See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Tanel Aruväli

https://www.etis.ee/CV/Tanel_Aruväli/est
29.08.1982
00372 53765504
tanel.aruvali@taltech.ee
https://pidevareng.ee
AAR-6723-2020

Teenistuskäik

Töökohad ja ametid
2010–2020   
Nordic Plast OÜ, Projektijuht (1,00)
2007–2009   
Laserstuudio OÜ, Projektijuht (1,00)
2004–2006   
Rinaldo Production OÜ, Praktikant, operaator (0,50)
 
 
Haridustee
2013–2013   
Vahetusüliõpilane Saksamaal, Universität des Saarlandes
2009–2015   
PhD, Tallinna Tehnikaülikool, mehaanikateaduskond
2006–2006   
Vahetusüliõpilane Taanis, Syddansk Universitet
2005–2009   
Magistrikraad, Tallinna Tehnikaülikool, mehaanikateaduskond, tootearendus
2001–2005   
Bakalaureusekraad, Tallinna Tehnikaülikool, mehaanikateaduskond, tootearendus
1989–2001   
Jüri Gümnaasium
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2018−...   
Mehaanikavaldkonna inseneridele kutsekvalifikatsioone väljastava kutsekomisjoni liige, Eesti Mehaanikainseneride Liit
2016−...   
Magistritööde kaitsmiskomisjoni liige tootmistehnika erialal, Tallinna Tehnikaülikool
2018−2018   
Doktoritöö kaitsmiskomisjonis osalemine, S. Kaganski “Development and Implementation of the Key Performance Indicator Selection Model for SMEs”, Tallinna Tehnikaülikool
 
 
Loometöö
Osalemine monograafia koostamise interdistsiplinaarses töögrupis "Toote valmistusmoodulite integreerimise ja energiatõhusa juhtimise meetodid".

Kvalifikatsioon

Teaduskraadid
Tanel Aruväli, doktorikraad, 2015, (juh) Tauno Otto, Wireless Real-time Monitoring of Machining Processes (Juhtmevaba reaalajas lõiketöötluse monitooring), Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut.
 
 
Teaduspreemiad ja tunnustused
2013, Tanel Aruväli, BLRT fondi stipendium, Sihtasutus Eesti Rahvuskultuuri Fond
2012, Tanel Aruväli, Festo auhind noorele teadlasele, DAAAM International Vienna
2012, Tanel Aruväli, Parim suuline ettekanne konverentsil 23rd International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Sustainability" artikliga: Monitoring System Framework and Architecture over Supply Chain, DAAAM International Vienna
2010, Tanel Aruväli, Festo auhind noorele teadlasele, DAAAM International Vienna
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.13. Mehhanotehnika, automaatika, tööstustehnoloogia; CERCS KLASSIFIKAATOR: T125 Automatiseerimine, robootika, juhtimistehnika; TÄPSUSTUS: Juhtmevaba reaalajas lõiketöötluse monitooring

Publikatsioonid

Klass
Aasta
Publikatsioon
 
3.1.
2014
Astapov, S.; Riid, A.; Preden, J.; Aruväli, T. (2014). Industrial Process Monitoring by Multi-Channel Acoustic Signal Analysis. Proceedings of the 14th biennial Baltic Electronics Conference: BEC 2014: 14th biennial Baltic Electronics Conference. IEEE, 209−212.
3.1.
2014
Aruväli, Tanel; Maass, Wolfgang; Otto, Tauno (2014). Digital Object Memory Based Monitoring Solutions in Manufacturing Processes. Procedia Engineering, 69, 449−458. DOI: 10.1016/j.proeng.2014.03.011.
3.1.
2014
Serg, R.;Aruväli , T.; Otto, T. (2014). POWER CONSUMPTION BASED ONLINE CONDITION MONITORING IN MILLING MACHINE. Proceedings of the 9th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING", 24-26th April 2014, Tallinn, ESTONIA: 9th International DAAAM Baltic Conference "Industrial Engineering", Tallinn, Estonia, 24-26. April 2014. Ed. Otto, T. Tallinn University of Technology, 193−197.
1.1.
2013
Snatkin, A.; Karjust, K.; Majak, J.; Aruväli, T.; Eiskop, T. (2013). Real time production monitoring system in SME. Estonian Journal of Engineering, 19 (1), 62−75. DOI: 10.3176/eng.2013.1.06.
3.1.
2012
Astapov, S.; Preden, J.-S.; Aruväli, T.; Gordon, B. (2012). Production machinery utilization monitoring based on acoustic and vibration signal analysis. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 1: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. Otto, T. Tallinna Tehnikaülikooli Kirjastus, 268−273.
3.1.
2012
Aruväli, T.; Serg, R.; Otto, T. (2012). Machinery utilization monitoring and pause identification prototype model design. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 1: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. Otto, T. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 256−261.
3.2.
2012
Aruvaeli, T.; Serg, R.; Kaare, K;.Otto, T. (2012). Monitoring System Framework and Architecture over Supply Chain. Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium, 23: 23rd International DAAAM Symposium, Zadar, 2012-10-21/28. Ed. Katalinic, B. Vienna, Austria: DAAAM International Vienna, 661−667.
3.4.
2012
Aruväli, Tanel (2012). Machinery real time monitoring application planning for workshop. Proceeding of the 12th International Symposium "Topical Problems in the Field of Electrical and Power Engineering. Doctoral School of Energy and Geotechnology II": 12th International Symposium "Topical Problems in the Field of Electrical and Power Engineering. Doctoral School of Energy and Geotechnology II", Kuressaare, 11-16.06.2012. Ed. Lehtmets, Rain. Kuressaare: Elektriajam, 142−144.
1.1.
2011
Aruväli, Tanel; Serg, Risto; Preden, Jürgo; Otto, Tauno (2011). In-process determining of the working mode in CNC turning. Estonian Journal of Engineering, 17 (1), 4−16.
3.1.
2011
Aruväli, T.; Reinson, T.; Serg, R. (2011). Real-time Machinery Monitoring Applications in Shop Floor. World Congress on Engineering and Computer Science 2011 Proceedings: International Conference on Intelligent Automation and Robotics 2011, USA, San Francisco, 19-21.10.2011. IAENG , 337−342.
3.2.
2011
Aruväli, Tanel; Otto, Tauno; Serg, Risto (2011). In-process vibration monitoring on CNC lathe. 10th International Symposium "Topical problems in the field of electrical and power engineering": 10th International Symposium "Topical problems in the field of electrical and power engineering", Pärnu, Estonia, January 10-15.2011. Ed. Lahtmets, Rain. Pärnu: Estonian Society of Moritz Hermann Jacobi, 174−178.
3.1.
2010
Aruväli, Tanel; Otto, Tauno; Preden, Jurgo (2010). Modern monitoring opportunities in shopfloor. Annals of DAAAM for 2010 & Proceedings: The 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", Croatia, Zadar, 20-23rd October 2010. Ed. Katalinic, Branco. Vienna, Austria: DAAAM International Vienna, 989−990.
3.1.
2010
Aruväli, T.; Serg, R.; Preden, J.; Otto, T. (2010). Smart dust applications in production environment. Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International DAAAM Baltic Conference "Industrial Engineering", Tallinn, Estonia, 22-24 April 2010. Ed. Küttner, R. Tallinn University of Technology Press.
3.2.
2010
Aruväli, Tanel; Risto, Serg; Tauno, Otto; Jürgo, Preden (2010). Monitoring of manufacturing machinery using smart dust applications. 9th International Symposium "Topical Problems in the Field of Electrical and Power Engineering,"Doctoral School of Energy and Geotechnology II" Proceedings: 9th International Symposium "Topical Problems in the Field of Electrical and Power Engineering", Pärnu, Estonia, 14-19 June 2010. Ed. Rain Lahtmets. Pärnu: Estonian Society of Moritz Hermann Jacobi, 209−213.
19.05.2021

Tanel Aruväli

https://www.etis.ee/CV/Tanel_Aruväli/eng
29.08.1982
00372 53765504
tanel.aruvali@taltech.ee
AAR-6723-2020

Career

Institutions and positions
2010–2020   
Nordic Plast OÜ, Project manager (1,00)
2007–2009   
Laserstuudio OÜ, Project manager (1,00)
2004–2006   
Rinaldo Production OÜ, Trainee, operator (0,50)
 
 
Education
2013–2013   
Exchange student in Germany, Saarland University
2009–2015   
PhD, Tallinn University of Technology, faculty of mechanical engineering
2006–2006   
Exchange student in Denmark University of Southern Denmark
2005–2009   
Master´s degree, Tallinn University of Technology, faculty of mechanical engineering, product development
2001–2005   
Bachelor´s degree, Tallinn University of Technology, faculty of mechanical engineering, product development
 
 
R&D related managerial and administrative work
2018−...   
Assigning of occupational qualifications for Mechanical Engineers in Estonia, Association of Mechanical Engineers of Estonia
2016−...   
Defences of Master’s thesis in study program of Production Engineering, Tallinn University of Technology
2018−2018   
Defence of Doctoral thesis, S. Kaganski “Development and Implementation of the Key Performance Indicator Selection Model for SMEs”, Tallinn University of Technology
 
 
Creative work
Participation in monography writing interdiclipinary work group "Energy-efficient manufacturing control".

Qualifications

Academic degrees
Tanel Aruväli, Doctor's Degree, 2015, (sup) Tauno Otto, Wireless Real-time Monitoring of Machining Processes, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering.
 
 
Honours & awards
2013, Tanel Aruväli, BLRT Fund Scholarship, Estonian National Culture Foundation
2012, Tanel Aruväli, Festo Prize for Young Researchers and Scientists, DAAAM International Vienna
2012, Tanel Aruväli, For best oral presentation presented at the 23rd International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Sustainability" with paper: Monitoring System Framework and Architecture over Supply Chain, DAAAM International Vienna
2010, Tanel Aruväli, Festo Prize for Young Researchers and Scientist, DAAAM International Vienna
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.13. Mechanical Engineering, Automation Technology and Manufacturing Technology; CERCS CLASSIFICATION: T125 Automation, robotics, control engineering ; SPECIFICATION: Wireless Real-time Monitoring of Machining Processes

Publications

Category
Year
Publication
 
3.1.
2014
Astapov, S.; Riid, A.; Preden, J.; Aruväli, T. (2014). Industrial Process Monitoring by Multi-Channel Acoustic Signal Analysis. Proceedings of the 14th biennial Baltic Electronics Conference: BEC 2014: 14th biennial Baltic Electronics Conference. IEEE, 209−212.
3.1.
2014
Aruväli, Tanel; Maass, Wolfgang; Otto, Tauno (2014). Digital Object Memory Based Monitoring Solutions in Manufacturing Processes. Procedia Engineering, 69, 449−458. DOI: 10.1016/j.proeng.2014.03.011.
3.1.
2014
Serg, R.;Aruväli , T.; Otto, T. (2014). POWER CONSUMPTION BASED ONLINE CONDITION MONITORING IN MILLING MACHINE. Proceedings of the 9th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING", 24-26th April 2014, Tallinn, ESTONIA: 9th International DAAAM Baltic Conference "Industrial Engineering", Tallinn, Estonia, 24-26. April 2014. Ed. Otto, T. Tallinn University of Technology, 193−197.
1.1.
2013
Snatkin, A.; Karjust, K.; Majak, J.; Aruväli, T.; Eiskop, T. (2013). Real time production monitoring system in SME. Estonian Journal of Engineering, 19 (1), 62−75. DOI: 10.3176/eng.2013.1.06.
3.1.
2012
Astapov, S.; Preden, J.-S.; Aruväli, T.; Gordon, B. (2012). Production machinery utilization monitoring based on acoustic and vibration signal analysis. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 1: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. Otto, T. Tallinna Tehnikaülikooli Kirjastus, 268−273.
3.1.
2012
Aruväli, T.; Serg, R.; Otto, T. (2012). Machinery utilization monitoring and pause identification prototype model design. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 1: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. Otto, T. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 256−261.
3.2.
2012
Aruvaeli, T.; Serg, R.; Kaare, K;.Otto, T. (2012). Monitoring System Framework and Architecture over Supply Chain. Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium, 23: 23rd International DAAAM Symposium, Zadar, 2012-10-21/28. Ed. Katalinic, B. Vienna, Austria: DAAAM International Vienna, 661−667.
3.4.
2012
Aruväli, Tanel (2012). Machinery real time monitoring application planning for workshop. Proceeding of the 12th International Symposium "Topical Problems in the Field of Electrical and Power Engineering. Doctoral School of Energy and Geotechnology II": 12th International Symposium "Topical Problems in the Field of Electrical and Power Engineering. Doctoral School of Energy and Geotechnology II", Kuressaare, 11-16.06.2012. Ed. Lehtmets, Rain. Kuressaare: Elektriajam, 142−144.
1.1.
2011
Aruväli, Tanel; Serg, Risto; Preden, Jürgo; Otto, Tauno (2011). In-process determining of the working mode in CNC turning. Estonian Journal of Engineering, 17 (1), 4−16.
3.1.
2011
Aruväli, T.; Reinson, T.; Serg, R. (2011). Real-time Machinery Monitoring Applications in Shop Floor. World Congress on Engineering and Computer Science 2011 Proceedings: International Conference on Intelligent Automation and Robotics 2011, USA, San Francisco, 19-21.10.2011. IAENG , 337−342.
3.2.
2011
Aruväli, Tanel; Otto, Tauno; Serg, Risto (2011). In-process vibration monitoring on CNC lathe. 10th International Symposium "Topical problems in the field of electrical and power engineering": 10th International Symposium "Topical problems in the field of electrical and power engineering", Pärnu, Estonia, January 10-15.2011. Ed. Lahtmets, Rain. Pärnu: Estonian Society of Moritz Hermann Jacobi, 174−178.
3.1.
2010
Aruväli, Tanel; Otto, Tauno; Preden, Jurgo (2010). Modern monitoring opportunities in shopfloor. Annals of DAAAM for 2010 & Proceedings: The 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", Croatia, Zadar, 20-23rd October 2010. Ed. Katalinic, Branco. Vienna, Austria: DAAAM International Vienna, 989−990.
3.1.
2010
Aruväli, T.; Serg, R.; Preden, J.; Otto, T. (2010). Smart dust applications in production environment. Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International DAAAM Baltic Conference "Industrial Engineering", Tallinn, Estonia, 22-24 April 2010. Ed. Küttner, R. Tallinn University of Technology Press.
3.2.
2010
Aruväli, Tanel; Risto, Serg; Tauno, Otto; Jürgo, Preden (2010). Monitoring of manufacturing machinery using smart dust applications. 9th International Symposium "Topical Problems in the Field of Electrical and Power Engineering,"Doctoral School of Energy and Geotechnology II" Proceedings: 9th International Symposium "Topical Problems in the Field of Electrical and Power Engineering", Pärnu, Estonia, 14-19 June 2010. Ed. Rain Lahtmets. Pärnu: Estonian Society of Moritz Hermann Jacobi, 209−213.
19.05.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Uus otsing (Beetaversioon) Lihtotsing Tühjenda
  • Leitud 4 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
ETFETF7852E-tootmise kontseptsioon väike- ja keskmisega suurusega ettevõtetele01.01.200931.12.2012Tauno OttoTallinna Tehnikaülikool, Mehaanikateaduskond44 999,60 EUR
MUUVIR478Innovatiivsete regiooniüleste konkurentsivõimet tagavate ärimudelite arendus (INNOREG)01.06.201031.05.2013Tauno OttoTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool164 608,99 EUR
SFSF0140113Bs08Mehhatroonika- ja tootmissüsteemide proaktiivsus ja käitumismudelid01.01.200831.12.2013Mart TamreTallinna Tehnikaülikool, Mehaanikateaduskond413 065,99 EUR
MUUVERT498Teaduspõhise kompetentsi siire (REBASING )01.10.201030.09.2012Tauno OttoTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool12 257,00 EUR