See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Ergo Pikas

https://www.etis.ee/CV/Ergo_Pikas/est
28.02.1987
+37256455953
ergo.pikas@taltech.ee
G-5634-2017
Uurimustöö huvid: kavandamise ja projekteerimise protsessid; kavandamise ja projekteerimise juhtimine; ehitusprotsesside digitaliseerimine; energiatõhusus ja keskkonnasäästlikus; ehtitusjuhtimine

Teenistuskäik

Töökohad ja ametid
04.01.2021–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Ehituse ja arhitektuuri instituut, digitaalehituse professor tenuuri rajal astmel abiprofessor (1,00)
01.01.2017–...   
Plannerly, Nõukogu (0,10)
17.02.2020–30.04.2020   
Tallinna Tehnikaülikool, Inseneriteaduskond, Ehituse ja arhitektuuri instituut, ekspert (0,50)
07.01.2020–28.02.2021   
Aalto Ülikool, Järeldoktor teadur (1,00)
14.02.2018–28.02.2019   
Tallinna Tehnikaülikool, Inseneriteaduskond, Ehituse ja arhitektuuri instituut, ekspert (0,08)
01.12.2017–31.12.2019   
Taani Tehnikaülikool, Teadur/järeldoktor teadur (1,00)
20.08.2016–30.05.2017   
Berkeley Kalifornia Ülikool, Fulbright külalisteadur tudeng (1,00)
03.12.2012–30.06.2016   
Tallinna Tehnikaülikool, Ehitusteaduskond, Ehitustootluse instituut, Ehitusökonoomika ja -juhtimise õppetool, nooremteadur (1,00)
2012–2015   
Majandus- ja Kommunikatsiooniministeerium, Peaspetsialist (0,75)
01.06.2010–30.09.2010   
Tervisehoiu infrastruktuuri uuringute ja innovatsioonikeskus (HACIRIC), Uurimistöö assistent (1,00)
 
 
Haridustee
2013–...   
Tallinna Tehnikaülikool, Infotehnoloogia teaduskond, Tarkvarateaduse instituut, Bakalaureuse äriinfotehnoloogia tudeng
2016–30.05.2017   
Berkeley Ülikool, Insenerikool, Tsiviil- ja keskkonnaehitus osakond, vahetustudeng ja -teadur
2014–18.06.2019   
Aalto Ülikooli, Insenerikool, Tsiviilehitus osakond, ühendatud doktorntuuri doktorant
2014–13.05.2019   
Tallinna Tehnikaülikool, Inseneriteaduskond, Ehituse ja arhitektuuri instituut, ühendatud programmi doktorant
2010–2012   
Iisraeli tehnikainstiuut - Technion, Tsiviil- ja keskkonnaehituse teaduskond, Ehitustehnika ja -juhtimise osakond, tehnikateaduste magister
2006–2010   
Tallinna Tehnikakõrgkool, Ehitusosakond, rakenduskõrgharidus

Kvalifikatsioon

Teaduskraadid
Ergo Pikas, doktorikraad, 2019, (juh) Roode Liias; Jarek Kurnitski; LAURI KOSKELA, Causality and Interpretation: Integrating the Technical and Social Aspects of Design (Põhjuslikkus ja tõlgendamine: projekteerimise tehniliste ja sotsiaalsete aspektide sidumine), Tallinna Tehnikaülikool, Inseneriteaduskond, Ehituse ja arhitektuuri instituut.
Ergo Pikas, magistrikraad (teaduskraad), 2012, (juh) Rafael Sacks, Evaluation of University-level BIM Education in Construction Engineering and Management (Ülikooli BIM hariduse hindamine ehitusjuhtimises ja tootmises), Iisraeli Tehnikainstituut.
 
 
Teaduspreemiad ja tunnustused
2019, Ergo Pikas, Merko Ehitus Eesti noore õppejõu ja teadlase stipendium
2017, Ergo Pikas, MADE, Taani Tootmisakadeemia teadustöö stipendium
2016, Ergo Pikas, Ergo Pikas, USA Fulbright külalisteaduri ja -tudengi programmi stipendium
2015, Ergo Pikas, Ergo Pikas, Riigi Kinnisvara AS doktoriõppe stipendium
2013, Ergo Pikas, Ergo Pikas, TTÜ aasta teadusartikli kaasautor tehnika ja tehnoloogia valdkonnas
2010, Ergo Pikas, Iisraeli Tehnikainstituute - Technioni tsiviilehituse teadusmagistri stipendium
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.15. Ehitus- ja kommunaaltehnika; CERCS KLASSIFIKAATOR: T220 Tsiviilehitus, Hüdrotehnoloogia, avameretehnoloogia, pinnasemehhaanika ; TÄPSUSTUS: Ehitusjuhtimine

Lõppenud projektid

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
3.1.
2021
Ainamo, A.; Pikas, E.; Mikkelä, K. (2021). University ecosystem for student startups: A 'platform of trust' perspective. In: Michael E. Auer; Tiia Rüütmann (Ed.). Educating Engineers for Future Industrial Revolutions. Proceedings of the 23rd International Conference on Interactive Collaborative Learning (ICL2020) (1444−1454). Interactive conference on collaborative learning, Mektory, Tallinn University of Technology, Tallinn, 2-4 September, 2020. Tallinn: Springer. (Advances in Intelligent Systems and Computing; 1329). DOI: 10.1007/978-3-030-68201-9.
1.2.
2020
Sacks, R.; Brilakis, I.; Pikas, E.; Xie, H. S.; Girolami, M. (2020). Construction with digital twin information systems. Data-Centric Engineering, 1, 1−2. DOI: 10.1017/dce.2020.16.
3.1.
2020
Koskela, L.; Broft, R. D.; Pikas, E.; Tezel, A. (2020). Comparing the Methods of A3 and Canvas. Proceedings of the 28th Annual Conference of the International Group for Lean Construction (IGLC): 28th Annual Conference of the International Group for Lean Construction (IGLC). Berkeley Ülikool, 13−24. (Proceedings of the 28th Annual Conference of the International Group for Lean Construction (IGLC)). DOI: 10.24928/2020/0136.
1.1.
2019
Koskela, L.; Ferrantelli, A.; Niiranen, J.; Pikas, E.; Dave, B. (2019). Epistemological Explanation of Lean Construction. Journal of Construction Engineering and Management, 145 (2), #04018131. DOI: 10.1061/(ASCE)CO.1943-7862.0001597.
3.1.
2019
Pikas, E.; Koskela, L.; Oehmen, J.; Dave, B. (2019). From Checklists to Design Process Support Systems: Initial Framing. Proceedings of the 27th Annual Conference of the International Group for Lean Construction (IGLC): 27th Annual Conference of the International Group for Lean Construction, IGLC 2019; Dublin; Ireland; 1 July 2019 -7 July 2019. The International Group for Lean Construction, 83−96. DOI: 10.24928/2019/0173.
3.1.
2019
Koskela, M.; Pikas, E. (2019). Rhetorical Design Game for Expectation Alignment. Proceedings of the International Conference on Engineering Design, ICED, 1: 22nd International Conference on Engineering Design, ICED 2019, Delft; Netherlands; 5 August 2019 - 8 August 2019. Cambridge University Press, 1593−1602. (2019). DOI: 10.1017/dsi.2019.165.
3.1.
2018
Pikas, E.; Koskela, L.; Tredal, N.; Knotten, V.; Bølviken, T. (2018). The dual nature of design management. In: González, V.A. (Ed.). Proceedings of the 26th Annual Conference of the International. Group for Lean Construction (IGLC) (647−657). 26th Annual Conference of the International Group for Lean Construction. The International Group for Lean Construction. DOI: 10.24928/2018/0537.
3.1.
2018
Pikas, E.; Oehmen, J.; Koskela, L.; Thuesen, C. (2018). A new framework for construction project definition stage. In: Marjanović D.; Štorga M.; Škec S.; Bojčetić N.; Pavković N. (Ed.). DS92: Proceedings of the DESIGN 2018 15th International Design Conference (1301−1312). University of Zagreb. DOI: 10.21278/idc.2018.0542.
1.1.
2017
Pikas, E.; Kurnitski, J.; Thalfeldt, M.; Koskela, L. (2017). Cost-benefit analysis of nZEB energy efficiency strategies with on-site photovoltaic generation. Energy, 128, 291−301. DOI: 10.1016/j.energy.2017.03.158.
1.1.
2017
Thalfeldt, M.; Pikas, E.; Kurnitski, J.; Voll, H. (2017). Window model and 5 year price data sensitivity to cost-effective façade solutions for office buildings in Estonia. Energy, 135, 685−697. DOI: 10.1016/j.energy.2017.06.160.
3.1.
2017
Pikas E.; Koskela L.; Seppänen O. (2017). Design Management in a Design Office: Solving the Problem of Relevance. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017 Volume II – Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (547−554). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0315.
3.1.
2017
Pikas E.; Koskela L.; Seppänen O. (2017). Design Management in a Design Office: Development of the Model 'To-Be. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017 Volume II – Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (555−562). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0317.
3.1.
2017
Pikas E.; Koskela L.; Liias R. (2017). Design Management in a Design Office: Development of the Knowledge Base. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017: Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (539−546). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0316.
3.4.
2017
Gomes, D.; Koskela, L. J.; Biotto, C.; Talebi, S.; Pikas, E. (2017). Shared Understanding in Construction: A Conceptual Synthesis. In: 5th Workshop When Social Sciences meet Lean and BIM (1−7). University College Northern Denmark, Aalborg, Denmark: University College Northern Denmark.
3.4.
2017
Koskela L.; Pikas E.; Niiranen J.; Ferrantelli A.; Dave B. (2017). On Epistemology of Construction Engineering and Management. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017 Volume II – Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (169−176). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0336.
3.4.
2017
Uusitalo P.; Olivieri H.; Seppänen O.; Pikas E.; Peltokorpi A. (2017). Review of Lean Design Management: Processes, Methods and Technologies. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017 Volume II – Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (571−578). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0224.
2.5.
2016
Pikas, E.; Liias, R.; Tamme, M. (2016). Exploration Towards the Development of a Concept and Requirements for FMBIM Information Management.
3.1.
2016
Pikas, E.; Koskela, L.; Treldal, N.; Ballard, G.; Liias, R. (2016). Collaboration in Design – Justification, Characteristics and Related Concepts. IGLC 2016 - 24th Annual Conference of the International Group for Lean Construction: 24th Annual Conference of the International Group for Lean Construction, IGLC 2016; Boston; United States; 18 July 2016 through 24 July 2016. Boston, USA: National Pingtung University of Science and Technology, 143−152.
3.1.
2016
Koskela, L.; Pikas, E.; Gomes, D.; Biotto, C.; Talebi, S.; Rahim, N.; Tzortzopoulos, P. (2016). Towards Shared Understanding on Common Ground, Boundary Objects and Other Related Concepts. Collaboration in Design – Justification, Characteristics and Related Concepts. IGLC 2016 - 24th Annual Conference of the International Group for Lean Construction: 24th Annual Conference of the International Group for Lean Construction, IGLC 2016; Boston; United States; 18 July 2016 through 24 July 2016. Boston, USA. National Pingtung University of Science and Technology, 63−72.
3.2.
2016
Pikas, E.; Koskela, L.; Singh, V.; Dave, B.; Liias, R.; Sacks, R. (2016). Application of the Domain Theory to Warehouse Concept Development: A Case Study. In: Proceedings of the CIB World Building Congress 2016: Volume V - Advancing Products and Services. Tampere University of Technology. Department of Civil Engineering (374−385). Tampere University of Technology. (Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics. Report; 18).
1.1.
2015
Pikas, E.; Thalfeldt, M.; Kurnitski, J.; Liias, R. (2015). Extra cost analyses of two apartment buildings for achieving nearly zero and low energy buildings. Energy, 1−10. DOI: 10.1016/j.energy.2015.03.026.
1.1.
2015
Pikas, E.; Kurnitski, J.; Liias, R.; Thalfeldt, M. (2015). Quantification of economic benefits of renovation of apartment buildings as a basis for cost optimal 2030 energy efficiency strategies. Energy and Buildings, 86, 151−160. DOI: 10.1016/j.enbuild.2014.10.004.
3.1.
2015
Pikas, E.; Koskela, L.; Dave, B.; Liias, R. (2015). Case Study on Design Management: Inefficiencies and Possible Remedies. In: Seppänen, O., González, V.A., Arroyo, P. (Ed.). 23rd Annual Conference of the International Group for Lean Construction (547−557). . Perth, Australia: IGLC 23.
3.1.
2015
Dave, B.; Kubler, S.; Pikas, E.; Holmström, J.; Singh, V.; Främling, K.; Koskela, L.; Peltokorp, A. (2015). Intelligent Products: Shifting the Production Control Logic in Construction (With Lean and BIM). In: Seppänen, O.; González, V.A.; Arroyo, P. (Ed.). 23rd Annual Conference of the International Group for Lean Construction (341−350). . Perth, Australia: IGLC 23.
3.1.
2015
Pikas, E.; Koskela, L.; Thalfeldt, M.; Dave, B.; Kurnitski, J. (2015). Complexity in Designing Energy Efficient Buildings: Towards Understanding Decision Networks in Design. In: Seppänen, O., González, V.A., Arroyo, P. (Ed.). 23rd Annual Conference of the International Group for Lean Construction (213−222). . Perth, Australia: IGLC 23.
3.1.
2015
Dave, B.; Pikas, E.; Kerosuo, H.; Mäki, T. (2015). ViBR–Conceptualising a Virtual Big Room through the Framework of People, Processes and Technology. Procedia Economics and Finance, 21: 8th Nordic Conference on Construction Economics and Organization. Elsevier, 586−593. DOI: 10.1016/S2212-5671(15)00216-6.
5.2.
2015
Thalfeldt, M.; Pikas, E.; Kurnitski, J. (2015). Nearly zero and low energy buildings extra cost analyses of apartment buildings. World Sustainable Energy Days, Wels, Austria, 25-27 February 2015.
6.3.
2015
Thalfeldt, M.; Pikas, E.; Kurnitski, J. (2015). Madalenergia büroohoone fassaadi majandusanalüüs. Ehitaja, 22−25.
1.1.
2014
Kurnitski, J.; Kuusk, K.; Tark, T.; Uutar, A.; Kalamees, T.; Pikas, E. (2014). Energy and investment intensity of integrated renovation and 2030 cost optimal savings. Energy and Buildings, 75, 51−59. DOI: 10.1016/j.enbuild.2014.01.044.
1.1.
2014
Pikas, E.; Thalfeldt, M.; Kurnitski, J. (2014). Cost optimal and nearly zero energy building solutions for office buildings. Energy and Buildings, 74, 30−42. DOI: 10.1016/j.enbuild.2014.01.039.
3.1.
2014
Koskela, L.; Howell, G.; Pikas, E.; Dave, B. (2014). If CPM is so bad, why have we been using it so long? In: T. Kalsaas, L. Koskela, T. Abreu Saurin (Ed.). Understanding and Improving Project Based Production (27−37). . Oslo, Norway: Akademika forlag. (22nd Annual Conference of the International Group for Lean Construction).
6.3.
2014
Thalfeldt, M.; Pikas, E.; Kurnitski, J.;Voll, H. (2014). Total economy of windows and facades in low energy office buildings. The REHVA European HVAC Journal, 19−24.
1.1.
2013
Thalfeldt, M.; Pikas, E.; Kurnitski, J.; Voll, H. (2013). Facade design principles for nearly zero energy buildings in a cold climate. Energy and Buildings, 67, 309−321. DOI: 10.1016/j.enbuild.2013.08.027.
1.1.
2013
Pikas, E.; Sacks, R.; Hazzan, O. (2013). Building Information Modeling Education for Construction Engineering and Management: Procedures and Implementation Case Study. Journal of Construction Engineering and Management, 139 (11), 1−20.
1.1.
2013
Sacks, R.; Pikas, E. (2013). Building Information Modeling Education for Construction Engineering and Management: Industry Requirements, State-of-the-Art and Gap Analysis. Journal of Construction Engineering and Management, 1−23.
1.2.
2013
Sacks, R.; Barak, R.; Belaciano, B.; Gurevich, U.; Pikas, E. (2013). KanBIM Lean Construction workflow Management System: Prototype implementation and Field Testing. Lean Construction Journal, 2013, 19−35.
6.3.
2013
Pikas, E. (2013). Timmitud ehituse seminaril kohtus teooria praktikaga. Ehitaja, 20−22.
3.1.
2012
Pikas, E.; Sacks, R.; Priven, V. (2012). Go or No-Go Decisions at the Workface: Uncertainity, Percpetions of Readiness, Making Ready and Making-Do. In: I. D. Tommelein, C. L. Pasquire (Ed.). Are We Near a Tipping Point? (1−10). . San Diego, CA, USA: Montezume Publishing. (Proceedings of IGLC20: 20th Annual Conference of the International Group on Lean Construction).
6.3.
2012
Pikas, Ergo (2012). Muutused ehitusvaldkonnas sünnivad hariduse kaudu. Ehitaja, 20−22.
3.1.
2011
Sacks, R.; Pikas, E. (2011). Crusell Bridge - A Building Model Supports a Wide Variety of Information, Uses of BIM in the Construction Stage. In: BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors (494−513). . Wiley-Blackwell.
3.4.
2011
Pikas, E.; Koskela, L.; Sapountzis, S.; Dave, B.; Owen, R. (2011). Overview of Building Information Modelling in Healtcare Projects. In: J. Barlow, J. O'Sullivan, B. Trimcev (Ed.). HaCIRIC 11 Conference proceedings (286−297). . HaCIRIC, Imperial College, Tanaka Business School.
6.3.
2010
Pikas, E. (2010). Ehitusinfo modelleerimisest võidab kõige enam klient. Ehitaja, 28−29.
6.3.
2010
Pikas, Ergo (2010). Timmitud ehituse ellurakendamine lubab põhimõttelisi muutusi ehitusvaldkonnas. Ehitaja, 20−21.
15.04.2021

Ergo Pikas

https://www.etis.ee/CV/Ergo_Pikas/eng
28.02.1987
+37256455953
ergo.pikas@taltech.ee
G-5634-2017
Research interests: design and engineering processes; design management; digitalization of construction processes; energy efficiency and sustainability of buildings; construction management

Career

Institutions and positions
04.01.2021–...   
Tallinn University of Technology , School of Engineering, Department of Civil Engineering and Architecture, Professor (1,00)
01.01.2017–...   
Plannerly Ltd, Advisory Board (0,10)
17.02.2020–30.04.2020   
Tallinn University of Technology , School of Engineering, Department of Civil Engineering and Architecture, Expert (0,50)
07.01.2020–28.02.2021   
Aalto University, Postdoctoral researcher (1,00)
14.02.2018–28.02.2019   
Tallinn University of Technology , School of Engineering, Department of Civil Engineering and Architecture, Expert (0,08)
01.12.2017–31.12.2019   
Technical University of Denmark, Researcher/Postdoctoral researcher (1,00)
20.08.2016–30.05.2017   
University of California, Berkeley, Fulbright Visiting Student Researcher (1,00)
03.12.2012–30.06.2016   
Tallinn University of Technology , Faculty of Civil Engineering, Department of Building Production, Chair of Construction Economics and Management, Junior Researcher (1,00)
2012–2015   
Ministry of Economic Affairs and Communications, Executive officer (0,75)
01.06.2010–30.09.2010   
Health and Care Infrastructure Research and Innovation Centre (HACIRIC), Research Assistant (1,00)
 
 
Education
2013–...   
Tallinn University of Technology, School of Information Technologies, Department of Software Science, BSc in Business Information Systems
2016–30.05.2017   
University of California, School of Engineering, Civil and Environmental Engineering Department, Visiting Student Researcher
2014–18.06.2019   
Aalto University, School of Engineering, Department of Civil Engineering, Joint-PhD Program Doctoral Student
2014–13.05.2019   
Tallinn University of Technology, School of Engineering, Department of Civil Engineering and Architecture, Doctoral Student in Joint-PhD Program
2010–2012   
Israel Institute of Technology - Technion, Faculty of Civil and Environmental Engineering, The Division of Structural Engineering and Construction Management, MSc in Civil Engineering
2006–2010   
TTK University of Applied Sciences, Building Department, B.ASc

Qualifications

Academic degrees
Ergo Pikas, Doctor's Degree, 2019, (sup) Roode Liias; Jarek Kurnitski; LAURI KOSKELA, Causality and Interpretation: Integrating the Technical and Social Aspects of Design, Tallinn University of Technology School of Engineering, Department of Civil Engineering and Architecture.
Ergo Pikas, Research Master's Degree, 2012, (sup) Rafael Sacks, Evaluation of University-level BIM Education in Construction Engineering and Management, Israel Institute of Technology.
 
 
Honours & awards
2019, Ergo Pikas, Merko Ehitus Estonia Scholarship to Young Lecturer/Researcher
2017, Ergo Pikas, MADE - Manufacturing Academy of Denmark Research Scholarship
2016, Ergo Pikas, Ergo Pikas, USA Fulbright Visiting Student Researcher Scholar
2015, Ergo Pikas, Ergo Pikas, Estonian Real Estate Agency scholarship for doctoral studies
2013, Ergo Pikas, 2013, Ergo Pikas, Tallinn University of Technology scientific paper of the year co-author of in the field of engineering and technology
2010, Ergo Pikas, Israel Institute of Technology – Technion Scholarship for Master of Science Studies in Civil Engineering
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.15. Construction and Municipal Engineering; CERCS CLASSIFICATION: T220 Civil engineering, hydraulic engineering, offshore technology, soil mechanics ; SPECIFICATION: Construction Management
 
 

Completed projects

Supervised dissertations

Publications

Category
Year
Publication
 
3.1.
2021
Ainamo, A.; Pikas, E.; Mikkelä, K. (2021). University ecosystem for student startups: A 'platform of trust' perspective. In: Michael E. Auer; Tiia Rüütmann (Ed.). Educating Engineers for Future Industrial Revolutions. Proceedings of the 23rd International Conference on Interactive Collaborative Learning (ICL2020) (1444−1454). Interactive conference on collaborative learning, Mektory, Tallinn University of Technology, Tallinn, 2-4 September, 2020. Tallinn: Springer. (Advances in Intelligent Systems and Computing; 1329). DOI: 10.1007/978-3-030-68201-9.
1.2.
2020
Sacks, R.; Brilakis, I.; Pikas, E.; Xie, H. S.; Girolami, M. (2020). Construction with digital twin information systems. Data-Centric Engineering, 1, 1−2. DOI: 10.1017/dce.2020.16.
3.1.
2020
Koskela, L.; Broft, R. D.; Pikas, E.; Tezel, A. (2020). Comparing the Methods of A3 and Canvas. Proceedings of the 28th Annual Conference of the International Group for Lean Construction (IGLC): 28th Annual Conference of the International Group for Lean Construction (IGLC). Berkeley Ülikool, 13−24. (Proceedings of the 28th Annual Conference of the International Group for Lean Construction (IGLC)). DOI: 10.24928/2020/0136.
1.1.
2019
Koskela, L.; Ferrantelli, A.; Niiranen, J.; Pikas, E.; Dave, B. (2019). Epistemological Explanation of Lean Construction. Journal of Construction Engineering and Management, 145 (2), #04018131. DOI: 10.1061/(ASCE)CO.1943-7862.0001597.
3.1.
2019
Pikas, E.; Koskela, L.; Oehmen, J.; Dave, B. (2019). From Checklists to Design Process Support Systems: Initial Framing. Proceedings of the 27th Annual Conference of the International Group for Lean Construction (IGLC): 27th Annual Conference of the International Group for Lean Construction, IGLC 2019; Dublin; Ireland; 1 July 2019 -7 July 2019. The International Group for Lean Construction, 83−96. DOI: 10.24928/2019/0173.
3.1.
2019
Koskela, M.; Pikas, E. (2019). Rhetorical Design Game for Expectation Alignment. Proceedings of the International Conference on Engineering Design, ICED, 1: 22nd International Conference on Engineering Design, ICED 2019, Delft; Netherlands; 5 August 2019 - 8 August 2019. Cambridge University Press, 1593−1602. (2019). DOI: 10.1017/dsi.2019.165.
3.1.
2018
Pikas, E.; Koskela, L.; Tredal, N.; Knotten, V.; Bølviken, T. (2018). The dual nature of design management. In: González, V.A. (Ed.). Proceedings of the 26th Annual Conference of the International. Group for Lean Construction (IGLC) (647−657). 26th Annual Conference of the International Group for Lean Construction. The International Group for Lean Construction. DOI: 10.24928/2018/0537.
3.1.
2018
Pikas, E.; Oehmen, J.; Koskela, L.; Thuesen, C. (2018). A new framework for construction project definition stage. In: Marjanović D.; Štorga M.; Škec S.; Bojčetić N.; Pavković N. (Ed.). DS92: Proceedings of the DESIGN 2018 15th International Design Conference (1301−1312). University of Zagreb. DOI: 10.21278/idc.2018.0542.
1.1.
2017
Pikas, E.; Kurnitski, J.; Thalfeldt, M.; Koskela, L. (2017). Cost-benefit analysis of nZEB energy efficiency strategies with on-site photovoltaic generation. Energy, 128, 291−301. DOI: 10.1016/j.energy.2017.03.158.
1.1.
2017
Thalfeldt, M.; Pikas, E.; Kurnitski, J.; Voll, H. (2017). Window model and 5 year price data sensitivity to cost-effective façade solutions for office buildings in Estonia. Energy, 135, 685−697. DOI: 10.1016/j.energy.2017.06.160.
3.1.
2017
Pikas E.; Koskela L.; Seppänen O. (2017). Design Management in a Design Office: Solving the Problem of Relevance. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017 Volume II – Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (547−554). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0315.
3.1.
2017
Pikas E.; Koskela L.; Seppänen O. (2017). Design Management in a Design Office: Development of the Model 'To-Be. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017 Volume II – Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (555−562). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0317.
3.1.
2017
Pikas E.; Koskela L.; Liias R. (2017). Design Management in a Design Office: Development of the Knowledge Base. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017: Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (539−546). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0316.
3.4.
2017
Gomes, D.; Koskela, L. J.; Biotto, C.; Talebi, S.; Pikas, E. (2017). Shared Understanding in Construction: A Conceptual Synthesis. In: 5th Workshop When Social Sciences meet Lean and BIM (1−7). University College Northern Denmark, Aalborg, Denmark: University College Northern Denmark.
3.4.
2017
Koskela L.; Pikas E.; Niiranen J.; Ferrantelli A.; Dave B. (2017). On Epistemology of Construction Engineering and Management. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017 Volume II – Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (169−176). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0336.
3.4.
2017
Uusitalo P.; Olivieri H.; Seppänen O.; Pikas E.; Peltokorpi A. (2017). Review of Lean Design Management: Processes, Methods and Technologies. In: Walsh, K., Sacks, R., Brilakis, I. (Ed.). LC3 2017 Volume II – Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC) (571−578). Heraklion, Greece: Kenneth Walsh. DOI: 10.24928/2017/0224.
2.5.
2016
Pikas, E.; Liias, R.; Tamme, M. (2016). Exploration Towards the Development of a Concept and Requirements for FMBIM Information Management.
3.1.
2016
Pikas, E.; Koskela, L.; Treldal, N.; Ballard, G.; Liias, R. (2016). Collaboration in Design – Justification, Characteristics and Related Concepts. IGLC 2016 - 24th Annual Conference of the International Group for Lean Construction: 24th Annual Conference of the International Group for Lean Construction, IGLC 2016; Boston; United States; 18 July 2016 through 24 July 2016. Boston, USA: National Pingtung University of Science and Technology, 143−152.
3.1.
2016
Koskela, L.; Pikas, E.; Gomes, D.; Biotto, C.; Talebi, S.; Rahim, N.; Tzortzopoulos, P. (2016). Towards Shared Understanding on Common Ground, Boundary Objects and Other Related Concepts. Collaboration in Design – Justification, Characteristics and Related Concepts. IGLC 2016 - 24th Annual Conference of the International Group for Lean Construction: 24th Annual Conference of the International Group for Lean Construction, IGLC 2016; Boston; United States; 18 July 2016 through 24 July 2016. Boston, USA. National Pingtung University of Science and Technology, 63−72.
3.2.
2016
Pikas, E.; Koskela, L.; Singh, V.; Dave, B.; Liias, R.; Sacks, R. (2016). Application of the Domain Theory to Warehouse Concept Development: A Case Study. In: Proceedings of the CIB World Building Congress 2016: Volume V - Advancing Products and Services. Tampere University of Technology. Department of Civil Engineering (374−385). Tampere University of Technology. (Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics. Report; 18).
1.1.
2015
Pikas, E.; Thalfeldt, M.; Kurnitski, J.; Liias, R. (2015). Extra cost analyses of two apartment buildings for achieving nearly zero and low energy buildings. Energy, 1−10. DOI: 10.1016/j.energy.2015.03.026.
1.1.
2015
Pikas, E.; Kurnitski, J.; Liias, R.; Thalfeldt, M. (2015). Quantification of economic benefits of renovation of apartment buildings as a basis for cost optimal 2030 energy efficiency strategies. Energy and Buildings, 86, 151−160. DOI: 10.1016/j.enbuild.2014.10.004.
3.1.
2015
Pikas, E.; Koskela, L.; Dave, B.; Liias, R. (2015). Case Study on Design Management: Inefficiencies and Possible Remedies. In: Seppänen, O., González, V.A., Arroyo, P. (Ed.). 23rd Annual Conference of the International Group for Lean Construction (547−557). . Perth, Australia: IGLC 23.
3.1.
2015
Dave, B.; Kubler, S.; Pikas, E.; Holmström, J.; Singh, V.; Främling, K.; Koskela, L.; Peltokorp, A. (2015). Intelligent Products: Shifting the Production Control Logic in Construction (With Lean and BIM). In: Seppänen, O.; González, V.A.; Arroyo, P. (Ed.). 23rd Annual Conference of the International Group for Lean Construction (341−350). . Perth, Australia: IGLC 23.
3.1.
2015
Pikas, E.; Koskela, L.; Thalfeldt, M.; Dave, B.; Kurnitski, J. (2015). Complexity in Designing Energy Efficient Buildings: Towards Understanding Decision Networks in Design. In: Seppänen, O., González, V.A., Arroyo, P. (Ed.). 23rd Annual Conference of the International Group for Lean Construction (213−222). . Perth, Australia: IGLC 23.
3.1.
2015
Dave, B.; Pikas, E.; Kerosuo, H.; Mäki, T. (2015). ViBR–Conceptualising a Virtual Big Room through the Framework of People, Processes and Technology. Procedia Economics and Finance, 21: 8th Nordic Conference on Construction Economics and Organization. Elsevier, 586−593. DOI: 10.1016/S2212-5671(15)00216-6.
5.2.
2015
Thalfeldt, M.; Pikas, E.; Kurnitski, J. (2015). Nearly zero and low energy buildings extra cost analyses of apartment buildings. World Sustainable Energy Days, Wels, Austria, 25-27 February 2015.
6.3.
2015
Thalfeldt, M.; Pikas, E.; Kurnitski, J. (2015). Madalenergia büroohoone fassaadi majandusanalüüs. Ehitaja, 22−25.
1.1.
2014
Kurnitski, J.; Kuusk, K.; Tark, T.; Uutar, A.; Kalamees, T.; Pikas, E. (2014). Energy and investment intensity of integrated renovation and 2030 cost optimal savings. Energy and Buildings, 75, 51−59. DOI: 10.1016/j.enbuild.2014.01.044.
1.1.
2014
Pikas, E.; Thalfeldt, M.; Kurnitski, J. (2014). Cost optimal and nearly zero energy building solutions for office buildings. Energy and Buildings, 74, 30−42. DOI: 10.1016/j.enbuild.2014.01.039.
3.1.
2014
Koskela, L.; Howell, G.; Pikas, E.; Dave, B. (2014). If CPM is so bad, why have we been using it so long? In: T. Kalsaas, L. Koskela, T. Abreu Saurin (Ed.). Understanding and Improving Project Based Production (27−37). . Oslo, Norway: Akademika forlag. (22nd Annual Conference of the International Group for Lean Construction).
6.3.
2014
Thalfeldt, M.; Pikas, E.; Kurnitski, J.;Voll, H. (2014). Total economy of windows and facades in low energy office buildings. The REHVA European HVAC Journal, 19−24.
1.1.
2013
Thalfeldt, M.; Pikas, E.; Kurnitski, J.; Voll, H. (2013). Facade design principles for nearly zero energy buildings in a cold climate. Energy and Buildings, 67, 309−321. DOI: 10.1016/j.enbuild.2013.08.027.
1.1.
2013
Pikas, E.; Sacks, R.; Hazzan, O. (2013). Building Information Modeling Education for Construction Engineering and Management: Procedures and Implementation Case Study. Journal of Construction Engineering and Management, 139 (11), 1−20.
1.1.
2013
Sacks, R.; Pikas, E. (2013). Building Information Modeling Education for Construction Engineering and Management: Industry Requirements, State-of-the-Art and Gap Analysis. Journal of Construction Engineering and Management, 1−23.
1.2.
2013
Sacks, R.; Barak, R.; Belaciano, B.; Gurevich, U.; Pikas, E. (2013). KanBIM Lean Construction workflow Management System: Prototype implementation and Field Testing. Lean Construction Journal, 2013, 19−35.
6.3.
2013
Pikas, E. (2013). Timmitud ehituse seminaril kohtus teooria praktikaga [Lean construction theory and practise meet]. Ehitaja, 20−22.
3.1.
2012
Pikas, E.; Sacks, R.; Priven, V. (2012). Go or No-Go Decisions at the Workface: Uncertainity, Percpetions of Readiness, Making Ready and Making-Do. In: I. D. Tommelein, C. L. Pasquire (Ed.). Are We Near a Tipping Point? (1−10). . San Diego, CA, USA: Montezume Publishing. (Proceedings of IGLC20: 20th Annual Conference of the International Group on Lean Construction).
6.3.
2012
Pikas, Ergo (2012). Muutused ehitusvaldkonnas sünnivad hariduse kaudu [Changing construction industry through eduction]. Ehitaja, 20−22.
3.1.
2011
Sacks, R.; Pikas, E. (2011). Crusell Bridge - A Building Model Supports a Wide Variety of Information, Uses of BIM in the Construction Stage. In: BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors (494−513). . Wiley-Blackwell.
3.4.
2011
Pikas, E.; Koskela, L.; Sapountzis, S.; Dave, B.; Owen, R. (2011). Overview of Building Information Modelling in Healtcare Projects. In: J. Barlow, J. O'Sullivan, B. Trimcev (Ed.). HaCIRIC 11 Conference proceedings (286−297). . HaCIRIC, Imperial College, Tanaka Business School.
6.3.
2010
Pikas, E. (2010). Ehitusinfo modelleerimisest võidab kõige enam klient [Client wins the most from implementing Building Information Modelling]. Ehitaja, 28−29.
6.3.
2010
Pikas, Ergo (2010). Timmitud ehituse ellurakendamine lubab põhimõttelisi muutusi ehitusvaldkonnas [Lean construction implimentation is fundamentally changing the delivery of construction projects]. Ehitaja, 20−21.
15.04.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 8 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
MUUVFP17100BIM'i kasutamise võrgustik enegriatõhususe suurendamiseks03.07.201703.01.2020Targo KalameesTallinna Tehnikaülikool, Inseneriteaduskond, Ehituse ja arhitektuuri instituut75 075,00 EUR
MUUVERT15041Ehitatud keskkonna erinevad osad: interdistsiplinaarse kõrghariduse edendamine Balti mere piirkonnas01.09.201501.09.2018Roode LiiasTallinna Tehnikaülikool, Ehitusteaduskond, Ehitustootluse instituut, Ehitusökonoomika ja -juhtimise õppetool48 703,00 EUR
MUULEP15064IPD kontseptsiooni arendamine RKASis14.07.201530.06.2016Roode LiiasTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Ehitusteaduskond, Ehitustootluse instituut, Ehitusökonoomika ja -juhtimise õppetool36 000,00 EUR
MUULEP15049Korrashoiu BIM ehitusteabe nõuete kirjeldamine ja kvaliteedi tagamine19.05.201530.06.2016Ergo PikasTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Ehitusteaduskond, Ehitustootluse instituut, Ehitusökonoomika ja -juhtimise õppetool25 875,00 EUR
MTTMTT74Liginullenergiamajad (nZEB) Eestis: tehnilised lahendused transformatsiooniks ja kuluoptimaalsuse analüüsid01.04.201231.07.2015Jarek KurnitskiTallinna Tehnikaülikool, Ehitusteaduskond426 668,00 EUR
MUULMIN13063Parameetriliste tootekataloogide põhimõtete väljatöötamine ning parameetrilise tootekataloogide keskkonna loomise alternatiivide väljatöötamine10.04.201315.11.2013Roode LiiasTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Ehitusteaduskond, Ehitustootluse instituut, Ehitusökonoomika ja -juhtimise õppetool9 500,00 EUR
MUULep13047Rakvere Targa Maja kompetentsikeskuse testkeskkondade kujundamine ja energiaanalüüs liginullenergiahoone võimaluste hindamiseks17.12.201231.12.2014Jarek KurnitskiTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Ehitusteaduskond, Ehitiste projekteerimise instituut, Ehituskonstruktsioonide õppetool33 627,00 EUR
1.1.LMIN19072Riigieelarvelise sihtotstarbelise eraldise kasutamiseks hoonete energiatõhususe alase teadus- ja arendustegevuse tugevdamiseks01.10.201931.12.2020Jarek KurnitskiTallinna Tehnikaülikool, Inseneriteaduskond, Ehituse ja arhitektuuri instituut75 000,00 EUR