See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Harri Annuka

https://www.etis.ee/CV/Harri_Annuka/est
29.01.1946
6 20 31 01
53 40 69 47
annuka46@hot.ee
ETF 9333

Teenistuskäik

Töökohad ja ametid
01.09.2021–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Emeriitdotsent (1,00)
01.01.2017–30.06.2022   
Tallinna Tehnikaülikool, Inseneriteaduskond, Ehituse ja arhitektuuri instituut, Lektor (1,00)
01.09.2016–31.12.2016   
Tallinna Tehnikaülikool, Ehitusteaduskond, Arhitektuuri- ja urbanistikainstituut, Insenerigraafika lektoraat, Lektor (1,00)
01.07.2013–31.08.2016   
Tallinna Tehnikaülikool, Ehitusteaduskond, Arhitektuuri- ja urbanistikainstituut, Insenerigraafika lektoraat, Dotsent (1,00)
01.01.2010–30.06.2013   
Tallinna Tehnikaülikool, Ehitusteaduskond, Insenerigraafika keskus, juhataja
01.01.2010–30.06.2013   
Tallinna Tehnikaülikool, Ehitusteaduskond, Insenerigraafika keskus, Kujutava geomeetria lektoraat, Dotsent (1,00)
01.01.2006–31.12.2009   
Tallinna Ülikool, matemaatika ja loodusteaduste instituut, tööõpetuse osakond, dotsent (0,5)
01.01.2001–31.12.2009   
TTÜ, dotsent (1,00)
01.01.1997–31.12.2001   
EV välisministeerium, III sekretär
01.01.1993–31.12.1997   
TTÜ, dotsent
01.01.1988–31.12.1993   
TTÜ, vanemõpetaja
01.01.1969–31.12.1988   
TPI, assistent
 
 
Haridustee
1964–1969   
kõrgharidus, Riia Polütehniline Instituut
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2002−...   
International Scientific Commitee BaltGRAF liige,
2002−...   
International Association BaltGRAF Editional Boardi liige,
2013−2016   
Tallinna Tehnikaülikool, Ehitusteaduskond, Arhitektuuri- ja urbanistikainstituudi nõukogu liige
2010−2013   
ehitusteaduskonna nõukogu liige,
2005−2006   
35th International IGIP Symposium Programm Committee liige,
2001−2013   
insenerigraafika keskuse nõukogu liige,
2001−2013   
insenerigraaafika keskuse juhataja,
 
 
Lisainfo
ETF 9333

Kvalifikatsioon

Teaduskraadid
Harri Annuka, doktorikraad, 1999, (juh) Jakob Kübarsepp, Titaankarbiidsete rauasulamite baasil sideainetega kermiste iseloomustus ja kasutusvaldkonnad, Tallinna Tehnikaülikool.
Harri Annuka, magistrikraad (teaduskraad), 1993, (juh) Jakob Kübarsepp, Terassideainega kõvasulamite abrasiiv-erosioonkulumine, Tallinna Tehnikaülikool, Mehaanikateaduskond.
 
 
Teaduspreemiad ja tunnustused
2004, Harri Annuka, International Engineering Educator,ING- PAED IGIP tiitel
 
 
Teadustöö põhisuunad
ETIS VALDKOND: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus
 
 
Lisainfo
tehnikadoktor
TTÜ, 1999

Lõppenud projektid

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
3.4.
2017
Hunt, T., Annuka, H. (2017). Descriptive geometry course and multi-cultural environment. Engineering Graphics BALTGRAF-14 : Proceedings of the Fourteenth International Conference : Tallinn, Estonia, June 1-2, 2017: Baltgraf-14, Tallinn Estonia, June 1-2, 2017. Ed. T. Hunt. Tallinna Tehnikaülikool: Tallinna Tehnikaülikool, 51−54.
6.2.
2015
Letunovitš, S.; Annuka, H. (2015). Insenerigraafika kursus. Harjutusülesanded. Tallinn: [Tallinna Tehnikaülikooli Kirjastus].
6.2.
2013
Letunovitš, S.; Annuka, H. (2013). Insenerigraafika kursus. Harjutusülesanded. Tallinna Tehnikaülikooli Kirjastus.
3.1.
2011
Kübarsepp, J.; Klaasen, H.; Tsinjan, A.; Roosaar, T.; Annuka, H. (2011). Wear performance of WC- and TiC- based ceramic-metallic composites. In: Proceedings of VI International Scientific Conference BALTTRIB 2011 (150−155).. Kaunas, Lithuania: Lithuanian University of agriculture.
6.2.
2011
Kivi, Kalle; Lüiste, Aivar; Lips, Aron; Hunt, Tea; Annuka, Harri; Letunovitš, Sergei. (2011). 3D modelleerimine. CNC pink. Joonestamine. Tiigrihüppe sihtasutus.
1.2.
2009
Tšinjan, A.; Klaasen, H.; Kübarsepp, J.; Annuka, H. (2009). Influence of sintering techniques on the performance characteristics od steel-bonded TiC-based cermets. Estonian Journal of Engineering, 15 (4), 283−292.
5.2.
2006
Kübarsepp, J.; Klaasen, H.; Roosaar, T.; Annuka, H. (2006). Abrasive Wear and Mechanical Properties of Carbide Composites. 15th international Baltic conference "Engineering materials & tribology. Baltmattrib-2006" : October 5-6, 2006, Tallinn, Estonia : abstracts: 15th International Baltic Conference Engineering Materials Tribology. Baltmattrib- 2006 October 5- 6, 2006, Tallinn, Estonia. Tallinn: Tallinna Tehnikaülikool, 56−57.
3.1.
2004
"Annuka, Harri;Klaasen, Heinrich;Kübarsepp, Jakob;Suvi, Vahur" (2004). Adhesive wear behaviour of carbide composites and tool steels. Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn University of Technology, 175−176.
3.1.
2004
Klaasen, H.; Kübarsepp, J.; Annuka, H. (2004). Adhesive Wear Behaviour of Hard Alloys. In: Materials of the XIII International Baltic Conference Engineering Materials & Tribology, September 23- 24, Riga, Latvia (114−115). . Riga Technical University.
5.2.
2004
Annuka, H.; Hunt, T. (2004). e-Learning and Descriptive Geometry. Proceeding of the 7 th International Conference Engineering Graphics BALTGRAF- 7, May 27- 28, Vilnius, Lithuania (152−155). .
2.3.
1999
Annuka, H. (1999). Characterization and application of TiC-based iron alloys bonded cermets. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: Tallinn Technical University Press.
3.4.
1999
Kübarsepp, J.; Reshetnyak, H.; Annuka, H. (1999). Wear resistance assessment of cermets and hardmetals. International Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania : proceedings. Kaunas: Lithuanian University of agriculture, 76−84.
3.2.
1998
Kübarsepp, J.; Annuka, H.; Reshetnjak, H. (1998). Significance of structural characteristics on wear resistance of hardmetals. Proceedings of the Third National DAAAM Conference in Estonia "Science '98": Tthe Third National DAAAM Conference in Estonia : SCIENCE '98, Tallinn, 1998. Tallinn: Tallinn University of Technology Press, 90−93.
3.4.
1998
Kübarsepp, J.; Pirso, J.; Annuka, H. (1998). The features of wear and application of hardmetals. In: Mekaaniset kulumisilmiöt ja kulutusta kestävät materiaalit (14.1−14.5).. Tampere: Tampere University of Technology.
3.4.
1998
Kübarsepp, J.; Reshetnjak, H.; Pirso, J.; Annuka, H. (1998). Features of wear of TiC-base hardmetals. Proceedings of the World Congress and Exhibition on Powder Metallurgy: World Congress and Exhibition on Powder Metallurgy, October 18-22, Granada (Spain). London: European Powder Metallurgy Association, 75−79.
5.2.
1997
Kübarsepp, J.; Pirso, J.; Annuka, H. (1997). Non-tungsten and non-cobalt cermets with designed serviceability characteristics. Abstracts of 7th international Exhibition and Symposium on powder Metallurgy: 7th International Exhibition and Symposium on Powder Metallurgy, March 18-21 Minsk, Belorussia. Minsk: Belorussian Academy of Sciences, 91.
1.1.
1994
Kubarsepp, J.; Reshetnyak, H.; Annuka, H. (1994). Characterization of the serviceability of steel-bonded hardmetals. International Journal of Refractory Metals and Hard Materials, 12 (6), 341−348.
1.2.
1993
Kübarsepp, J.; Annuka, H.; Valdma, L. (1993). Application Areas of Steel- bonded Cermets as Tool and Structural Material. Вестник машиностроения = Vestnik Mashinostroenija, 3, 31−35.
27.08.2021

Harri Annuka

https://www.etis.ee/CV/Harri_Annuka/eng
29.01.1946
6 20 31 01
53 40 69 47
annuka46@hot.ee
ETF 9333

Career

Institutions and positions
01.09.2021–...   
Tallinn University of Technology , School of Engineering, Associate Professor emeritus (1,00)
01.01.2017–30.06.2022   
Tallinn University of Technology , School of Engineering, Department of Civil Engineering and Architecture, Lecturer (1,00)
01.09.2016–31.12.2016   
Tallinn University of Technology , Faculty of Civil Engineering, Department of Architecture and Urban Studies, Unit of Engineering Graphics, Lecturer (1,00)
01.07.2013–31.08.2016   
Tallinn University of Technology , Faculty of Civil Engineering, Department of Architecture and Urban Studies, Unit of Engineering Graphics, Associate Professor (1,00)
01.01.2010–30.06.2013   
Tallinn University of Technology , Faculty of Civil Engineering, Centre of Engineering Graphics, Other staff
01.01.2010–30.06.2013   
Tallinn University of Technology , Faculty of Civil Engineering, Centre of Engineering Graphics, Unit of Descriptive Geometry, Associate Professor (1,00)
01.01.2006–31.12.2009   
Tallinn University, Institute of Mathematics and Natural Sciences, Department of Craft, Associate Professor (0,500)
01.01.2001–31.12.2009   
TUT, Associate Pofessor (1,00)
01.01.1997–31.12.2001   
Ministry of Foreign Affairs, III Secretary, 1997- 2001
01.01.1993–31.12.1997   
TUT, Associate Professor,1993-1997
01.01.1988–31.12.1993   
TUT, Senior Instructor, 1988- 1993
01.01.1969–31.12.1988   
TUT, Teaching Assistent, 1969- 1988
 
 
Education
1964–1969   
higher education, Riga Polytechnical Institut, 1969
 
 
R&D related managerial and administrative work
2002−...   
Member of International Scientific Commitee BaltGRAF ,
2002−...   
Member of Editional Board of International Association BaltGRAF,
2013−2016   
Member of Council of Department Architecture and Urban Studies
2010−2013   
Member of Council of Faculty of of Civil Engineering,
2005−2006   
Member of Programm Committee of 35th International IGIP Symposium
2001−2013   
Member of Council of Centre of Engineering Grafics,
2001−2013   
Head of Centre of Engineering Grafics,
 
 
Additional information
ETF 9333

Qualifications

Academic degrees
Harri Annuka, Doctor's Degree, 1999, (sup) Jakob Kübarsepp, Titaankarbiidsete rauasulamite baasil sideainetega kermiste iseloomustus ja kasutusvaldkonnad (Characterization and application of TiC-based iron alloys bonded cermets), Tallinn University of Technology.
Harri Annuka, Research Master's Degree, 1993, (sup) Jakob Kübarsepp, Terassideainega kõvasulamite abrasiiv-erosioonkulumine, Tallinn University of Technology Faculty of Mechanical Engineering.
 
 
Honours & awards
2004, Harri Annuka, International Engineering Educator,Title of ING- PAED IGIP
 
 
Fields of research
ETIS RESEARCH FIELD: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science
 
 
Additional information
Doctor of Engineering
TUT, 1999

Completed projects

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
3.4.
2017
Hunt, T., Annuka, H. (2017). Descriptive geometry course and multi-cultural environment. Engineering Graphics BALTGRAF-14 : Proceedings of the Fourteenth International Conference : Tallinn, Estonia, June 1-2, 2017: Baltgraf-14, Tallinn Estonia, June 1-2, 2017. Ed. T. Hunt. Tallinna Tehnikaülikool: Tallinna Tehnikaülikool, 51−54.
6.2.
2015
Letunovitš, S.; Annuka, H. (2015). Insenerigraafika kursus. Harjutusülesanded. Tallinn: [Tallinna Tehnikaülikooli Kirjastus].
6.2.
2013
Letunovitš, S.; Annuka, H. (2013). Insenerigraafika kursus. Harjutusülesanded. Tallinna Tehnikaülikooli Kirjastus.
3.1.
2011
Kübarsepp, J.; Klaasen, H.; Tsinjan, A.; Roosaar, T.; Annuka, H. (2011). Wear performance of WC- and TiC- based ceramic-metallic composites. In: Proceedings of VI International Scientific Conference BALTTRIB 2011 (150−155).. Kaunas, Lithuania: Lithuanian University of agriculture.
6.2.
2011
Kivi, Kalle; Lüiste, Aivar; Lips, Aron; Hunt, Tea; Annuka, Harri; Letunovitš, Sergei. (2011). 3D modelleerimine. CNC pink. Joonestamine. Tiigrihüppe sihtasutus.
1.2.
2009
Tšinjan, A.; Klaasen, H.; Kübarsepp, J.; Annuka, H. (2009). Influence of sintering techniques on the performance characteristics od steel-bonded TiC-based cermets. Estonian Journal of Engineering, 15 (4), 283−292.
5.2.
2006
Kübarsepp, J.; Klaasen, H.; Roosaar, T.; Annuka, H. (2006). Abrasive Wear and Mechanical Properties of Carbide Composites. 15th international Baltic conference "Engineering materials & tribology. Baltmattrib-2006" : October 5-6, 2006, Tallinn, Estonia : abstracts: 15th International Baltic Conference Engineering Materials Tribology. Baltmattrib- 2006 October 5- 6, 2006, Tallinn, Estonia. Tallinn: Tallinna Tehnikaülikool, 56−57.
3.1.
2004
"Annuka, Harri;Klaasen, Heinrich;Kübarsepp, Jakob;Suvi, Vahur" (2004). Adhesive wear behaviour of carbide composites and tool steels. Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn University of Technology, 175−176.
3.1.
2004
Klaasen, H.; Kübarsepp, J.; Annuka, H. (2004). Adhesive Wear Behaviour of Hard Alloys. In: Materials of the XIII International Baltic Conference Engineering Materials & Tribology, September 23- 24, Riga, Latvia (114−115). . Riga Technical University.
5.2.
2004
Annuka, H.; Hunt, T. (2004). e-Learning and Descriptive Geometry. Proceeding of the 7 th International Conference Engineering Graphics BALTGRAF- 7, May 27- 28, Vilnius, Lithuania (152−155). .
2.3.
1999
Annuka, H. (1999). Characterization and application of TiC-based iron alloys bonded cermets. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: Tallinn Technical University Press.
3.4.
1999
Kübarsepp, J.; Reshetnyak, H.; Annuka, H. (1999). Wear resistance assessment of cermets and hardmetals. International Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania : proceedings. Kaunas: Lithuanian University of agriculture, 76−84.
3.2.
1998
Kübarsepp, J.; Annuka, H.; Reshetnjak, H. (1998). Significance of structural characteristics on wear resistance of hardmetals. Proceedings of the Third National DAAAM Conference in Estonia "Science '98": Tthe Third National DAAAM Conference in Estonia : SCIENCE '98, Tallinn, 1998. Tallinn: Tallinn University of Technology Press, 90−93.
3.4.
1998
Kübarsepp, J.; Pirso, J.; Annuka, H. (1998). The features of wear and application of hardmetals. In: Mekaaniset kulumisilmiöt ja kulutusta kestävät materiaalit (14.1−14.5).. Tampere: Tampere University of Technology.
3.4.
1998
Kübarsepp, J.; Reshetnjak, H.; Pirso, J.; Annuka, H. (1998). Features of wear of TiC-base hardmetals. Proceedings of the World Congress and Exhibition on Powder Metallurgy: World Congress and Exhibition on Powder Metallurgy, October 18-22, Granada (Spain). London: European Powder Metallurgy Association, 75−79.
5.2.
1997
Kübarsepp, J.; Pirso, J.; Annuka, H. (1997). Non-tungsten and non-cobalt cermets with designed serviceability characteristics. Abstracts of 7th international Exhibition and Symposium on powder Metallurgy: 7th International Exhibition and Symposium on Powder Metallurgy, March 18-21 Minsk, Belorussia. Minsk: Belorussian Academy of Sciences, 91.
1.1.
1994
Kubarsepp, J.; Reshetnyak, H.; Annuka, H. (1994). Characterization of the serviceability of steel-bonded hardmetals. International Journal of Refractory Metals and Hard Materials, 12 (6), 341−348.
1.2.
1993
Kübarsepp, J.; Annuka, H.; Valdma, L. (1993). Application Areas of Steel- bonded Cermets as Tool and Structural Material. Вестник машиностроения = Vestnik Mashinostroenija, 3, 31−35.
27.08.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Uus otsing (Beetaversioon) Lihtotsing Tühjenda
  • Leitud 1 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
ETFETF5882Komplitseeritud töötingimustes töötavate karbiidkermiste tehnoloogia01.01.200431.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond43 094,49 EUR