion Science - Elsevier Journal
2016, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Journal of Materials Processing Technology - Elsevier Journal
2016, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Materials Letters - Elsevier Journal
2015, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Journal of Alloys and Compounds - Elsevier Journal
2015, Prashanth Konda Gokuldoss, Certificate of outstanding contribution in reviewing – Materials and Design - Elsevier Journal
2011, Prashanth Konda Gokuldoss, Leibniz Fellowship
2007, Prashanth Konda Gokuldoss, DAAD - German Academic Exchange Fellowship to carry out Masters dissertation work in Germany
2005, Prashanth Konda Gokuldoss, Summer Research Fellowship - Indian Institute of Technology Madras
 
 
Teadustöö põhisuunad
VALDKOND: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS ERIALA: T150 Materjalitehnoloogia; PÕHISUUND: Additive Manufacturing
VALDKOND: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS ERIALA: T150 Materjalitehnoloogia; PÕHISUUND: Powder Metallurgy
VALDKOND: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS ERIALA: T152 Komposiitmaterjalid
VALDKOND: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS ERIALA: T450 Metallitehnoloogia, metallurgia, metallitooted
VALDKOND: 4. Loodusteadused ja tehnika; 4.13. Mehhanotehnika, automaatika, tööstustehnoloogia; CERCS ERIALA: T210 Masinaehitus, hüdraulika, vaakumtehnoloogia, vibratsioonakustiline tehnoloogia
 
 
Lisainfo
(1) Guest Editor for the special issue - Additive Manufacturing: Alloy Design and Process Innovations from the Journal: Materials (MDPI Publishers)

(2) Guest Editor for the special issue - Selective Laser Melting: Materials and Applications from Journal ofManufacturing and Materials Processing (MDPI Publishers)
(3) Associate Editor for the Wiley journal - Materials Design and Processing Communications

Juhendatud järeldoktorid

  • 01.06.2016−31.03.2019 Tapabrata Maity "Deformation mechanisms in severely deformed materials" Erich Schmid Institute of Materials Science, Austrian Academy of Science, Austria
  • 01.03.2017−31.03.2019 Niraj Chawake "Severe plastic deformation of novel alloys" Erich Schmid Institute of Materials Science, Austrian Academy of Science
  • 01.09.2018−31.08.2020 Raghu Nandan Ummethala "Additive Manufacturing of Biomaterials" Tallinn University of Technology, Tallinn, Estonia
  • 01.01.2019−31.03.2020 Neera Singh "Additive manufacturing of composite materials" Tallinn University of Technology, Tallinn, Estonia

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
1.1.
2019
5.2.
2019
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
1.1.
2018
5.2.
2018
5.2.
2018
5.2.
2018
5.2.
2018
5.2.
2018
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2017
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2016
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2015
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2014
1.1.
2013
1.1.
2013
1.1.
2013
1.1.
2013
1.1.
2013
1.1.
2012
1.1.
2012
1.1.
2012
1.1.
2012
3.4.
2012
1.1.
2011
1.1.
2010
1.1.
2010
1.1.
2010
1.1.
2010
1.1.
2010
1.1.
2009
1.1.
2009
1.1.
2009
21.10.2019
  • Found 123 results
PublicationAuthorsYearSource titleClassificationFileInstitutions
Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix compositesXie, M. S.; Wang, Z.; Zhang, G. Q.; Yang, C.; Zhang, W. W.; Prashanth, K. G.2020Journal of Alloys and Compounds1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin.Kamboj, NK.; Rodriguez, M.A.; Rahmani, R.; Prashanth, K.G.; Hussainova, I. 2019Proceedings of the Estonian Academy of Sciences1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratioKim, J. T.; Hong, S. H.; Kim, S. H.; Park, H. J.; Maity, J.; Chawake, N. M.; Prashanth, K. G.; Park, J. M.; Song, K. K.; WAng, W. M.; Eckert, J.; Kim, K. B.2019Journal of Non-Crystalline Solids1.1.
Design of next-generation alloys for additive manufacturingKonda Gokuldoss, P.2019Material Design & Processing Communications1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steelSokkalingam, R.; Muthupandi, V.; Sivaprasad, K.; Prashanth, K. G.2019Journal of Materials Research1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase compositesHolovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno2019International Journal of Refractory Metals and Hard Materials1.1.Tallinn University of Technology ;
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser meltingXi, L.; Wang, P.; Prashanth, K. G.; Li, H.; Prykhodko, H. V.; Scudino, S.; Kaban, I. 2019Journal of Alloys and Compounds1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium compositesLi, F.X.; Chen, P.; Chen, Z.; Hao, P. D.; Yi, J.H.; Prashanth, K. G.; Eckert, J.2019Journal of Alloys and Compounds1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Friction welding of electron beam melted Ti-6Al-4VQin, P. T.; Damodaram, R.; Maity, T.; Zhang, W. W.; Yang, C.; Wang, Z.; Prashanth, K. G.2019Materials Science and Engineering: A1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser meltingSalman, O. O.; Brenne, F.; Niendorf, T.; Eckert, J.; Prashanth, K. G.; He, T.; Scudino, S.2019Journal of Manufacturing Processes1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant ApplicationsRahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G.2019Applied Sciences1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co–Cr–Fe–Ni–Nb high-entropy compositesMaity, T.; Prashanth, K. G.; Janda, A.; Kim, J. T.; Spieckermann, F.; Eckert, J.2019Journal of Materials Research1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Microstructure and Mechanical Properties of Al–(12-20)Si Bi-Material Fabricated by Selective Laser MeltingZhang, S.; Ma, P.; Jia, Y.; Yu, Z.; Sokkalingam, R.; Shi, X.; Ji, P.; Eckert, J.; Prashanth, K. G.2019Materials1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Quasicrystalline Composites by Additive ManufacturingPrashanth, K. G.; Scudino, S.2019Applied Engineering, Materials and Mechanics III1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phasesWang, Z.; Prashanth, K. G.; Zhang, W. W.; Scudino, S.; Eckert, J.2019Powder Technology1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Selective laser melting of 316L stainless steel: Influence of TiB2 addition on microstructure and mechanical propertiesSalman, O. O.; Gammer, C.; Eckert, J.; Salih, M. Z.; Abdulsalam, E.H; Prashanth, K. G.; Scudino, S.2019Materials Today Communications1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Superior wear resistance in EBM-processed TC4 alloy compared with SLM and forged samplesZhang, W. W.; Qin, P.; Wang, Z.; Yang, C.; Kollo, L.; Grzesiak, D.; Prashanth K. G.2019Materials1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Tribological properties of selective laser melted Al 12Si alloyRathod, H. J.; Nagaraju, T.; Prashanth, K. G.; Ramamurty, U.2019Tribology International1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Tungsten matrix composite reinforced with CoCrFeMnNi high-entropy alloy: Impact of processing routes on microstructure and mechanical propertiesSatyanarayana, P. V.; Sokkalinga, R.; Jena, P. K.; Sivaprasad, K.; Prashanth, K. G.2019Metals1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Work hardening in selective laser melted Al‐12Si alloyKonda Gokuldoss, P.2019Material Design & Processing Communications1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Additive Manufacturing in Industry 4.0 Prashanth, K. G.20195.2.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgyZhang, W. W.; Hu, Y.; Wang, Z.; Yang, C.; Zhang, G. Q.; Prashanth, K. G.; Suryanarayana, C.2018Materials Science and Engineering A1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering
Al2O3-TiC composite prepared by spark plasma sintering process: Evaluation of mechanical and tribological propertiesKumar, R.; Chaubey, A.K.; Prashanth, K.G.; Dhar, A.2018Journal of Materials Engineering and Performance1.1.
Anisotropy in local microstructure – does it affect the tensile properties of SLM samples?Maity, T.; Kim, J.T.; Chawake, N.; Eckert, J.; Prashanth, K.G.2018Manufacturing Letters1.1.
Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressingXi, L. X.; Zhang, H.; Wang, P.; Li, H. C.; Prashanth, K. G.; Lin, K. J.; Kaban, I.; Gu, D. D.2018Ceramics International1.1.Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering