Jaan Leis

6.03.1967
+372 5340 6581
jaan.leis@ut.ee

Teenistuskäik

Töökohad ja ametid
2009–...    Skeleton Technologies OÜ, juhtivteadur (0,50)
01.09.2009–31.08.2014    Tartu Ülikool, Loodus- ja tehnoloogiateaduskond, Tartu Ülikooli Keemia Instituut, molekulaartehnoloogia vanemteadur (0,50)

Kvalifikatsioon

 
 
Teaduspreemiad ja tunnustused
2000, Jaan Leis, CV on avaldatud kogumikus "Who Is Who in the World"

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2017
1.1.
2016
1.2.
2013
3.4.
2013
3.4.
2011
6.3.
2011
1.1.
2010
1.1.
2010
1.1.
2010
1.1.
2010
3.1.
2010
3.4.
2010
3.4.
2010
6.6.
2010
1.1.
2009
3.1.
2009
1.1.
2008
1.1.
2008
1.1.
2008
1.1.
2007
3.5.
2007
6.6.
2007
1.1.
2006
1.1.
2006
1.1.
2006
3.4.
2006
6.6.
2006
1.1.
2005
3.4.
2005
1.1.
2004
1.1.
2003
1.1.
2002
1.1.
2001
1.1.
2001
5.2.
2001
1.1.
1999
1.2.
1999
1.1.
1998
1.1.
1998
1.1.
1998
1.1.
1998
2.3.
1998
1.1.
1996

Tööstusomand

Tööstusomand

Jaan Leis

6.03.1967
+372 5340 6581
jaan.leis@ut.ee

Career

Institution and position
01.01.2016–31.08.2017    University of Tartu, Faculty of Science and Technology, Institute of Chemistry, Senior Researcher (0,50)
2009–...    Skeleton Technologies OÜ, lead scientist (0,50)
01.09.2014–31.12.2015    University of Tartu, Faculty of Science and Technology (old), Institute of Chemistry, Tartu University, Senior Researcher (0,50)
01.09.2009–31.08.2014    University of Tartu, Faculty of Science and Technology (old), Institute of Chemistry, Tartu University, Senior Researcher (0,50)
2008–2009    Carbon Nanotech, Project leader (0,50)
01.01.2008–31.08.2009    University of Tartu, Faculty of Science and Technology (old), Institute of Chemistry, Tartu University, Senior Researcher (0,50)
01.08.2007–31.12.2007    University of Tartu, Faculty of Science and Technology (old), Institute of Chemistry, Tartu University, Senior Researcher (0,50)
01.09.2004–31.07.2007    University of Tartu, Faculty of Physics and Chemistry, Institute of Chemical Physics, Senior Researcher (0,50)
2003–2008    Tartu Technologies Ltd., Project leader (0,50)
2002–2004    University of Tartu, Faculty of Physics and Chemistry, Institute of Chemical Physics, Extraordinary Senior Researcher (0,50)
2000–2001    University of Tartu, Faculty of Science and Technology (old), Institute of Physics, University of Tartu, post-doctoral fellow (1,00)
1999–2003    Tartu Technologies Ltd., chemist-technologist (0,50)
1998–1999    University of Tartu, Faculty of Physics and Chemistry, Institute of Chemical Physics, Researcher (1,00)
01.01.1997–31.12.1997    University of Turku, Finland, research fellow (6 months)
1996–1998    University of Tartu, Faculty of Physics and Chemistry, Institute of Chemical Physics, Chemist (1,00)
01.01.1995–31.12.1996    Uppsala University, Sweden, research fellow (6 months)
01.01.1993–31.12.1995    University of Kiel, Germany, research fellow (2 x 6 months)

Qualifications

 
 
Honours & awards
2000, Jaan Leis, CV is published in "Who Is Who in the World"
 
 
Field of research
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.11. Chemistry and Chemical Technology; CERCS SPECIALTY: T370 Carbochemistry, petrochemistry, fuels and explosives technology ; SPECIALITY: Carbide-derived carbon
FIELD OF RESEARCH: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS SPECIALTY: T152 Composite materials ; SPECIALITY: Nanostructured carbon materials: synthesis, properties and applications
 
 

Publications

Category
Year
Publication
 
1.1.
2017
1.1.
2016
1.2.
2013
3.4.
2013
3.4.
2011
6.3.
2011
1.1.
2010
1.1.
2010
1.1.
2010
1.1.
2010
3.1.
2010
3.4.
2010
3.4.
2010
6.6.
2010
1.1.
2009
3.1.
2009
1.1.
2008
1.1.
2008
1.1.
2008
1.1.
2007
3.5.
2007
6.6.
2007
1.1.
2006
1.1.
2006
1.1.
2006
3.4.
2006
6.6.
2006
1.1.
2005
3.4.
2005
1.1.
2004
1.1.
2003
1.1.
2002
1.1.
2001
1.1.
2001
5.2.
2001
1.1.
1999
1.2.
1999
1.1.
1998
1.1.
1998
1.1.
1998
1.1.
1998
2.3.
1998
1.1.
1996

Industrial property

Industrial property
  • Leitud 43 kirjet
PublikatsioonKlassifikaatorFail
Ratso, S; Kruusenberg, I.; Käärik, M.; Kook, M.; Saar, R.; Pärs, M.; Leis, J.; Tammeveski, K. (2017). Highly efficient nitrogen-doped carbide-derived carbon materials for oxygen reduction reaction in alkaline media. Carbon, 113, 159−169, 10.1016/j.carbon.2016.11.037.1.1.
Rauhala, Rauhala; Leis, Jaan; Kallio, Tanja; Vuorilehto, Kai (2016). Lithium-ion capacitors using carbide-derived carbon as the positive electrode - A comparison of cells with graphite and Li4Ti5O12 as the negative electrode. Journal of Power Sources, 331, 156−166.1.1.
Leis, J.; Torop, J.; Käärik, M.; Aabloo, A.; Arulepp, M.; Madiberk, T.; Ehin, R. (2013). Nanotuned carbide-derived carbon as a potential low-voltage actuator in lab-on-chip applications for blood analysis and point-of-care medicine. Journal for Clinical Studies, 5 (3), 34−37.1.2.
Leis, J.; Arulepp, M. (2013). High power and energy density ultracapacitors in space environment. Space Passive Component Days - 2013, Conference Proceedings: Space Passive Component Days, 1st International Symposium. ESA/ESTEC; Noordwijk, The Netherlands; 24-26 September 2013. Ed. Holly Krijgsman. European Space Components Information Exchange System,.3.4.
Kesküla, A.; Arulepp, M.; Perkson, A.; Käärik, M.; Kuura, H.; Leis, J. (2011). Activation of CDC materials for the energy storage. Proceedings of 2nd European Advanced Automotive Battery Conference. Posters presentation.: 2nd European Advanced Automotive Battery Conference, Mainz, Germany, June 7-10, 2011. Advanced Automotive Batteries,.3.4.
Leis, J. (2011). Üksainus küsimus nanopoorsest süsinikust ja superkondensaatoritest. Horisont, 2, 6.6.3.
Lätt, M.; Käärik, M.; Permann, L.; Kuura, H.; Arulepp, M.; Leis, J. (2010). A structural influence on the electrical double-layer characteristics of Al4C3-derived carbon. Journal of Solid State Electrochemistry, 543−548, 10.1007/s10008-008-0659-3.1.1.
Torop, J.; Arulepp, M.; Leis, J.; Punning, A.; Johanson, U.; Palmre, V.; Aabloo, A. (2010). Nanoporous carbide-derived carbon material-based linear actuators. Materials, 3 (1), 9−25, 10.3390/ma3010009.1.1.
Kruusenberg, I.; Leis, J.; Arulepp, M.; Tammeveski, K. (2010). Oxygen reduction on carbon nanomaterial-modified glassy carbon electrodes in alkaline solution. Journal of Solid State Electrochemistry, 14 (7), 1269−1277, DOI10.1007/s10008-009-0930-2.1.1.
Leis, J.; Arulepp, M.; Käärik, M.; Perkson, A. (2010). The effect of Mo2C derived carbon pore size on the electrical double-layer characteristics in propylene carbonate-based electrolyte. Carbon, 48 (14), 4001−4008, 10.1016/j.carbon.2010.07.003.1.1.
Torop, Janno; Sugino, Takushi; Asaka, Kinji; Arulepp, Mati; Leis, Jaan; Aabloo, Alvo (2010). Nanoporous Carbide-derived Carbon Material for Bending Actuators. ACTUATOR 10, CONFERENCE PROCEEDINGS: 12th International Conference on New Actuators/6th International Exhibition on Smart Actuators and Drive Systems Bremen; GERMANY; JUN 14-16, 2010. Ed. Borgmann, H. . 369−372. (Actuator-International Conference and Exhibition on New Actuators and Drive Systems).3.1.
Arulepp, M.; Leis, J.; Käärik, M.; Perkson, A. (2010). Carbide-Derived Carbons as Capacitor Materials. Proceedings of the sixth International Symposium on Large EC capacitors Technology and applications: Advanced Automotive Battery and EC Capacitor Conference; Omni Orlando Resort, Orlando, Florida, USA; May 17-21, 2010 . Orlando, Florida, USA: Advanced Automotive Batteries, 55−64.3.4.
Kesküla, A.; Käärik, M.; Kuura, H.; Arulepp, M.; Leis, J. (2010). Karbiidset päritolu süsinikmaterjalide rakendus kerglenduvate ühendite adsorptsiooniks. Eesti XXXI keemiapäevad, Talinn, Eesti, 28.04.2010. Tallinn,.3.4.
Rumma, K.; Arulepp, M.; Madiberk, V.; Leis, J. (2010). Superkondensaator – uue põlvkonna energiaallikas. Eesti Mereakadeemia Toimetised, 11, 42−48.6.6.
Bystrzejewski, M.; Arulepp, M; Leis, J.; Huczko, A.; Lange, H. (2009). Electrochemical characterization of core-shell carbon-encapsulated magnetic nanoparticles. Materials Letters, 63 (16), 1435−1438, 10.1016/j.matlet.2009.03.033.1.1.
Torop, J.; Arulepp, M.; Leis, J.; Punning, A.; Johanson, U.; Aabloo, A. (2009). Low voltage linear actuators based on carbide-derived carbon powder. Proc. SPIE: Electroactive Polymer Actuators and Devices (EAPAD) 2009, San Diego, CA, USA. Ed. Yoseph Bar-Cohen, Thomas Wallmersperger. San Diego, CA, USA: Spie - International Society For Optical Engineering,. (7287).3.1.
Fernández, A.; Arulepp, M.; Leis, J.; Stoeckli, F.; Centeno, T.A. (2008). EDLC performance of carbide-derived carbons in aprotic and acidic electrolytes. Electrochimica Acta, 53 (24), 7111−7116, 10.1016/j.electacta.2008.05.028.1.1.
Urbonaite, S.; Juàrez-Galàn, J.M.; Leis, J.; Rodriguez-Reinoso, F.; Svensson, G. (2008). Porosity development along the synthesis of carbons from metal carbides. Microporous and Mesoporous Materials, 113, 14−21.1.1.
Käärik, M.; Arulepp, M.; Karelson, M.; Leis, J. (2008). The effect of graphitization catalyst on the structure and porosity of SiC derived carbons. Carbon, 46 (12), 1579−1587.1.1.
Huczko, A.; Osica, M.; Bystrzejewski, M.; Lange, H.; Cudziło, S.; Leis, J.; Arulepp, M. (2007). Characterization of 1-D nanoSiC-derived nanoporous carbon. physica status solidi (b), 244 (11), 3969−3972, 10.1002/pssb.200776162.1.1.
Arulepp, M.; Leis, J.; Lätt, M.;Kuura, H.; Kuura, A.; Miller, F.; Rumma, K.; Madiberk, V. (2007). Superkondensaatorid karbiidset päritolu süsinikelektroodidega. Taastuvate energiaallikate uurimine ja kasutamine VIII ja IX konverentsi kogumik : VIII Taastuvate energiaallikate uurimine ja kasutamine; Tartu; 12. oktoobril 2006. Eesti Maaülikool, 15−24.3.5.
Arulepp, M.; Leis, J. (2007). Karbiidset päritolu süsinikelektroodidega superkondensaatorid. Keskkonnatehnika, 2, 32−36.6.6.
Permann, L.; Latt, M.; Leis, J.; Arulepp, M. (2006). Electrical double layer characteristics of nanoporous carbon derived from titanium carbide. Electrochimica Acta, 51 (7), 1274−1281.1.1.
Leis, J.; Arulepp, M.; Kuura, A.; Lätt, M.; Lust, E. (2006). Electrical double-layer characteristics of novel carbide-derived carbon materials. Carbon, 44 (11), 2122−2129.1.1.
Arulepp, M.; Leis, J.; Lätt, M.; Miller, F.; Rumma, K.; Lust, E.; Burke, A.F. (2006). The advanced carbide-derived carbon based supercapacitor. Journal of Power Sources, 162 (2), 1460−1466, 10.1016/j.jpowsour.2006.08.014.1.1.
  • Leitud 16 kirjet
TüüpPrioriteedi numberPrioriteedi kuupäevPrioriteedi klassifikaatorPealkiriAutoridFailAsutused
Patentne leiutisP2004000911.06.2004Rahvusvaheline (IPC) Meetod poorse süsinikmaterjali valmistamiseks ning selle meetodiga saadud poorne süsinikmaterjalJaan Leis; Mati Arulepp; Marko Lätt; Helle KuuraSkeleton Technologies OÜ
Patentne leiutis62/073,09031.10.2014Rahvusvaheline (IPC)A method for making a high-density carbon material for high-density carbon electrodesAnti Perkson; Mati Arulepp; Jaan LeisSkeleton Technologies OÜ
Patentne leiutisUS20070917541P11.05.2007Rahvusvaheline (IPC)A method for manufacturing of a smart packing materialMati Karelson; Kaupo Karelson; Jaan Leis; Neinar SeliRaidenil OÜ
Patentne leiutisP2010000514.06.2010Rahvusvaheline (IPC)A multicell super capacitor with the high operating voltageJaan Leis; Mati Arulepp; Vello MadiberkSkeleton Technologies OÜ
Patentne leiutisP20080004210.06.2008Rahvusvaheline (IPC)AktuaatorJaan Leis; Mati Arulepp; Janno Torop; Urmas Johanson; Alvo AablooTartu Ülikool;
Carbon.ee OÜ
Patentne leiutisUS 61/812,24115.04.2013Rahvusvaheline (IPC)An electrical double layer capacitor with a solid electrode assemblyJaan Leis; Mati Arulepp; Anti Perkson; Kusta Rumma; Taavi MadiberkSkeleton Technologies OÜ
Patentne leiutis61/408,63531.10.2010Rahvusvaheline (IPC)An electrical double layer capacitor with enhanced working voltageJaan Leis; Mati Arulepp; Anti PerksonSkeleton Technologies OÜ
Patentne leiutisP20100004229.04.2010Rahvusvaheline (IPC)Composite carbon electrode for electric double layer capacitor.Jaan Leis; Mati Arulepp; Anti PerksonSkeleton Technologies OÜ
Patentne leiutisUS62/301,6491.03.2016Rahvusvaheline (IPC)Flexible ultracapacitor and a method of making such ultracapacitorAndres Krumme; Natalja Savest; Jaan Leis; Mati Arulepp; Anti PerksonTallinna Tehnikaülikool;
Skeleton Technologies OÜ
Patentne leiutisP20050000918.04.2005Rahvusvaheline (IPC)Meetod poorse süsinikmaterjali valmistamiseks ning selle meetodiga saadud mikropoorne süsinikmaterjalMarko Lätt; Helle Kuura; Mati Arulepp; Jaan LeisSkeleton Technologies OÜ
Patentne leiutisSE9903079-331.08.1999Rahvusvaheline (IPC)Method for producing a nanotubular carbon material, and the material produced therebyJaan LeisUltratec Ltd
Patentne leiutisP20100007313.09.2010Rahvusvaheline (IPC)METHOD OF MANUFACTURE OF HOMODISPERSED SILICON CARBIDE - DERIVED CARBON COMPOSITESJaan Leis; Mati AruleppSkeleton Technologies OÜ
Patentne leiutis61/510,35821.07.2011Rahvusvaheline (IPC)Method of synthesis of electrocatalytically active porous carbonmaterial for oxygen reduction in low-temperature fuel cellsJaan Leis; Mati Arulepp; Maike Käärik; Anti PerksonSkeleton Technologies OÜ
Patentne leiutis61,722,7856.11.2012Rahvusvaheline (IPC)Microporous carbon materials for energy storageJaan Leis; Mati Arulepp; Maike KäärikSkeleton Technologies OÜ
Patentne leiutisP2010000686.09.2010Rahvusvaheline (IPC)SUPER CAPACITOR OF HIGH SPECIFIC CAPACITY AND ENERGY DENSITY AND THE STRUCTURE OF SAID SUPER CAPACITORJaan Leis; Vello Madiberk; Mati Arulepp; Kusta Rumma; Anti PerksonSkeleton Technologies OÜ
Patentne leiutis60/247,5939.11.2000USA (USPC)Supercapacitor and a method of manufacturing such a supercapacitorJaan Leis; Maletin, Y.; Strizhakova, N.; Kozachkov, S.; Mironova, A.; Podmogilny, S.; Danilin, V.; Kolotilova, J.; Izotov, Y.V.; Cederström, J.; Gordeev, S.; Kukushkina, J.; Sokolov, V.; Kravchik, A.; Perkson, A.; Arulepp, M.; Wallace, C.L.; Zheng, J.FOC Frankenburg Oil Company Est. (Lichtenstein)