See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Tõnis Teppand

https://www.etis.ee/CV/Tõnis_Teppand/est
7.03.1961
tonis.teppand@emu.ee
Eesti Maaülikool, metsandus- ja maaehitusinstituut, maaehituse ja veemajanduse õppetool; "Metsamaja", kab 1C7, tel 7313184

Teenistuskäik

Töökohad ja ametid
06.09.2018–30.09.2019   
Eesti Maaülikool, Metsandus- ja maaehitusinstituut, Tarindite analüütilise valiku lektor (0,42)
06.09.2018–30.06.2019   
Eesti Maaülikool, metsandus- ja maaehitusinstituut, Maaehituse ja veemajanduse õppetool, Teadur, KIK Projekt 15156 "3D-prinditavast turbakomposiidist täiselutsükliliste haljastus- ja istutusplokkide arendamine" (0,58)
01.01.2008–...   
ARCHITRAV OÜ; juhatuse liige
01.09.2017–05.09.2018   
Eesti Maaülikool, metsandus- ja maaehitusinstituut, Maaehituse ja veemajanduse õppetool, Tarindite analüütilise valiku lektor (0,80)
01.09.2014–31.08.2017   
Eesti Maaülikool, metsandus- ja maaehitusinstituut, maaehituse osakond, tarindite analüütilise valiku lektor (0,80)
01.01.2011–31.08.2014   
Eesti Maaülikool, metsandus- ja maaehitusinstituut, maaehituse osakond, tarindite analüütilise valiku lektor (1,00)
02.08.2010–31.12.2010   
Eesti Maaülikool, metsandus- ja maaehitusinstituut, maaehituse osakond, spetsialist (1,00)
05.01.2009–01.08.2010   
Eesti Maaülikool, metsandus- ja maaehitusinstituut, maaehituse osakond, spetsialist (0,50)
01.01.2007–31.12.2007   
Fermhouse OÜ, ehituskonstruktor-tehnik (lepinguline)
28.04.2005–31.05.2005   
Eesti Maaülikool, metsandus- ja maaehitusinstituut, maaehituse osakond, lepinguline spetsialist (ArchiCAD) (0,30)
01.01.2005–31.12.2008   
Jazztel OÜ, tööde mahu- ja eelarvestaja
01.10.2004–10.11.2004   
Eesti Maaülikool, metsandus- ja maaehitusinstituut, maaehituse osakond, lepinguline spetsialist (ArchiCAD) (0,20)
01.01.2000–31.12.2005   
Spin Tek OÜ, tarkvara arendaja, konsultant-koolitaja, ehitustööde mahu- ja eelarvestaja
01.01.1997–31.12.2008   
FIE Tõnis Teppand, ehituslik projektijuhtimine, projekteerija, tööde mahu- ja eelarvestaja, töödejuhataja
 
 
Haridustee
01.09.2013–...   
Eesti Maaülikool, Doktorikool, Tehnikateadus (80133); doktorant (käimasolev)
01.09.2004–17.06.2010   
Eesti Maaülikool; maaehituse ehitusinseneri õppekava (382), tehnikateaduse magistrikraad (maaehitus) MSc
12.02.1985–01.06.1989   
Eesti NSV Riiklik Kunstiinstituut (ERKI), ülemineku korras TPedI-st; arhitektuur / täna Eesti Kunstiakadeemia (EKA)
01.09.1983–28.01.1985   
E.Vilde nim.Tallinna Pedagoogiline Instituut; joonistamise, joonestamise ja tööõpetuse eriala / täna Tallinna Ülikool
01.09.1980–11.05.1981   
Tallinna Ehitus- ja mehaanikatehnikum (TEMT); arhitektuur / täna Tallinna Tehnikakõrgkool (TTK)
21.08.1979–10.11.1980   
Tallinna Polütehniline Instituut (TPI); maardlate allmaakaevandamise tehnoloogia ja kompleksne mehaniseerimine / täna Tallinna Tehnikaülikool (TTÜ)
01.09.1968–24.06.1979   
Tallinna 44.Keskkool; keskharidus / täna Tallinna Mustamäe Gümnaasium
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2014−...   
Eesti Ehitusinseneride Liit (EEL); täisliige alates 02.09.2014
2015−2019   
COST Action FP1407 "Puidu modifitseerimise mõistmine teadusliku ja keskkonnamõju integreeritud käsitlusviisi kaudu"; juhtkomitee liige
2014−2015   
COST Action FP1004 "Puidu mehaaniliste omaduste parendamine, puidust tööstustooted ja puidust tarindid"; juhtkomitee liige
2014−2017   
COST Action FP1303 “Bioloogilisel toorainel põhinevate ehitusmaterjalide toimimine”; juhtkomitee liige

Kvalifikatsioon

Teaduskraadid
Tõnis Teppand, magistrikraad, 2010, (juh) Jaan Miljan; Matis Miljan, Mitmekihiline tapitud piirdekonstruktsioon, Eesti Maaülikool.
Tõnis Teppand, doktorant, (juh) Alexander Ryabchikov; Jaak Valgur, The methods of modelling translatory shells and the technology of constructing them without substruction and cracks (Translatoorsete ehituskoorikute modelleerimise meetodid ja nende ehitamise tugede- ning pragudevaba tehnoloogia), Eesti Maaülikool.
 
 
Teadustöö põhisuunad
VALDKOND: 4. Loodusteadused ja tehnika; 4.15. Ehitus- ja kommunaaltehnika; CERCS ERIALA: T220 Tsiviilehitus, Hüdrotehnoloogia, avameretehnoloogia, pinnasemehhaanika ; PÕHISUUND: Ehituskoorikud
 
 
Lisainfo
Sihtasutus Kutsekoda.
Volitatud ehitusinsener, tase 8
Alleriala: hoonete ehitus
Ametiala: inseneride koolitamine ja uurimistöö
Kehtib: 28.02.2018-27.02.2023
Kutsetunnistus: 129649

Jooksvad projektid

Lõppenud projektid

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2018
Liiv, Juri; Teppand, Tonis; Rikmann, Ergo; Tenno, Toomas (2018). Novel ecosustainable peat and oil shale ash-based 3D-printable composite material. Sustainable Materials and Technologies , 17, UNSP e00067.10.1016/j.susmat.2018.e00067.
3.4.
2018
Teppand, Tõnis; Kers, Jaan; Liivlaid, Liisi (2018). Wood Modification in Estonia. Wood modification in Europe: processes, products, applications: COST Action FP1407 WG1 and WG4 meeting. _EditorsAbbr Giacomo Goli, Luigi Todaro. Firenze: Universita Degli Studi Firenze - GESAAF, 25−26.
1.2.
2017
Teppand, Tõnis (2017). Long Span Portal Frame Made from Glulam and CLT Mounted Together Using Only Carpentry Joints. PRO LIGNO, 13 (4), 516−519.
3.1.
2017
Teppand, Tõnis (2017). Grass (chapter 3.9). In: Dennis Jones, Christian Brischke (_EditorsAbbr). Performance of Bio-based Building Materials - 1st Edition (150−156). Woodhead Publishing. Elsevier .
3.1.
2017
Teppand, Tõnis (2017). Peat (chapter 3.8). In: Dennis Jones, Christian Brischke (_EditorsAbbr). Performance of Bio-based Building Materials - 1st Edition (142−150). Woodhead Publishing. Elsevier .
3.1.
2017
Teppand,Tõnis; Nurme, Peep; Teppand, Siim (2017). Grid shell designing and construction technology of glue-laminated laths. WIT Transactions on Ecology and the Environment, 226. _EditorsAbbr Brebbia, C.A.; Longhurst, J; Marco, E; Booth, E. Southhampton, Boston: WIT Press, 547−557. (Sustainable Development and Planning; IX).10.2495/SDP170481.
3.4.
2017
Teppand, Tõnis (2017). Using pre-stressed or non-pre-stressed curved members of concentrically composited laminated timber in structures of non-controllable environment. Wood modification research & applications: Third COST Action FP1407 International Conference. Kuchl/Salzburg, Austria. 14.-15.09.2017. _EditorsAbbr Gianluca Tondi, Marko Posavcevic, Andreja Kutnar, Rupert Wimmer. Kuchl, Austria: Salzburg University of Applied Sciences, 62−63.
3.4.
2017
Teppand, Tõnis (2017). Using self-locking carpentry joints in plywood to model dragon skin shell and its strength properties. Building with bio-based materials: best practice and performance specification: Final COST Action FP1303 International Scientific Conference. Zagreb, Horvaatia. 06.-07.09.2017. _EditorsAbbr Vjekoslav Živkovic, Dennis Jones. University of Zagreb, Faculty of Forestry: University of Zagreb, Faculty of Forestry, 42−43.
3.4.
2017
Teppand, Tõnis (2017). LONG SPAN PORTAL FRAME MADE FROM GLULAM AND CLT MOUNTED TOGETHER USING ONLY CARPENTRY JOINTS. Proceedings of International Conference ICWSE 2017 "Wood Science and Engineering in the third Millennium", 11: Wood Science and Engineering in the third Millennium, Brasov, Rumeenia, 2.-4. nov. 2017. _EditorsAbbr Lidia GURAU, Mihaela CAMPEAN, Mihai ISPAS. Brasov, Romania: Transilvania University of Brașov, 631−634.
3.4.
2015
Teppand, Tõnis (2015). Using of peat as insulation material. Properties and Technologies. Performance testing and testing methodologies of non-wood biobased materials : book of abstracts : technical workshop: Performance Testing and Testing Mathodologies of Non-wood Biobased Materials. Tallinn University of Technology, Estonia. 4.-5.03.2015. _EditorsAbbr Dennis Jones, Christian Brischke, Jaan kers, Triinu Poltimäe and Joachim Schmid. SP Technical Research Institute of Sweden: SP Technical Research Institute of Sweden, 86.
3.5.
2015
Humar, M.; Brischke, C.; Meyer, L.; Lesar, B.; Thaler, N.; Jones, D.; Bardage, S.; Belloncle, C.; Van den Bulcke, J.; Abascal, J.M.; Alfredsen, G.; Baisch, D.; Brunnhuber, B.; Cofta, G.; Grodås, E.; Frühwald Hansson, E.; Irle, M.; Kallakas, H.; Kers, J.; Klamer, M. ... Van Acker, J. (2015). Introduction of the COST FP 1303 Cooperative Performance Test.
3.4.
2014
Tõnis Teppand (2014). Technology to use the biomass of meadow plants as thermal insulation material and their thermal properties (lk 92-93). Performance and maintenance of bio-based building materials influencing the life cycle and LCA: COST Action FP1303 Performance of Bio-based building materials. First Conference. Kranjska Gora, Slovenia. 23.-24.10.2014. _EditorsAbbr Andreja Kutnar, Miha Humar, Michael Burnard, Mojca Žlahtic and Dennis Jones. Ljubljana: University of Ljubljana, Biotechnical Faculty. University of Primorska, 95.
6.7.
1994
Uibo Toomas, Teppand Tõnis, Teppand Ennike (1994). Otepää piltkaart. Uibo Toomas (_EditorsAbbr). Otepää piltkaart.. Eesti.

Tööstusomand

2.05.2019

Tõnis Teppand

https://www.etis.ee/CV/Tõnis_Teppand/eng
7.03.1961
tonis.teppand@emu.ee
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Chair of Rural Building and Water Management; "Metsamaja", room 1C7, phone +3727313184

Career

Institution and occupation
06.09.2018–30.09.2019   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Lecturer of Analytical Selection of Building Structures (0,42)
06.09.2018–30.06.2019   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Chair of Rural Building and Water Management, Researcher, KIK Project 15156 "Development of 3D-printable full life cycle landscaping and planting blocks of peat-composite" (0,58)
01.01.2008–...   
ARCHITRAV OÜ; Member of the Board
01.09.2017–05.09.2018   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Chair of Rural Building and Water Management, Lecturer of Analytical Selection of Building Structures (0,80)
01.09.2014–31.08.2017   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Department of Rural Building, Lecturer (0,80)
01.01.2011–31.08.2014   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Department of Rural Building, Lecturer (1,00)
02.08.2010–31.12.2010   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Department of Rural Building, specialist (1,00)
05.01.2009–01.08.2010   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Department of Rural Building, specialist (0,50)
28.04.2005–31.05.2005   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Department of Rural Building, specialist by contract (ArchiCAD) (0,30)
01.10.2004–10.11.2004   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Department of Rural Building, specialist by contract (ArchiCAD) (0,20)
 
 
Education
01.09.2013–...   
Estonian University of Life Sciences, Doctoral School, Technical Science (80133); post-graduate (ongoing)
01.09.2004–17.06.2010   
Estonian University of Life Sciences; Agricultural Building (382), Masters Degree of Technical Science (Agricultural Building) MSc
12.02.1985–01.06.1989   
Estonian SSR Art Institute (ERKI), transition from TPedI; architecture / today Estonian Academy of Arts (EKA)
01.09.1983–28.01.1985   
Tallinn Pedagogical Institute named by E. Vilde; a teacher of drawing, technical drawing and craft / today Tallinn University
01.09.1980–11.05.1981   
Tallinn Technical School for Building and Mechanics (TEMT); architecture / today Tallinn University of Applied Sciences (TTK)
21.08.1979–10.11.1980   
Tallinn Polytechnic Institute (TPI); the technology of mining underground fields and complex machanisation / today Tallinn University of Technology (TTU)
01.09.1968–24.06.1979   
Tallinn 44th Secondary School; secondary education / today Tallinn Mustamäe Secondary School
 
 
R&D related managerial and administrative work
2014−...   
Estonian Association of Civil Engineers (EEL); full member from 02.09.2014
2015−2019   
COST Action FP1407 "Understanding wood modification through an integrated scientific and environmental impact approach (ModWoodLife)"; Member of Management Commitee
2014−2015   
COST Action FP1004 "Enhance mechanical properties of timber, engineered wood products and timber structures"; Member of Management Commitee
2014−2017   
COST Action FP1303 “Performance of bio-based building materials”; Member of Management Commitee

Qualifications

Academic degrees
Tõnis Teppand, Master's Degree, 2010, (sup) Jaan Miljan; Matis Miljan, Mitmekihiline tapitud piirdekonstruktsioon (Multilayer tenoned peripheral structure), Estonian University of Life Sciences.
Tõnis Teppand, Phd student, (sup) Alexander Ryabchikov; Jaak Valgur, The methods of modelling translatory shells and the technology of constructing them without substruction and cracks, Estonian University of Life Sciences.
 
 
Field of research
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.15. Construction and Municipal Engineering; CERCS SPECIALTY: T220 Civil engineering, hydraulic engineering, offshore technology, soil mechanics ; SPECIALITY: Shell structures
 
 
Additional information
Estonian Qualifications Framework
Authorized Civil Engineer, level 8
Subspeciality: construction of buildings
Kind of occupation: educating civil engineers and research
Valid: 28.02.2018-27.02.2023
Certificate: 129649

Projects in progress

Completed projects

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2018
Liiv, Juri; Teppand, Tonis; Rikmann, Ergo; Tenno, Toomas (2018). Novel ecosustainable peat and oil shale ash-based 3D-printable composite material. Sustainable Materials and Technologies , 17, UNSP e00067.10.1016/j.susmat.2018.e00067.
3.4.
2018
Teppand, Tõnis; Kers, Jaan; Liivlaid, Liisi (2018). Wood Modification in Estonia. Wood modification in Europe: processes, products, applications: COST Action FP1407 WG1 and WG4 meeting. _EditorsAbbr Giacomo Goli, Luigi Todaro. Firenze: Universita Degli Studi Firenze - GESAAF, 25−26.
1.2.
2017
Teppand, Tõnis (2017). Long Span Portal Frame Made from Glulam and CLT Mounted Together Using Only Carpentry Joints. PRO LIGNO, 13 (4), 516−519.
3.1.
2017
Teppand, Tõnis (2017). Grass (chapter 3.9). In: Dennis Jones, Christian Brischke (_EditorsAbbr). Performance of Bio-based Building Materials - 1st Edition (150−156). Woodhead Publishing. Elsevier .
3.1.
2017
Teppand, Tõnis (2017). Peat (chapter 3.8). In: Dennis Jones, Christian Brischke (_EditorsAbbr). Performance of Bio-based Building Materials - 1st Edition (142−150). Woodhead Publishing. Elsevier .
3.1.
2017
Teppand,Tõnis; Nurme, Peep; Teppand, Siim (2017). Grid shell designing and construction technology of glue-laminated laths. WIT Transactions on Ecology and the Environment, 226. _EditorsAbbr Brebbia, C.A.; Longhurst, J; Marco, E; Booth, E. Southhampton, Boston: WIT Press, 547−557. (Sustainable Development and Planning; IX).10.2495/SDP170481.
3.4.
2017
Teppand, Tõnis (2017). Using pre-stressed or non-pre-stressed curved members of concentrically composited laminated timber in structures of non-controllable environment. Wood modification research & applications: Third COST Action FP1407 International Conference. Kuchl/Salzburg, Austria. 14.-15.09.2017. _EditorsAbbr Gianluca Tondi, Marko Posavcevic, Andreja Kutnar, Rupert Wimmer. Kuchl, Austria: Salzburg University of Applied Sciences, 62−63.
3.4.
2017
Teppand, Tõnis (2017). Using self-locking carpentry joints in plywood to model dragon skin shell and its strength properties. Building with bio-based materials: best practice and performance specification: Final COST Action FP1303 International Scientific Conference. Zagreb, Horvaatia. 06.-07.09.2017. _EditorsAbbr Vjekoslav Živkovic, Dennis Jones. University of Zagreb, Faculty of Forestry: University of Zagreb, Faculty of Forestry, 42−43.
3.4.
2017
Teppand, Tõnis (2017). LONG SPAN PORTAL FRAME MADE FROM GLULAM AND CLT MOUNTED TOGETHER USING ONLY CARPENTRY JOINTS. Proceedings of International Conference ICWSE 2017 "Wood Science and Engineering in the third Millennium", 11: Wood Science and Engineering in the third Millennium, Brasov, Rumeenia, 2.-4. nov. 2017. _EditorsAbbr Lidia GURAU, Mihaela CAMPEAN, Mihai ISPAS. Brasov, Romania: Transilvania University of Brașov, 631−634.
3.4.
2015
Teppand, Tõnis (2015). Using of peat as insulation material. Properties and Technologies. Performance testing and testing methodologies of non-wood biobased materials : book of abstracts : technical workshop: Performance Testing and Testing Mathodologies of Non-wood Biobased Materials. Tallinn University of Technology, Estonia. 4.-5.03.2015. _EditorsAbbr Dennis Jones, Christian Brischke, Jaan kers, Triinu Poltimäe and Joachim Schmid. SP Technical Research Institute of Sweden: SP Technical Research Institute of Sweden, 86.
3.5.
2015
Humar, M.; Brischke, C.; Meyer, L.; Lesar, B.; Thaler, N.; Jones, D.; Bardage, S.; Belloncle, C.; Van den Bulcke, J.; Abascal, J.M.; Alfredsen, G.; Baisch, D.; Brunnhuber, B.; Cofta, G.; Grodås, E.; Frühwald Hansson, E.; Irle, M.; Kallakas, H.; Kers, J.; Klamer, M. ... Van Acker, J. (2015). Introduction of the COST FP 1303 Cooperative Performance Test.
3.4.
2014
Tõnis Teppand (2014). Technology to use the biomass of meadow plants as thermal insulation material and their thermal properties (lk 92-93). Performance and maintenance of bio-based building materials influencing the life cycle and LCA: COST Action FP1303 Performance of Bio-based building materials. First Conference. Kranjska Gora, Slovenia. 23.-24.10.2014. _EditorsAbbr Andreja Kutnar, Miha Humar, Michael Burnard, Mojca Žlahtic and Dennis Jones. Ljubljana: University of Ljubljana, Biotechnical Faculty. University of Primorska, 95.
6.7.
1994
Uibo Toomas, Teppand Tõnis, Teppand Ennike (1994). Otepää piltkaart. Uibo Toomas (_EditorsAbbr). Otepää piltkaart.. Eesti.

Industrial property

2.05.2019