See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Ott Pabut

https://www.etis.ee/CV/Ott_Pabut/est
2.01.1986
5164 457
ottpabut@hotmail.com

Teenistuskäik

Töökohad ja ametid
01.09.2009–31.03.2011   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, tehnik (0,25)
 
 
Haridustee
2010–2014   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehanotehnika doktorantuur
2008–2010   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Tehnikateaduste magister (Tootearendus)
2005–2008   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Tehnikateaduste bakalaureus (Tootearendus)

Kvalifikatsioon

Teaduskraadid
Ott Pabut, doktorikraad, 2015, (juh) Martin Eerme, Optimal Design of Slotless Permanent Magnet Generators (Uurdevabade püsimagnetgeneraatorite optimeerimismeetodid), Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut.
Ott Pabut, magistrikraad, 2010, (juh) Martin Eerme, AS Konesko tuulegeneraatori tugikonstruktsiooni arendus ja optimeerimine, Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootearenduse õppetool.
 
 

Lõppenud projektid

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2015
Pabut, O.; Eerme, M.; Kallaste, A.; Vaimann, T. (2015). Multi-Criteria Design Optimization of Ultra Large Diameter Permanent Magnet Generator. Elektronika ir Elektrotechnika, 21 (3), 42−48.10.5755/j01.eee.21.3.10278.
2.3.
2015
Pabut, O. (2015). Optimal Design of Slotless Permanent Magnet Generators. (Doktoritöö, Tallinna Tehnikaülikool.; Mehaanikateaduskond). Tallinn: TUT Press.
3.1.
2015
Pabut, O; Kirs, M.; Lend, H.; Tiirats, T. (2015). Optimal Structural Design of a Slotless Permanent Magnet Generator. Proceedings of the 10th International Conference of DAAAM Baltic Industrial Engineering 12-13th May 2015, Tallinn, Estonia, 1: 10th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 12-13th May 2015. Ed. Otto, T. Tallinn: Tallinn University of Technology.
3.1.
2014
Tiirats, T.; Pabut, O.; Kallaste, A.; Herranen, H.; Naar, H.; Vaimann, T. (2014). Analysis of Mechanical Vibrations Caused by Eccentricity in a Slow-Speed Slotless Permanent Magnet Generator. Electric Power Quality and Supply Reliability Conference PQ 2014: Electric Power Quality and Supply Reliability Conference PQ 2014, Rakvere, Estonia, June 11-13, 2014. IEEE, 1−5.
3.1.
2014
Pabut, O.; Lend, H.; Tiirats, T. (2014). Load Sensitivity Analysis of a Large Diameter Permanent Magnet Generator for Wind Turbines. Proceedings of the 9th International Conference of DAAAM Baltic Industrial Engineering 24-26th April 2014, Tallinn, Estonia, 1: 9th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 24-26 April 2014. _EditorsAbbr Otto, T. Tallinn: Tallinn University of Technology, 59−64.
3.2.
2013
Aruniit, A.; Kers, J.; Krumme, A.; Antonov, M.; Allikas, G.; Herranen, H.; Pabut, O. (2013). Wear resistance influencers of particle reinforced polymer composite. Proceedings of 19th International Conference on Composite Materials (ICCM19): The 19th International Conference on Composite Materials, Montreal, Canada, July 28 - August 2 2013. Ed. S. Van Hoa, P. Hubert. Canadian Association for Composite Structures and Materials.
3.1.
2012
Pabut, O.; Allikas, G.; Herranen, H.; Talalaev, R.; Vene, K. (2012). Model Validation and Structural Analysis of a Small Wind Turbine Blade. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 1: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. _EditorsAbbr Otto, T. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 74−79.
3.2.
2012
Kallaste, A.; Vaimann, T.; Pabut, O. (2012). Slow-Speed Ring-Shaped Permanent Magnet Generator for Wind Applications. 11th International Symposium “Topical Problems in the Field of Electrical and Power Engineering” and “Doctoral School of Energy and Geotechnology II”. Ed. Zakis, J. Tallinn: Elektriajam, 66−69.
3.2.
2012
Herranen, H.; Kers, J.; Preden, J.; Talalaev, R.; Eerme, M.; Majak, J.; Pohlak, M.; Allikas, G.; Pabut, O.; Lend, H. (2012). The influence of embedded electronics on the structural performance in carbon fiber laminates. Proceedings of Mechanics of Nano, Micro and Macro Composite Structures 2012: Mechanics of Nano, Micro and Macro Composite Structures, tORINO, 18-20 June 2012. Ed. A. Ferreira, E. Carrera. Torino, Italy,.
3.4.
2012
Allikas, G.; Kers, J.; Aruniit, A.; Herranen, H.; Eerme, M.; Majak, J.; Pohlak, M.; Pabut, O. (2012). Design of light-weight sandwich panels for trailers. Proceedings of the fifteenth European Conference on Composite Materials: Fifteenth European Conference on Composite Materials, Italy, June 24-28, 2012. Venice, Italy,.
3.5.
2012
Kallaste, A.; Vaimann, T.; Pabut, O. (2012). Aeglasekäiguline otsetoimeline püsimagnetgeneraator tuuleagregaatidele. TEUK XIV: Taastuvate energiaallikate uurimine ja kasutamine - neljateistkümnenda konverentsi kogumik: TEUK XIV: Taastuvate energiaallikate uurimine ja kasutamine, Tartu, 8. november 2012. Tartu: Eesti Maaülikool, 68−77.
1.1.
2011
Herranen, H.; Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M.; Kers, J.; Saarna, M.; Allikas, G.; Aruniit, A. (2011). Design and Testing of Sandwich Structures with Different Core Materials. Journal of Materials Science of Kaunas University of Technology, 17 (4), 1−6.
3.1.
2010
Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M. (2010). Design Optimization of Structural Components for Fatigue Loading. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn Technical University Press, 131−135.
25.11.2020

Ott Pabut

https://www.etis.ee/CV/Ott_Pabut/eng
2.01.1986
5164 457
ottpabut@hotmail.com

Career

Institutions and positions
01.09.2009–31.03.2011   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering , Other staff (0,25)
 
 
Education
2010–2014   
Tallinn University of Technology, Departmet of mechanics, Mechanotechnics PhD
2008–2010   
Tallinn University of Technology, Departmet of mechanics, Master of science (Product development)
2005–2008   
Tallinn University of Technology, Departmet of mechanics, Bachelor of science (Product development)

Qualifications

Academic degrees
Ott Pabut, Doctor's Degree, 2015, (sup) Martin Eerme, Optimal Design of Slotless Permanent Magnet Generators, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering.
Ott Pabut, Master's Degree, 2010, (sup) Martin Eerme, AS Konesko tuulegeneraatori tugikonstruktsiooni arendus ja optimeerimine, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering Chair of Product Development.
 
 

Completed projects

Publications

Category
Year
Publication
 
1.1.
2015
Pabut, O.; Eerme, M.; Kallaste, A.; Vaimann, T. (2015). Multi-Criteria Design Optimization of Ultra Large Diameter Permanent Magnet Generator. Elektronika ir Elektrotechnika, 21 (3), 42−48.10.5755/j01.eee.21.3.10278.
2.3.
2015
Pabut, O. (2015). Optimal Design of Slotless Permanent Magnet Generators. (Doktoritöö, Tallinna Tehnikaülikool.; Mehaanikateaduskond). Tallinn: TUT Press.
3.1.
2015
Pabut, O; Kirs, M.; Lend, H.; Tiirats, T. (2015). Optimal Structural Design of a Slotless Permanent Magnet Generator. Proceedings of the 10th International Conference of DAAAM Baltic Industrial Engineering 12-13th May 2015, Tallinn, Estonia, 1: 10th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 12-13th May 2015. Ed. Otto, T. Tallinn: Tallinn University of Technology.
3.1.
2014
Tiirats, T.; Pabut, O.; Kallaste, A.; Herranen, H.; Naar, H.; Vaimann, T. (2014). Analysis of Mechanical Vibrations Caused by Eccentricity in a Slow-Speed Slotless Permanent Magnet Generator. Electric Power Quality and Supply Reliability Conference PQ 2014: Electric Power Quality and Supply Reliability Conference PQ 2014, Rakvere, Estonia, June 11-13, 2014. IEEE, 1−5.
3.1.
2014
Pabut, O.; Lend, H.; Tiirats, T. (2014). Load Sensitivity Analysis of a Large Diameter Permanent Magnet Generator for Wind Turbines. Proceedings of the 9th International Conference of DAAAM Baltic Industrial Engineering 24-26th April 2014, Tallinn, Estonia, 1: 9th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 24-26 April 2014. _EditorsAbbr Otto, T. Tallinn: Tallinn University of Technology, 59−64.
3.2.
2013
Aruniit, A.; Kers, J.; Krumme, A.; Antonov, M.; Allikas, G.; Herranen, H.; Pabut, O. (2013). Wear resistance influencers of particle reinforced polymer composite. Proceedings of 19th International Conference on Composite Materials (ICCM19): The 19th International Conference on Composite Materials, Montreal, Canada, July 28 - August 2 2013. Ed. S. Van Hoa, P. Hubert. Canadian Association for Composite Structures and Materials.
3.1.
2012
Pabut, O.; Allikas, G.; Herranen, H.; Talalaev, R.; Vene, K. (2012). Model Validation and Structural Analysis of a Small Wind Turbine Blade. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 1: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. _EditorsAbbr Otto, T. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 74−79.
3.2.
2012
Kallaste, A.; Vaimann, T.; Pabut, O. (2012). Slow-Speed Ring-Shaped Permanent Magnet Generator for Wind Applications. 11th International Symposium “Topical Problems in the Field of Electrical and Power Engineering” and “Doctoral School of Energy and Geotechnology II”. Ed. Zakis, J. Tallinn: Elektriajam, 66−69.
3.2.
2012
Herranen, H.; Kers, J.; Preden, J.; Talalaev, R.; Eerme, M.; Majak, J.; Pohlak, M.; Allikas, G.; Pabut, O.; Lend, H. (2012). The influence of embedded electronics on the structural performance in carbon fiber laminates. Proceedings of Mechanics of Nano, Micro and Macro Composite Structures 2012: Mechanics of Nano, Micro and Macro Composite Structures, tORINO, 18-20 June 2012. Ed. A. Ferreira, E. Carrera. Torino, Italy,.
3.4.
2012
Allikas, G.; Kers, J.; Aruniit, A.; Herranen, H.; Eerme, M.; Majak, J.; Pohlak, M.; Pabut, O. (2012). Design of light-weight sandwich panels for trailers. Proceedings of the fifteenth European Conference on Composite Materials: Fifteenth European Conference on Composite Materials, Italy, June 24-28, 2012. Venice, Italy,.
3.5.
2012
Kallaste, A.; Vaimann, T.; Pabut, O. (2012). Aeglasekäiguline otsetoimeline püsimagnetgeneraator tuuleagregaatidele. TEUK XIV: Taastuvate energiaallikate uurimine ja kasutamine - neljateistkümnenda konverentsi kogumik: TEUK XIV: Taastuvate energiaallikate uurimine ja kasutamine, Tartu, 8. november 2012. Tartu: Eesti Maaülikool, 68−77.
1.1.
2011
Herranen, H.; Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M.; Kers, J.; Saarna, M.; Allikas, G.; Aruniit, A. (2011). Design and Testing of Sandwich Structures with Different Core Materials. Journal of Materials Science of Kaunas University of Technology, 17 (4), 1−6.
3.1.
2010
Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M. (2010). Design Optimization of Structural Components for Fatigue Loading. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn Technical University Press, 131−135.
25.11.2020